Date: Tue, 01 Apr 2003 23:07:58 +0900 From: miniyan <miniyan@kt.rim.or.jp> To: Maksim Yevmenkin <myevmenk@exodus.net> Cc: current@FreeBSD.ORG Subject: Re: bluetooth BW-BH02U reset failure Message-ID: <20030401222211.257C.MINIYAN@kt.rim.or.jp> In-Reply-To: <3E775939.3070907@exodus.net> References: <20030318235120.2559.MINIYAN@kt.rim.or.jp> <3E775939.3070907@exodus.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Maksim, It's slow response [...] > > what you need is Linux bluez-bluefw-0.9 package. in firmware/ > directory you will find two files: BCM2033-MD.hex (mini-driver) > and BCM2033-FW.bin (firmware). the loader itself is implemented > in bcm_usb.c file. I understand it. It's my further target. [...] > > right. you *will* get these errors if you disconnect the device > while stack is running (i.e. USB transfer is pending). i'm still > looking into USB code to find why i'm getting lots of IOERRORs > before CANCELLED. I've no special error on it. [...] > >>3) is it uhci or ohci USB controller? > > [...] I have another PC, which is Crusoe LAPTOP CASIO FIVA 206. This PC has OHCI root hub AcerLab M5237 (Aladdin-V) USB controller. I tried to connect mitsumi's dongle and rc.bluetooth. So this pc shows error. If you have any well-known problem with OHCI, please let me know or point information. # usbdevs -d -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), AcerLabs(0x0000), rev 1.00 uhub0 port 1 addr 2: full speed, power 200 mA, config 1, product 0x641f(0x641f), Mitsumi(0x03ee), rev 1.14 ubt0 port 2 powered # /etc/rc.bluetooth start ubt0 BD_ADDR: 00:a0:96:1f:d6:d6 Features: 0xff 0xff 0x5 00 00 00 00 00 <3-Slot> <5-Slot> <Encryption> <Slot offset> <Timing accuracy> <Switch> <Hold mode> <Sniff mode> <Park mode> <RSSI> <Channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <Power control> Max. ACL packet size: 128 bytes Number of ACL packets: 8 Max. SCO packet size: 64 bytes Number of SCO packets: 8 Could not execute command "initialize". Invalid argument # but console shows(sorry detailed value does not recognized. I just take picture and read text from it) .... Bad mbuf alloc flags: 1 Stack backtrace: backtrace(... mb_alloc(... m_get(1,8,... ng_btsocket_hcl_raw_send( send+0xd8 sosend( sendit( sendto( syscall( XInt0x80_syscall() at ... --- syscall (133),elp = ... > BTW you might want to check Pav Lucistnik's (pav@oook.cz) Bluetooth > on FreeBSD page. > > http://www.oook.cz/bsd/bluetooth.html > It's very good information. It's big helps for me. I trying to connect with this document. Unfortunately, I just finished hccontrol. h2ping looks strange. I just summarize it and send further mail. Thanks, Takahiko -- miniyan <miniyan@kt.rim.or.jp>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030401222211.257C.MINIYAN>