Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Oct 2003 12:29:54 +0100 (BST)
From:      Mark Willson <mark@hydrus.org.uk>
To:        mark@hydrus.org.uk, scott+freebsd@fishballoon.org
Cc:        freebsd-stable@freebsd.org
Subject:   Re: ATA failure with 4.6.2 & 250GB drive?
Message-ID:  <200310131129.h9DBTsk7047905@crimson.hydrus.org.uk>
In-Reply-To: <20031013102633.GB84877@llama.fishballoon.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Scott,

That, too, is a shared symptom.  I replaced the cable more in hope than
expectation...

-mark

> From owner-freebsd-stable@freebsd.org Mon Oct 13 11:33:32 2003
> Date: Mon, 13 Oct 2003 11:26:33 +0100
> From: Scott Mitchell <scott+freebsd@fishballoon.org>
> To: Mark Willson <mark@hydrus.org.uk>
> Cc: freebsd-stable@freebsd.org
> Subject: Re: ATA failure with 4.6.2 & 250GB drive?
>
> On Mon, Oct 13, 2003 at 11:12:33AM +0100, Mark Willson wrote:
> > I encountered a similar problem a while back, which turned out to be
> > caused by a bad IDE cable.  Worth a shot?
> > 
> > -mark
>
> Could be... the other drive on the same cable is fine, but I'm not sure
> that means anything or not.  Might give that a go before embarking on major
> upgrades.
>
> 	Scott
>
> -- 
> ===========================================================================
> Scott Mitchell           | PGP Key ID | "Eagles may soar, but weasels
> Cambridge, England       | 0x54B171B9 |  don't get sucked into jet engines"
> scott at fishballoon.org | 0xAA775B8B |      -- Anon
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200310131129.h9DBTsk7047905>