Date: Sun, 30 Nov 2003 16:56:37 +0100 From: Ronald Klop <ronald-freebsd4@klop.yi.org> To: Scott Mitchell <scott+freebsd@fishballoon.org> Cc: FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: Xircom pccard couldn't load/attach (with uname -a info) Message-ID: <oprzgjwn08bhn7s1@smtp.local> In-Reply-To: <20031129175611.GA789@llama.fishballoon.org> References: <oprzehunvobhn7s1@smtp.local> <oprzeh0ayrbhn7s1@smtp.local> <20031129175611.GA789@llama.fishballoon.org>
next in thread | previous in thread | raw e-mail | index | archive | help
------------6zsJypidOR8j4HsVetIzET Content-Type: text/plain; format=flowed; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hello, Here is the output. And the dmesg is attached. NEWCARD/OLDCARD??? I think NEWCARD. Nov 30 16:51:11 laptop kernel: xe0: <Xircom CreditCard Ethernet 10/100 + Modem 56> at port 0x2e8-0x2ef irq 11 function 0 config 39 on pccard0 Nov 30 16:51:12 laptop kernel: xe0: vendor = 0x0105 Nov 30 16:51:12 laptop kernel: xe0: product = 0x110a Nov 30 16:51:12 laptop kernel: xe0: prodext = 0x46 Nov 30 16:51:12 laptop kernel: xe0: vendor_str = Xircom Nov 30 16:51:12 laptop kernel: xe0: product_str = CreditCard Ethernet 10/100 + Modem 56 Nov 30 16:51:12 laptop kernel: xe0: cis3_str = CEM56 Nov 30 16:51:12 laptop kernel: xe0: cis4_str = 1.00 Nov 30 16:51:12 laptop kernel: xe0: Cannot allocate ioport Nov 30 16:51:12 laptop kernel: device_probe_and_attach: xe0 attach returned 12 Greetings, Ronald. PS: Please reply to ronald_at_cs_dot_vu_dot_nl to prevent spam. On Sat, 29 Nov 2003 17:56:11 +0000, Scott Mitchell <scott+freebsd@fishballoon.org> wrote: > On Sat, Nov 29, 2003 at 02:20:24PM +0100, Ronald Klop wrote: >> On Sat, 29 Nov 2003 14:17:01 +0100, Ronald Klop >> <ronald-freebsd4@klop.yi.org> wrote: >> >> >Hello, >> > >> >This card doesn't attach well. Other Xircom cards do. >> > >> >Nov 29 13:47:24 laptop kernel: xe0: <Xircom CreditCard Ethernet 10/100 >> >+ Modem 56> at port 0x2e8-0x2ef irq 11 function 0 config 39 on pccard0 >> >Nov 29 13:47:24 laptop kernel: device_probe_and_attach: xe0 attach >> >returned 12 >> > >> >Mail me if more info is needed. >> >> uname -a >> FreeBSD laptop 5.2-BETA FreeBSD 5.2-BETA #0: Sun Nov 23 22:09:51 CET >> 2003 root@henk.thuis.klop.ws:/usr/obj/usr/src/sys/LAPTOP i386 > > Hi Ronald, > > Could you try setting sysctl hw.xe.debug=1 and post the output? Also, > are > you using OLDCARD or NEWCARD? A full dmesg might be useful too... > I suspect there's a problem with the driver not knowing all the card IDs > that Xircom ever used, as well as probing some cards differently when run > under NEWCARD vs. OLDCARD. > > Cheers, > > Scott > -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ ------------6zsJypidOR8j4HsVetIzET Content-Disposition: attachment; filename=dmesg.boot Content-Type: application/octet-stream; name=dmesg.boot Content-Transfer-Encoding: 8bit Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-BETA #0: Sun Nov 23 22:09:51 CET 2003 root@henk.thuis.klop.ws:/usr/obj/usr/src/sys/LAPTOP Preloaded elf kernel "/boot/kernel/kernel" at 0xc06dc000. Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc06dc1a4. Preloaded elf module "/boot/kernel/elink.ko" at 0xc06dc250. Preloaded elf module "/boot/kernel/if_xe.ko" at 0xc06dc2fc. Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc06dc3a8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06dc454. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc06dc500. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 100622336 (95 MB) avail memory = 92299264 (88 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00f0990 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:12 INTA BIOS irq 11 pci_cfgintr: 0:12 INTA BIOS irq 11 pci_cfgintr: 0:14 INTA BIOS irq 11 pcib1: <PCI-PCI bridge> at device 0.1 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 12.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: <TI1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 12.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] isab0: <PCI-ISA bridge> at device 14.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0x1000-0x100f,0-0x3,0-0x7,0-0x3,0-0x7 at device 14.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 14.2 (no driver attached) pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) sbc0: <ESS ES1879> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq 0,1 on isa0 pcm0: <ESS 18xx DSP> on sbc0 Timecounters tick every 4.000 msec GEOM: create disk ad0 dp=0xc18e9e60 ad0: 9590MB <FUJITSU MHN2100AT> [19485/16/63] at ata0-master PIO4 acd0: CDROM <CD-224E> at ata0-slave PIO4 Mounting root from ufs:/dev/ad0s1a ------------6zsJypidOR8j4HsVetIzET--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?oprzgjwn08bhn7s1>