Date: Thu, 04 Dec 2003 06:31:36 -0500 From: Chuck PUP Payne <payne@magidesign.com> To: <freebsd-questions@freebsd.org> Subject: Re: DynDNS Message-ID: <BBF48548.3FDE4%payne@magidesign.com> In-Reply-To: <20031203160647.03c67b5e.b_cassidy@bellsouth.net>
next in thread | previous in thread | raw e-mail | index | archive | help
To be honet I want to set up a DynDNS, we run our own DNS server and have a need for a DynDNS. I was wondering if there is a software package that I can download to set this up or is it build into Bind already. Thank for all the client information. Payne On 12/3/03 5:06 PM, "Bryan Cassidy" <b_cassidy@bellsouth.net> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Of course you need apache installed. It will print out on the screen after you > get done with a make install clean on ddclient but after you copy the > appropriate files just edit /usr/local/etc/ddclient.conf Here I have attached > my ddclient.conf file minus the usr name and passwd of course. > > HTH > > ###################################################################### > ## > ## Define default global variables with lines like: > ## var=value [, var=value]* > ## These values will be used for each following host unless overridden > ## with a local variable definition. > ## > ## Define local variables for one or more hosts with: > ## var=value [, var=value]* host.and.domain[,host2.and.domain...] > ## > ## Lines can be continued on the following line by ending the line > ## with a \ > ## > ###################################################################### > daemon=300 # check every 300 seconds > syslog=yes # log update msgs to syslog > mail=root # mail all msgs to root > mail-failure=root # mail failed update msgs to root > pid=/var/run/ddclient.pid # record PID in file. > # > #use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's > SOHO FW > #use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW > #use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade > FW > #use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's > internet FW > #use=linksys, fw=192.168.1.1:80 # via Linksys's > internet FW > #use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's > UGATE-3x00 FW > #use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom > DSL/10 DSL Router > #use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom > DSL/10 DSL Router > #use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom > DSL/10 DSL Router > #use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed > Touch Pro > #use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero > Router > #use=allnet-1298, fw=192.168.1.1:80 # via AllNet 1298 DSL > Router > #use=3com-oc-remote812, fw=192.168.0.254:80 # via 3com > OfficeConnect Remote 812 > #use=e-tech, fw=192.168.1.1:80 # via E-tech Router > #use=cayman-3220h, fw=192.168.0.1:1080 # via Cayman 3220-H > DSL Router > # > #fw-login=admin, fw-password=XXXXXX # FW login and > password > # > ## To obtain an IP address from FW status page (using fw-login, fw-password) > #use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP > Address > # > ## To obtain an IP address from Web status page (using the proxy if defined) > #use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP > Address > # > #use=ip, ip=127.0.0.1 # via static IP's > #use=if, if=eth0 # via interfaces > use=web # via web > # > #protocol=dyndns2 # default protocol > #proxy=fasthttp.sympatico.ca:80 # default proxy > #server=members.dyndns.org # default server > #server=members.dyndns.org:8245 # default server (bypassing > proxies) > > login=user name # default login > password=password for user # default > password > mx=your.domain.tld # default MX > #backupmx=yes|no # host is primary MX? > #wildcard=yes|no # add wildcard CNAME? > > ## > ## dyndns.org dynamic addresses > ## > ## (supports variables: wildcard,mx,backupmx) > ## > server=members.dyndns.org, \ > protocol=dyndns2 \ > your.domain.tld > > ## > ## dyndns.org static addresses > ## > ## (supports variables: wildcard,mx,backupmx) > ## > # static=yes, \ > # server=members.dyndns.org, \ > # protocol=dyndns2 \ > # your-static-host.dyndns.org > > ## > ## > ## dyndns.org custom addresses > ## > ## (supports variables: wildcard,mx,backupmx) > ## > # custom=yes, \ > # server=members.dyndns.org, \ > # protocol=dyndns2 \ > # your-domain.top-level,your-other-domain.top-level > > ## > ## ZoneEdit (zoneedit.com) > ## > # server=www.zoneedit.com, \ > # protocol=zoneedit1, \ > # login=your-zoneedit-login, \ > # password=your-zoneedit-password \ > # your.any.domain,your-2nd.any.dom > > ## > ## EasyDNS (easydns.com) > ## > # server=members.easydns.com, \ > # protocol=easydns, \ > # login=your-easydns-login, \ > # password=your-easydns-password \ > # your.any.domain,your-2nd.any.domain > > ## > ## Hammernode (hn.org) dynamic addresses > ## > # server=dup.hn.org, \ > # protocol=hammernode1, \ > # login=your-hn-login, \ > # password=your-hn-password \ > # your-hn-host.hn.org,your-2nd-hn-host.hn.org > > ## > ## dslreports.com dynamic-host monitoring > ## > # server=members.dslreports.com \ > # protocol=dslreports1, \ > # login=dslreports-login, \ > # password=dslreports-password \ > # dslreports-unique-id > > ## > ## OrgDNS.org account-configuration > ## > #use=web, web=members.orgdns.org/nic/ip > # server=www.orgdns.org \ > # protocol=dyndns2 \ > # login=yourLoginName \ > # password=yourPasswort \ > # yourSubdomain.orgdns.org > > ## > ## dnspark.com > ## (supports variables: mx, mxpri) > ## > # use=web, web=ipdetect.dnspark.com, web-skip='Current Address:' > # protocol=dnspark, \ > # server=www.dnspark.com, \ > # your-host.dnspark.com > > > > On Wed, 03 Dec 2003 12:49:18 -0500 > Payne <payne@magidesign.com> wrote: > >> Hi, I wanting to set up a DynDNS set what do I need for it work on FreeBSD? >> >> Payne >> >> >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.3 (FreeBSD) > > iD8DBQE/zl53m8uTTHnDH3ERArkOAJsGbUHnKE0iGbEMIp62dPtEgcWICACeKytW > 7z+2qWQ173l0yN6luiQXH/U= > =85G9 > -----END PGP SIGNATURE----- > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BBF48548.3FDE4%payne>