Date: Mon, 8 Dec 2003 10:04:18 -0800 From: Sam Leffler <sam@errno.com> To: Soren Schmidt <sos@spider.deepcore.dk> Cc: current@FreeBSD.ORG Subject: Re: Status of wi(4) Message-ID: <200312081004.18669.sam@errno.com> In-Reply-To: <200312081747.hB8Hlne5070093@spider.deepcore.dk> References: <200312081747.hB8Hlne5070093@spider.deepcore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 08 December 2003 09:47 am, Soren Schmidt wrote: > It seems Sam Leffler wrote: > > > wi0: <NETGEAR MA401 Wireless PC Card> at port 0x100-0x13f irq 11 > > > function 0 config 1 on pccard0 > > > wi0: 801.11 address: 00:30:ab:11:69:a5 > > > wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A > > > wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3) > > > wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > > > wi0: timeout in wi_cmd 0x0002; event status 0x0008 > > > wi0: timeout in wi_cmd 0x0000; event status 0x0008 > > > wi0: wi_cmd: busy bit won't clear. > > > wi0: init failed > > > wi0: failed to allocate 2372 bytes on NIC > > > wi0: tx buffer allocation failed (error 12) > > > wi0: interface not running > > > > My MA401 w/ later station firmware (1.3.4) works fine. The previous wi > > problems were with Lucent cards and appear to have been resolved. > > No! lucents even with the newest firmware 8.x.x still doesn't work in > either adhoc mode. I can get it to contact an AP but thats all.. My last testing of wi for Prism and Lucent both worked with adhoc mode. I am aware of your issues with adhoc mode for atwi cards. I will test again but, as usual, details are more useful than "it don't work". Sam
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200312081004.18669.sam>