Date: Wed, 10 Dec 2003 20:02:28 +0000 From: Benjamin Sobotta <mayday@gmx.net> To: Doug White <dwhite@gumbysoft.com> Cc: current@freebsd.org Subject: Re: strange network problems Message-ID: <200312102002.28961.mayday@gmx.net> In-Reply-To: <20031210101852.Y34418@carver.gumbysoft.com> References: <200312100257.30550.mayday@gmx.net> <20031210101852.Y34418@carver.gumbysoft.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_Uv31/fQu9JoUt+v
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
On Wednesday 10 December 2003 18:19, Doug White wrote:
> On Wed, 10 Dec 2003, Benjamin Sobotta wrote:
> > I attached dmesg with ACPI and without, also pciconf -lv. I hope that
> > helps.
> >
> > If you need any additional information, please let me know.
>
> boot -v output in both cases, please. Looks like the ACPI interrupt
> routing is doing the wrong thing on your system.
Okay, here are both files.
I also noted that if the system runs longer in ACPI mode the CPU fans start
running as if there was heavy load on the system. This is not the case. I
don't know if the two problems are connected, but it might be helpful...
-Ben
--Boundary-00=_Uv31/fQu9JoUt+v
Content-Type: text/plain;
charset="iso-8859-1";
name="dmesg_v_acpi.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg_v_acpi.txt"
slot 5 3 12 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 5 3 12 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 5 3 12 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 5 3 12 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 C 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 D 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 A 0x6b 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 B 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 D 0x6a 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 D 0x6a 3 4 5 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 3 B 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 3 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 3 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu2: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu3: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x8086, dev=0x2578, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2579, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x257b, revid=0x02
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000cc00, size 5, enabled
pcib0: matched entry for 0.29.INTA (source )
pcib0: device is hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 0000c000, size 5, enabled
pcib0: matched entry for 0.29.INTB (source )
pcib0: device is hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[20]: type 4, range 32, base 0000c400, size 5, enabled
pcib0: matched entry for 0.29.INTC (source )
pcib0: device is hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
map[20]: type 4, range 32, base 0000c800, size 5, enabled
pcib0: matched entry for 0.29.INTA (source )
pcib0: device is hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24de, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 1, range 32, base fa200000, size 10, enabled
pcib0: matched entry for 0.29.INTD (source )
pcib0: device is hardwired to IRQ 23
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00000500, size 5, enabled
pcib0: matched entry for 0.31.INTB (source )
pcib0: device is hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000d800, size 6, enabled
map[18]: type 1, range 32, base fa201000, size 9, enabled
map[1c]: type 1, range 32, base fa202000, size 8, enabled
pcib0: matched entry for 0.31.INTB (source )
pcib0: device is hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d5, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base f8000000, size 24, enabled
map[14]: type 3, range 32, base e0000000, size 28, enabled
pcib0: matched entry for 0.1.INTA (source )
pcib0: device is hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=0x10de, dev=0x0312, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xafff
pcib2: memory decode 0xfa000000-0xfa0fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base fa000000, size 17, enabled
map[18]: type 4, range 32, base 0000a000, size 5, enabled
found-> vendor=0x8086, dev=0x1019, revid=0x00
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0238, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xa000-0xa01f mem 0xfa000000-0xfa01ffff irq 5 at device 1.0 on pci2
pcib2: device em0 requested decoded memory range 0xfa000000-0xfa01ffff
pcib2: device em0 requested decoded I/O range 0xa000-0xa01f
em0: bpf attached
em0: Speed:N/A Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xb000-0xbfff
pcib3: memory decode 0xfa100000-0xfa1fffff
pcib3: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 1, range 32, base fa125000, size 11, enabled
map[14]: type 1, range 32, base fa120000, size 14, enabled
pcib3: matched entry for 3.3.INTA (source )
pcib3: device is hardwired to IRQ 20
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=3, slot=3, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=20
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000b000, size 6, enabled
map[14]: type 4, range 32, base 0000b400, size 4, enabled
map[18]: type 4, range 32, base 0000b800, size 7, enabled
map[1c]: type 1, range 32, base fa124000, size 12, enabled
map[20]: type 1, range 32, base fa100000, size 17, enabled
pcib3: matched entry for 3.4.INTA (source )
pcib3: device is hardwired to IRQ 23
found-> vendor=0x105a, dev=0x3373, revid=0x02
bus=3, slot=4, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=144 (dwords)
lattimer=0xf0 (7200 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=23
powerspec 2 supports D0 D1 D3 current D0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfa120000-0xfa123fff,0xfa125000-0xfa1257ff irq 20 at device 3.0 on pci3
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
pcib3: device fwohci0 requested decoded memory range 0xfa125000-0xfa1257ff
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:35:0b:9a
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:35:0b:9a
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
atapci0: <Promise PDC20378 SATA150 controller> port 0xb800-0xb87f,0xb400-0xb40f,0xb000-0xb03f mem 0xfa100000-0xfa11ffff,0xfa124000-0xfa124fff irq 23 at device 4.0 on pci3
pcib3: device atapci0 requested decoded memory range 0xfa124000-0xfa124fff
atapci0: [MPSAFE]
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: at 0xfa124000 on atapci0
ata2: [MPSAFE]
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: at 0xfa124000 on atapci0
ata3: [MPSAFE]
ata4: reset tp1 mask=01 ostat0=20 ostat1=30
ata4-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: reset tp2 mask=01 stat0=20 stat1=00 devices=0x0
ata4: at 0xfa124000 on atapci0
ata4: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xd800-0xd83f,0xd400-0xd4ff mem 0xfa202000-0xfa2020ff,0xfa201000-0xfa2011ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1985 AC97 Codec (id = 0x41445375)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, AMAP
pcm0: sndbuf_setmap 3a8000, 4000; 0xec0d8000 -> 3a8000
pcm0: sndbuf_setmap 3b5000, 4000; 0xec0dc000 -> 3b5000
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
sio0: irq maps: 0xa021 0xa031 0xa021 0xa021
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0xa021 0xa029 0xa021 0xa021
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
unknown: status reg test failed 0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd8000-0xd8fff,0xd0000-0xd7fff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2672742388 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
7c76c000 OUTL ST2 ALL ALL 12 00000000 7c76c080 8411:0008 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata1-master: setting PIO4 on Intel ICH5 chip
acd0: <ASUS DRW-0402P/D/1.05> DVDR drive at ata1 as master
acd0: read 5511KB/s (5511KB/s) write 2755KB/s (2755KB/s), 2000KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata2-master: setting PIO4 on Promise PDC20378 chip
ata2-master: setting UDMA133 on Promise PDC20378 chip
GEOM: create disk ad4 dp=0xc8522260
ad4: <Maxtor 6Y120M0/YAR51BW0> ATA-7 disk at ata2-master
ad4: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA133
ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata3-master: setting PIO4 on Promise PDC20378 chip
ata3-master: setting UDMA133 on Promise PDC20378 chip
GEOM: create disk ad6 dp=0xc8421e60
ad6: <Maxtor 6Y120M0/YAR51BW0> ATA-7 disk at ata3-master
ad6: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA133
lun 0
magic_0 0x00000000
magic_1 0x00000000
flags 0x1101 1101<PROMISE,READY,RAID0>
total_disks 2
generation 1
width 2
heads 255
sectors 63
cylinders 29893
total_sectors 480243200
interleave 256
reserved 63
offset 0
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4
sectors 240121665
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6
sectors 240121665
GEOM: create disk ar0 dp=0xc841ade0
ar0: 234493MB <ATA RAID0 array> [29893/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
pcm0: measured ac97 link rate at 47997 Hz, will use 48000 Hz
GEOM: new disk ad4
GEOM: new disk ad6
GEOM: new disk ar0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:122881122
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:122881185 l:357349860
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 62915134464 end 62915166719
GEOM: Configure ad4s2, start 62915166720 length 182963128320 end 245878295039
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:122881122
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:122881185 l:357349860
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar0s1, start 32256 length 62915134464 end 62915166719
GEOM: Configure ar0s2, start 62915166720 length 182963128320 end 245878295039
GEOM: Configure ar0s2a, start 0 length 209715200 end 209715199
GEOM: Configure ar0s2b, start 209715200 length 2147483648 end 2357198847
GEOM: Configure ar0s2c, start 0 length 182963128320 end 182963128319
GEOM: Configure ar0s2d, start 2357198848 length 2147483648 end 4504682495
GEOM: Configure ar0s2e, start 4504682496 length 16106127360 end 20610809855
GEOM: Configure ar0s2f, start 20610809856 length 26843545600 end 47454355455
GEOM: Configure ar0s2g, start 47454355456 length 536870912 end 47991226367
GEOM: Configure ar0s2h, start 47991226368 length 134971901952 end 182963128319
bus_explore done
sbp_post_explore (sbp_cold=2)
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x07000000 VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 3 (IRQ 3) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 5 (IRQ 5) to cluster 0
ioapic0: routing intpin 7 (IRQ 7) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 9 (IRQ 9) to cluster 0
ioapic0: routing intpin 12 (IRQ 12) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 17 (IRQ 17) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
ioapic0: routing intpin 19 (IRQ 19) to cluster 0
ioapic0: routing intpin 20 (IRQ 20) to cluster 0
ioapic0: routing intpin 23 (IRQ 23) to cluster 0
Mounting root from ufs:/dev/ar0s2a
start_init: trying /sbin/init
em0: Link is up 100 Mbps Full Duplex
em0: watchdog timeout -- resetting
em0: Link is up 100 Mbps Full Duplex
em0: watchdog timeout -- resetting
em0: Link is up 100 Mbps Full Duplex
em0: watchdog timeout -- resetting
em0: Link is up 100 Mbps Full Duplex
em0: watchdog timeout -- resetting
em0: Link is up 100 Mbps Full Duplex
Linux ELF exec handler installed
--Boundary-00=_Uv31/fQu9JoUt+v
Content-Type: text/plain;
charset="iso-8859-1";
name="dmesg_v_no_acpi.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg_v_no_acpi.txt"
dge
ioapic0: intpin 15 polarity: active-hi
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25788086)
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00fde60
PCI-Only Interrupts: 5 9 11
Location Bus Device Pin Link IRQs
slot 1 3 8 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 1 3 8 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 1 3 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 1 3 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 2 3 9 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 2 3 9 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 2 3 9 C 0x6b 3 4 5 7 9 10 11 12 14 15
slot 2 3 9 D 0x68 3 4 5 7 9 10 11 12 14 15
slot 3 3 10 A 0x6a 3 4 5 7 9 10 11 12 14 15
slot 3 3 10 B 0x6b 3 4 5 7 9 10 11 12 14 15
slot 3 3 10 C 0x68 3 4 5 7 9 10 11 12 14 15
slot 3 3 10 D 0x69 3 4 5 7 9 10 11 12 14 15
slot 4 3 11 A 0x6b 3 4 5 7 9 10 11 12 14 15
slot 4 3 11 B 0x68 3 4 5 7 9 10 11 12 14 15
slot 4 3 11 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 4 3 11 D 0x6a 3 4 5 7 9 10 11 12 14 15
slot 5 3 12 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 5 3 12 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 5 3 12 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 5 3 12 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 C 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 3 13 D 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 A 0x6b 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 B 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 D 0x6a 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 3 3 D 0x6a 3 4 5 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 3 B 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 3 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 3 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x8086, dev=0x2578, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2579, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x257b, revid=0x02
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000cc00, size 5, enabled
pcib0: slot 29 INTA routed to irq 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 0000c000, size 5, enabled
pcib0: slot 29 INTB routed to irq 19
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[20]: type 4, range 32, base 0000c400, size 5, enabled
pcib0: slot 29 INTC routed to irq 18
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
map[20]: type 4, range 32, base 0000c800, size 5, enabled
pcib0: slot 29 INTA routed to irq 16
found-> vendor=0x8086, dev=0x24de, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 1, range 32, base fa200000, size 10, enabled
pcib0: slot 29 INTD routed to irq 23
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00000500, size 5, enabled
pcib0: slot 31 INTB routed to irq 17
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000d800, size 6, enabled
map[18]: type 1, range 32, base fa201000, size 9, enabled
map[1c]: type 1, range 32, base fa202000, size 8, enabled
pcib0: slot 31 INTB routed to irq 17
found-> vendor=0x8086, dev=0x24d5, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 128M
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base f8000000, size 24, enabled
map[14]: type 3, range 32, base e0000000, size 28, enabled
pcib1: slot 0 INTA routed to irq 16
found-> vendor=0x10de, dev=0x0312, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 3.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xafff
pcib2: memory decode 0xfa000000-0xfa0fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base fa000000, size 17, enabled
map[18]: type 4, range 32, base 0000a000, size 5, enabled
pcib2: slot 1 INTA routed to irq 18
found-> vendor=0x8086, dev=0x1019, revid=0x00
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0238, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D3 current D0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xa000-0xa01f mem 0xfa000000-0xfa01ffff irq 18 at device 1.0 on pci2
pcib2: device em0 requested decoded memory range 0xfa000000-0xfa01ffff
pcib2: device em0 requested decoded I/O range 0xa000-0xa01f
em0: bpf attached
em0: Speed:N/A Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xb000-0xbfff
pcib3: memory decode 0xfa100000-0xfa1fffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 1, range 32, base fa125000, size 11, enabled
map[14]: type 1, range 32, base fa120000, size 14, enabled
pcib3: slot 3 INTA routed to irq 20
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=3, slot=3, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=20
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000b000, size 6, enabled
map[14]: type 4, range 32, base 0000b400, size 4, enabled
map[18]: type 4, range 32, base 0000b800, size 7, enabled
map[1c]: type 1, range 32, base fa124000, size 12, enabled
map[20]: type 1, range 32, base fa100000, size 17, enabled
pcib3: slot 4 INTA routed to irq 23
found-> vendor=0x105a, dev=0x3373, revid=0x02
bus=3, slot=4, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=144 (dwords)
lattimer=0xf0 (7200 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=23
powerspec 2 supports D0 D1 D3 current D0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfa120000-0xfa123fff,0xfa125000-0xfa1257ff irq 20 at device 3.0 on pci3
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
pcib3: device fwohci0 requested decoded memory range 0xfa125000-0xfa1257ff
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:35:0b:9a
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:35:0b:9a
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
atapci0: <Promise PDC20378 SATA150 controller> port 0xb800-0xb87f,0xb400-0xb40f,0xb000-0xb03f mem 0xfa100000-0xfa11ffff,0xfa124000-0xfa124fff irq 23 at device 4.0 on pci3
pcib3: device atapci0 requested decoded memory range 0xfa124000-0xfa124fff
atapci0: [MPSAFE]
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: at 0xfa124000 on atapci0
ata2: [MPSAFE]
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: at 0xfa124000 on atapci0
ata3: [MPSAFE]
ata4: reset tp1 mask=01 ostat0=20 ostat1=30
ata4-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: reset tp2 mask=01 stat0=20 stat1=00 devices=0x0
ata4: at 0xfa124000 on atapci0
ata4: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xd800-0xd83f,0xd400-0xd4ff mem 0xfa202000-0xfa2020ff,0xfa201000-0xfa2011ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1985 AC97 Codec (id = 0x41445375)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, AMAP
pcm0: sndbuf_setmap 301000, 4000; 0xec079000 -> 301000
pcm0: sndbuf_setmap 31d000, 4000; 0xec07d000 -> 31d000
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
unknown: status reg test failed 0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 17 devices, largest 92 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
pnpbios: handle 7 device ID INT0800 (0008d425)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xfffff, size=0xc000
PNP0c02: adding fixed memory32 range 0xe0400-0xe3fff, size=0x3c00
PNP0c02: adding fixed memory32 range 0xd0000-0xd3fff, size=0x4000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x400-0x4bf, size=0xc0, align=0
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 11 device ID PNP0f13 (130fd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: adding io range 0x778-0x77b, size=0x4, align=0
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x400
PNPb006: adding io range 0x330-0x331, size=0x2, align=0
pnpbios: handle 17 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
pnpbios: handle 18 device ID PNPb02f (2fb0d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd8000-0xd8fff,0xd0000-0xd7fff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0xa021 0xa031 0xa021 0xa021
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0xa021 0xa029 0xa021 0xa021
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xd0000-0xd3fff,0xe0400-0xe3fff,0xf4000-0xfffff,0xf0000-0xf3fff on isa0
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 10 on isa0
adv1: Invalid baseport of 0x201 specified. Nearest valid baseport is 0x210. Failing probe.
unknown: <PNPb02f> failed to probe at port 0x200,0x201-0x207 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2672737560 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
7c3a0000 OUTL ST2 ALL ALL 12 00000000 7c3a0080 8411:0008 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata1-master: setting PIO4 on Intel ICH5 chip
acd0: <ASUS DRW-0402P/D/1.05> DVDR drive at ata1 as master
acd0: read 5511KB/s (5511KB/s) write 2755KB/s (2755KB/s), 2000KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata2-master: setting PIO4 on Promise PDC20378 chip
ata2-master: setting UDMA133 on Promise PDC20378 chip
GEOM: create disk ad4 dp=0xc8759d60
ad4: <Maxtor 6Y120M0/YAR51BW0> ATA-7 disk at ata2-master
ad4: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA133
ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata3-master: setting PIO4 on Promise PDC20378 chip
ata3-master: setting UDMA133 on Promise PDC20378 chip
GEOM: create disk ad6 dp=0xc8759a60
ad6: <Maxtor 6Y120M0/YAR51BW0> ATA-7 disk at ata3-master
ad6: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA133
GEOM: new disk ad4
GEOM: new disk ad6
lun 0
magic_0 0x00000000
magic_1 0x00000000
flags 0x1101 1101<PROMISE,READY,RAID0>
total_disks 2
generation 1
width 2
heads 255
sectors 63
cylinders 29893
total_sectors 480243200
interleave 256
reserved 63
offset 0
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4
sectors 240121665
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6
sectors 240121665
GEOM: create disk ar0 dp=0xc83ec5e0
ar0: 234493MB <ATA RAID0 array> [29893/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
pcm0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:122881122
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:122881185 l:357349860
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 62915134464 end 62915166719
GEOM: Configure ad4s2, start 62915166720 length 182963128320 end 245878295039
GEOM: new disk ar0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:122881122
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:122881185 l:357349860
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar0s1, start 32256 length 62915134464 end 62915166719
GEOM: Configure ar0s2, start 62915166720 length 182963128320 end 245878295039
GEOM: Configure ar0s2a, start 0 length 209715200 end 209715199
GEOM: Configure ar0s2b, start 209715200 length 2147483648 end 2357198847
GEOM: Configure ar0s2c, start 0 length 182963128320 end 182963128319
GEOM: Configure ar0s2d, start 2357198848 length 2147483648 end 4504682495
GEOM: Configure ar0s2e, start 4504682496 length 16106127360 end 20610809855
GEOM: Configure ar0s2f, start 20610809856 length 26843545600 end 47454355455
GEOM: Configure ar0s2g, start 47454355456 length 536870912 end 47991226367
GEOM: Configure ar0s2h, start 47991226368 length 134971901952 end 182963128319
bus_explore done
sbp_post_explore (sbp_cold=2)
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 3 (IRQ 3) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 7 (IRQ 7) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 12 (IRQ 12) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 17 (IRQ 17) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
ioapic0: routing intpin 19 (IRQ 19) to cluster 0
ioapic0: routing intpin 20 (IRQ 20) to cluster 0
ioapic0: routing intpin 23 (IRQ 23) to cluster 0
Mounting root from ufs:/dev/ar0s2a
start_init: trying /sbin/init
em0: Link is up 100 Mbps Full Duplex
Linux ELF exec handler installed
--Boundary-00=_Uv31/fQu9JoUt+v--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200312102002.28961.mayday>