Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 13 Dec 2003 01:33:07 -0500
From:      slave-mike <slave-mike@slavepix.com>
To:        Nakata Maho <chat95@mbox.kyoto-inet.or.jp>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Cdrecord broken with 5.2Beta and ATAPICAM
Message-ID:  <3FDAB2A3.509@slavepix.com>
In-Reply-To: <20031213.003144.730550799.chat95@mbox.kyoto-inet.or.jp>
References:  <20031129140232.N16675@cvs.imp.ch> <20031213.003144.730550799.chat95@mbox.kyoto-inet.or.jp>

next in thread | previous in thread | raw e-mail | index | archive | help
Nakata Maho wrote:
> Hi, Martin
> 
> 
>>Since the ATAnG commit I'm no longer able to burn any
>>Cd's. 5.X, 5.1R did work.
> 
> Yes. me too.
> 
> 
>>Writing pregap for track 1 at -150
>>cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
>>write track pad data: error after 0 bytes
>>CDB:  2A 00 FF FF FF 6A 00 00 1F 00
>>BFree: 1568 K BSize: 1568 K
>>status: 0x2 (CHECK CONDITION)
> 
> ^^^^^^^^same error
> 
> 
>>Starting new track at sector: 0
>>Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>00 00 00 00 00 00 00 00 00 00
>>Sense Key: 0xFFFFFFFF [], Segment 0
>>Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
>>Sense flags: Blk 0 (not valid)
>>cmd finished after 1.675s timeout 200s
>>cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
>>CDB:  2A 00 00 00 00 00 00 00 1F 00
>>status: 0x2 (CHECK CONDITION)
>>Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>00 00 00 00 00 00 00 00 00 00
>>Sense Key: 0xFFFFFFFF [], Segment 0
>>Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
>>Sense flags: Blk 0 (not valid)
>>cmd finished after 0.192s timeout 200s
> 
> 
> My log is following:
> 
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Using libscg version 'schily-0.7'
> atapi: 0
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-106D'
> Revision       : '1.07'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
> cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : MMC-3 SWABAUDIO BURNFREE 
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1267712 = 1238 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data    41 MB         padsize:   30 KB
> Total size:       47 MB (04:42.44) = 21183 sectors
> Lout start:       47 MB (04:44/33) = 21183 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 4
>   Is not unrestricted
>   Is not erasable
>   Disk sub type: Medium Type B, low Beta category (B-) (4)
>   ATIP start of lead in:  -11746 (97:25/29)
>   ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Short strategy type (Phthalocyanine or similar)
> Manuf. index: 8
> Manufacturer: Hitachi Maxell, Ltd.
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 338666
> Starting to write CD/DVD at speed 8 in dummy SAO mode for single session.
> Last chance to quit, starting dummy write    0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is OFF.
> Sending CUE sheet...
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> Track 01:    0 of   41 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB:  2A 00 00 00 01 17 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid) 
> cmd finished after 0.000s timeout 200s
> 
> write track data: error after 571392 bytes
> Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00
> Writing  time:    5.260s
> Average write speed  55.5x.
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:   18.870s
> cdrecord: fifo had 73 puts and 10 gets.
> cdrecord: fifo was 0 times empty and 2 times full, min fill was 92%.
> 
> --maho
> 
> 
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
add -force flag and you can burn in spite of the ataNG problem with atapicam

-- 
http://slavepix.com/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FDAB2A3.509>