Date: Fri, 30 Jan 2004 17:52:19 +0100 From: Lerale Erwan <erwan@fr.clara.net> To: John Baldwin <jhb@FreeBSD.org> Cc: Lerale Erwan <erwan@fr.clara.net> Subject: Re: 4.9-p1 Twin CPUs not recognized Message-ID: <20040130165219.GA11385@livarot.noc.fr.clara.net> In-Reply-To: <200401301041.51029.jhb@FreeBSD.org> References: <20040130145116.GA471@livarot.noc.fr.clara.net> <200401301041.51029.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--zYM0uCDKw75PZbzx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Fri, Jan 30, 2004 at 10:41:51AM -0500, John Baldwin wrote:
>
> Do you have dmesg's from both motherboards?
dmesg's attached.
Thanks
r1
--
Manager Support Pro - www.claranet.fr
--zYM0uCDKw75PZbzx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="533.txt"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE-p1 #0: Fri Jan 16 08:24:28 CET 2004
yg@tmp.fr.clara.net:/usr/obj/usr/src/sys/TMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.60GHz (2592.36-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073676288 (1048512K bytes)
avail memory = 1039601664 (1015236K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 7, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 8, version: 0x00178020, at 0xfec82000
io2 (APIC): apic id: 9, version: 0x00178020, at 0xfec82400
Preloaded elf kernel "kernel" at 0xc0552000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc055209c.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f7b50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
IOAPIC #0 intpin 17 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2547)> at device 4.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
IOAPIC #2 intpin 0 -> irq 16
IOAPIC #2 intpin 1 -> irq 17
IOAPIC #2 intpin 6 -> irq 18
pci4: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xbc00-0xbc3f mem 0xfe500000-0xfe51ffff irq 16 at device 2.0 on pci4
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xb800-0xb83f mem 0xfe400000-0xfe41ffff irq 17 at device 2.1 on pci4
em1: Speed:N/A Duplex:N/A
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xb400-0xb43f mem 0xfe200000-0xfe21ffff,0xfe300000-0xfe300fff irq 18 at device 5.0 on pci4
fxp0: Ethernet address 00:02:b3:96:58:b4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
IOAPIC #1 intpin 2 -> irq 19
IOAPIC #1 intpin 3 -> irq 20
pci3: <PCI bus> on pcib3
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x9800-0x98ff,0x9c00-0x9cff mem 0xfdc00000-0xfdc01fff irq 19 at device 6.0 on pci3
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x9000-0x90ff,0x9400-0x94ff mem 0xfda00000-0xfda01fff irq 20 at device 6.1 on pci3
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xdc00-0xdc1f irq 2 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xd800-0xd81f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib4
pci1: <ATI Mach64-GR graphics accelerator> at 9.0 irq 10
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xff00-0xff0f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd2000-0xd37ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
SMP: AP CPU #1 Launched!
acd0: CDROM <SR244W> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass1 at ahd0 bus 0 target 8 lun 0
pass1: <SDR GEM318P 1> Fixed Processor SCSI-2 device
pass1: 3.300MB/s transfers
da0 at ahd0 bus 0 target 1 lun 0
da0: <SEAGATE ST336607LC 0006> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s1a
--zYM0uCDKw75PZbzx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="400.txt"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE-p1 #2: Wed Jan 14 15:37:36 CET 2004
claranet@abritel.co.fr.clara.net:/usr/obj/usr/src/sys/ABRITEL2
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.60GHz (2592.36-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2097088K bytes)
avail memory = 2086096896 (2037204K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 2, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 3, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 7, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 8, version: 0x00178020, at 0xfec82000
io2 (APIC): apic id: 9, version: 0x00178020, at 0xfec82400
Preloaded elf kernel "kernel" at 0xc0569000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f79d0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 9
IOAPIC #0 intpin 18 -> irq 10
IOAPIC #0 intpin 17 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2547)> at device 4.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
IOAPIC #2 intpin 0 -> irq 16
IOAPIC #2 intpin 1 -> irq 17
pci4: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xb800-0xb83f mem 0xefdc0000-0xefddffff irq 16 at device 2.0 on pci4
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0xbc00-0xbc3f mem 0xefde0000-0xefdfffff irq 17 at device 3.0 on pci4
em1: Speed:N/A Duplex:N/A
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
IOAPIC #1 intpin 0 -> irq 18
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 0xea000000-0xebffffff,0xec000000-0xecffffff,0xefc00000-0xefcfffff irq 18 at device 5.0 on pci3
asr0: major=154
asr0: ADAPTEC 2000S FW Rev. 380E, 2 channel, 256 CCBs, Protocol I2O
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xdc00-0xdc1f irq 2 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xd800-0xd81f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib4
pci1: <ATI Mach64-GR graphics accelerator> at 9.0 irq 10
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xff00-0xff0f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcf7ff,0xcf800-0xd0fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 10000 packets/entry by default
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
acd0: CDROM <SR244W> at ata0-master PIO4
Mounting root from ufs:/dev/da0s1a
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-5 380E> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 35074MB (71831552 512 byte sectors: 255H 63S/T 4471C)
--zYM0uCDKw75PZbzx--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040130165219.GA11385>