Date: Tue, 03 Feb 2004 14:17:59 -0500 From: Benjamin Slavin <bslavin_list@wavecrazy.net> To: avleeuwen@piwebs.com Cc: current@freebsd.org Subject: Re: Unable to boot any 5.x series kernel with SCSI enabled Message-ID: <401FF3E7.9080506@wavecrazy.net> In-Reply-To: <200402022229.16003.avleeuwen@piwebs.com> References: <401EB3B7.4090405@wavecrazy.net> <200402022229.16003.avleeuwen@piwebs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm rather embarrassed, but I must not have tried this on 5.2.1. I had tried it when I wanted to install 5.1, without success, but it worked for 5.2.1 I know that this system supports ACPI, as I've both checked the documentation as well as had used a Linux kernel with ACPI support (I've checked and my 4.9 kernel doesn't have acpi built-in. Is there any way to use ACPI at present, or are the changes that still need to be made to the code? --Ben Arjan van Leeuwen wrote: >On Monday 02 February 2004 21:31, Benjamin Slavin wrote: > > >>Hi everyone, >> >>This is my first time posting to the list, so please forgive any >>mistakes I might make. >> >>I'm currently running 4.9-STABLE without issue on a Dell Precision 420 >>Workstation. >>The system is dual processor (P3-733) and has an Adaptec SCSI controller >>onboard (aic7899), and 512MB of RDRAM. >> >>I was curious to take a look at the 5-series, so I threw in an older 9GB >>SCSI drive and tried to install 5.2-RELEASE. >> >>Upon inserting the CD, the system starts to come up, but crashes when >>trying to initialize the SCSI drives. I can say that this happens in >>5.1-RELEASE, 5.2-RELEASE, and 5.2.1-RC. If I try to boot in safe mode >>(or if I disable the SCSI controller in the BIOS), the system will come-up. >> >> >(...) > > > >>Waiting 15 seconds for SCSI devices to settle >>ahc1: Timedout SCB already complete, Interrupts may not be functioning. >>Infinite interrupt loop, INSTAT = 0(probe16:ahc1:0:1:0): SCB 0x8 - timed >>out ... >>[a dump of the card state has been omitted, but can be provided] >> >> > >Have you tried booting without ACPI? > >Best regards, > >Arjan > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?401FF3E7.9080506>