Date: Mon, 1 Mar 2004 19:16:17 -0600 From: Yevgen Muntyan <muntyan@tamu.edu> To: freebsd-current@freebsd.org Subject: Re: Can't assign irq for integrated wireless NIC Message-ID: <200403011916.17683.muntyan@tamu.edu> In-Reply-To: <200403011730.00767.jhb@FreeBSD.org> References: <200402291903.20499.muntyan@tamu.edu> <200403011730.00767.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 01 March 2004 16:30, John Baldwin wrote:
> Can you do 'sysctl debug.bootverbose=1' before kldload'ing ndis.ko and then
> send the messages here?
I'm sorry, but I don't really understand what messages. As I understand
debug.bootverbose makes logging on startup more verbose, so I don't
understand how does it relate to loading module. Or I need to load module
using loader.conf? Or you need dmesg? It was in my previous letter (and I put it
here).
Any way, I did "sysctl debug.bootverbose=1" and put "boot_verbose="yes" in
loader.conf, and loaded ndis and if_ndis modules both via loader.conf and after startup
using kldload, and result is always the same - panic with the same messages.
Do you need some info from debugger or something?
Yevgen
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Sun Feb 29 04:26:12 CST 2004
root@mlap.muntyan.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a9d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a9d26c.
Calibrating clock(s) ... i8254 clock: 1193202 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2658311910 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2658.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 469172224 (447 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001b761fff, 447975424 bytes (109369 pages)
avail memory = 449372160 (428 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6a80
bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd750+0x14b
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry = f0000:afea Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cbb21002)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 7 10
embedded 0 11 A 0x03 7 10
embedded 0 11 B 0x04 7 10
embedded 0 11 C 0x02 7 11
embedded 0 8 A 0x07 7 10
embedded 0 6 A 0x08 5
embedded 0 9 A 0x04 7 10
embedded 0 9 B 0x03 7 10
embedded 0 10 A 0x06 7 11
embedded 0 18 A 0x02 7 10
embedded 0 12 A 0x06 7 11
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 7, width = 5
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 7, width = 5
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 6, width = 4
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0
\\_SB_.PCI0.ISA_.LNK6 irq 0: [ 7 10] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK1 irq 10: [ 7 10] low,level,sharable 0.18.0
---- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNK6:
interrupts: 7 10
penalty: 1110 710
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNK6:
interrupts: 7 10
penalty: 1110 710
references: 1
priority: 910
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0
\\_SB_.PCI0.ISA_.LNK6 irq 10: [ 7 10] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK1 irq 10: [ 7 10] low,level,sharable 0.18.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d4000000, size 26, enabled
map[14]: type 3, range 32, base d0007000, size 12, enabled
found-> vendor=0x1002, dev=0xcbb2, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7010, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 1, range 32, base d0000000, size 12, memory disabled
pcib0: matched entry for 0.6.INTA (source \\_SB_.PCI0.ISA_.LNK7)
pcib0: slot 6 INTA is routed to irq 5
found-> vendor=0x10b9, dev=0x5451, revid=0x02
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base d0001000, size 12, memory disabled
map[14]: type 4, range 32, base 00001400, size 8, port disabled
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base d0002000, size 13, memory disabled
found-> vendor=0x14e4, dev=0x4320, revid=0x02
bus=0, slot=9, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0004000, size 12, memory disabled
pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNK5)
pcib0: slot 10 INTA is routed to irq 11
found-> vendor=0x1217, dev=0x6972, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00002000, size 5, enabled
pcib0: matched entry for 0.11.INTA (source \\_SB_.PCI0.ISA_.LNK2)
pcib0: slot 11 INTA is routed to irq 10
found-> vendor=0x1106, dev=0x3038, revid=0x50
bus=0, slot=11, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00002020, size 5, enabled
pcib0: matched entry for 0.11.INTB (source \\_SB_.PCI0.ISA_.LNK3)
pcib0: slot 11 INTB is routed to irq 10
found-> vendor=0x1106, dev=0x3038, revid=0x50
bus=0, slot=11, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0015, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base d0005000, size 8, memory disabled
found-> vendor=0x1106, dev=0x3104, revid=0x51
bus=0, slot=11, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0010, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base d0005800, size 11, memory disabled
map[14]: type 1, range 32, base d0008000, size 14, enabled
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0010, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00002040, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc4
bus=0, slot=16, func=0
class=01-01-fa, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 1, range 32, base d0006000, size 12, enabled
pcib0: matched entry for 0.18.INTA (source \\_SB_.PCI0.ISA_.LNK1)
pcib0: slot 18 INTA is routed to irq 10
found-> vendor=0x100b, dev=0x0020, revid=0x00
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x5a (2700 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xd0300000-0xd03fffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK0 irq 0: [ 7 10] low,level,sharable 1.5.0
---- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNK0:
interrupts: 7 10
penalty: 1220 920
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNK0:
interrupts: 7 10
penalty: 1220 920
references: 1
priority: 1070
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK0 irq 10: [ 7 10] low,level,sharable 1.5.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base d8000000, size 27, enabled
map[14]: type 4, range 32, base 00009000, size 8, enabled
map[18]: type 1, range 32, base d0300000, size 16, enabled
found-> vendor=0x1002, dev=0x4337, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
pci0: <network> at device 9.0 (no driver attached)
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> mem 0xd0004000-0xd0004fff irq 11 at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x69721217 0x04100007 0x06070000 0x00024000
0x10: 0xd0004000 0x020000a0 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b
0x40: 0x0850103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01881882
0x90: 0x00008002 0x00000000 0x00000000 0x00000000
0xa0: 0xfe020001 0x00c04100 0x00000000 0x00000011
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 10 at device 11.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 10 at device 11.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pci0: <serial bus, USB> at device 11.2 (no driver attached)
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd0008000-0xd000bfff,0xd0005800-0xd0005fff at device 12.0 on pci0
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNK2)
pcib0: slot 12 INTA is routed to irq 10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0d:9d:71:a0:47:ff:1c
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:9d:47:ff:1c
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=1)
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x2040-0x204f at device 16.0 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x2400-0x24ff mem 0xd0006000-0xd0006fff irq 10 at device 18.0 on pci0
sis0: Silicon Revision: DP83816A
sis0: Ethernet address: 00:0d:9d:46:b5:a2
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 3 us
acpi_ec0: info: new max delay is 10 us
acpi_ec0: info: new max delay is 30 us
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x401 0x409 0x401 0x401
sio0 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b
24 b3 00 6f 0d 0e 00 00 07 80 4a 80 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b
24 b3 00 6f 0d 0e 00 00 07 80 4a 80 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2658311910 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
1af0a000 OUTL ST2 ALL ALL 12 00000000 1af0a080 8411:0009 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_acad0: acline initialization start
acpi_ec0: info: new max delay is 370 us
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA100 on AcerLabs Aladdin chip
ad0: <IC25N080ATMR04-0/MO4OAD0A> ATA-6 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
bus_explore done
sbp_post_explore (sbp_cold=2)
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <SONY DVD+RW DW-P50A/1.8e> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 8192KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20482812
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20482875 l:20466810
[2] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/254/63 s:40949685 l:1992060
[3] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:42941745 l:113354640
GEOM: Configure ad0s1, start 32256 length 10487199744 end 10487231999
GEOM: Configure ad0s2, start 10487232000 length 10479006720 end 20966238719
GEOM: Configure ad0s3, start 20966238720 length 1019934720 end 21986173439
GEOM: Configure ad0s4, start 21986173440 length 58037575680 end 80023749119
GEOM: Configure ad0s2a, start 1073741824 length 9405264896 end 10479006719
GEOM: Configure ad0s2b, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s2c, start 0 length 10479006720 end 10479006719
MBREXT Slice 5 on ad0s4:
[0] f:00 typ:130 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:1991997
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:1992060 l:20000925
GEOM: Configure ad0s5, start 32256 length 1019902464 end 1019934719
MBREXT Slice 6 on ad0s4:
[0] f:00 typ:131 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:20000862
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:21992985 l:91361655
GEOM: Configure ad0s6, start 1019966976 length 10240441344 end 11260408319
MBREXT Slice 7 on ad0s4:
[0] f:00 typ:131 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:91361592
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s7, start 11260440576 length 46777135104 end 58037575679
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
acpi_ec0: info: new max delay is 11000 us
acpi_cmbat0: battery initialization failed, giving up
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200403011916.17683.muntyan>