Date: Tue, 22 Jun 2004 22:40:01 +0200 From: Bernd Walter <ticso@cicely12.cicely.de> To: Michael Kukat <michael@unixiron.org> Cc: freebsd-alpha@freebsd.org Subject: Re: SRM not initialising cards behind a bridge Message-ID: <20040622204000.GC21460@cicely12.cicely.de> In-Reply-To: <20040622212539.C3751@calchas.unixiron.org> References: <20040622200019.M3751@calchas.unixiron.org> <20040622211832.A50035@ns> <20040622212539.C3751@calchas.unixiron.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jun 22, 2004 at 09:28:13PM +0200, Michael Kukat wrote: > Hi ! > > On Tue, 22 Jun 2004, Jean-Francois Gobin wrote: > > By the way, in SRM, what does "SHOW PCI" and "SHOW ISA" reports ? > > Didn't check those commands, bit show conf shows all PCI stuff fine (cards, and > the 4 NICs behind the bridge), and the onboard ISA devices configured by isacfg > -init. There are no more ISA cards in it. Currently, the NIC is in my server, > which i'm writing these lines on, and which i don't want to take down again > currently. Maybe i'll put the card into my AlphaStation 200 the weekend to > track down the uaf problems. I think AS200 needs IRQ routing support done first. Let me know if you have IRQ problems - routing support is simple to implement if test hardware is available. -- B.Walter BWCT http://www.bwct.de bernd@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040622204000.GC21460>