Date: Thu, 2 Sep 2004 14:56:25 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: Peter Jeremy <PeterJeremy@optushome.com.au> Cc: alpha@freebsd.org Subject: Re: FreeBSD 5.3-BETA2 fails on ES45 Message-ID: <20040902125625.GA70852@freebie.xs4all.nl> In-Reply-To: <20040902073625.GS423@cirb503493.alcatel.com.au> References: <20040902073625.GS423@cirb503493.alcatel.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Sep 02, 2004 at 05:36:25PM +1000, Peter Jeremy wrote.. OK, well, works (or rather: does not work) as expected. > [I originally sent this from work but our DNS was stuffed so it wasn't > accepted by FreeBSD.org. Apologies if a second copy eventually appears] > > Probably not a surprise but I thought it would have gotten further > than it did: It starts loading the kernel, spinning happily for a > while and then just halts. I've tried three times (including a > power-on reset) with the same results (except the reported PC). I > expected it not to die until it tried to actually run the kernel. > > P00>>>b dqa0 > Initializing... > > OpenVMS PALcode V1.98-43, Tru64 UNIX PALcode V1.92-33 > > *** keyboard not plugged in... > starting console on CPU 0 > initialized idle PCB > initializing semaphores > initializing heap > initial heap 240c0 > memory low limit = 200000 heap = 240c0, 17fc0 > initializing driver structures > initializing idle process PID > initializing file system > initializing timer data structures > lowering IPL > CPU 0 speed is 1250 MHz > create dead_eater > create poll > create timer > create powerup > access NVRAM > 4096 MB of System Memory > Testing Memory > ... > probe I/O subsystem > Hose 0 - PCI bus running at 33Mhz > entering idle loop > Hose 1 - PCI bus running at 66Mhz > Hose 2 - AGP bus > Hose 3 - PCI bus running at 33Mhz > starting drivers > starting console on CPU 1 > initialized idle PCB > initializing idle process PID > lowering IPL > CPU 1 speed is 1250 MHz > create powerup > initializing GCT/FRU at 22e000 > Initializing pka pkb dqa dqb eia eib > Memory Testing and Configuration Status > Array Size Base Address Intlv Mode > --------- ---------- ---------------- ---------- > 0 2048Mb 0000000000000000 1-Way > 1 2048Mb 0000000080000000 1-Way > > 4096 MB of System Memory > Testing the System > Testing the Disks (read only) > Testing the Network > AlphaServer ES45 Console V6.5-20, built on Jun 5 2003 at 15:26:58 > > CPU 0 booting > > (boot dqa0.0.0.16.0 -flags A) > block 0 of dqa0.0.0.16.0 is a valid boot block > reading 409 blocks from dqa0.0.0.16.0 > bootstrap code read in > base = 6e8000, image_start = 0, image_bytes = 33200(209408) > initializing HWRPB at 2000 > initializing page table at ffff0000 > initializing machine state > setting affinity to the primary CPU > jumping to bootstrap code > Console: SRM firmware console > VMS PAL rev: 0x4002b00010162 > OSF PAL rev: 0x400210002015c > Switch to OSF PAL code succeeded. > > FreeBSD/alpha SRM CD9660 boot, Revision 1.2 > (root@ds10.wbnet, Mon Aug 30 03:48:07 UTC 2004) > Memory: 4194304 k > Loading /boot/defaults/loader.conf > /boot/kernel/kernel data=0x5b77f0+0x4d110 / > halted CPU 0 > > halt code = 2 > kernel stack not valid halt > PC = fffffc00008af428 > P00>>> > > -- > Peter Jeremy > _______________________________________________ > freebsd-alpha@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-alpha > To unsubscribe, send any mail to "freebsd-alpha-unsubscribe@freebsd.org" --- end of quoted text --- -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040902125625.GA70852>