Date: Fri, 14 Jan 2005 08:38:56 +0100 (CET) From: Michael Class <michaelc@tmbbobmc.bbn.hp.com> To: "Daniel O'Connor" <doconnor@gsoft.com.au> Cc: current@freebsd.org Subject: Re: SIL3112 and Maxtor 6Y160M0 SATA Disk: DMA Failure Message-ID: <Pine.LNX.4.61.0501140829050.5200@tmbbobmc.bbn.hp.com> In-Reply-To: <200501141112.00237.doconnor@gsoft.com.au> References: <41E568CE.9030905@gmx.de> <200501141112.00237.doconnor@gsoft.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 14 Jan 2005, Daniel O'Connor wrote: > On Thu, 13 Jan 2005 04:43, Michael Class wrote: >> Unfortunately when I do attach my Maxtor SATA disk to this controller >> I do only get DMA errors. This is all on a recent 6.0-CURRENT system >> and can be reproduced with a GENERIC kernel. >> Anything I could do to track this further down? > > I good start would be to post the stack trace of the crash.. Thank you for your answer! Sorry for not making myself clear enough. The system does not crash! So there are obviously no stack traces of crashes ... The attached disk (ad4) simply does not work, generating DMA errors that can be seen in the verbose bootlog that was attached to my first mail. The disk by itself seems to be o.k. as it is working on an other system running FBSD 6.0-current attached to a Promise SATA controller. The lines that are relevant to this in the bootlog seem to be: (but I attached the whole log to the original mail, so that someone who might be interessted can read more about the exact specification of the system used) ... atapci1: <SiI 3112 SATA150 controller> port 0xac00-0xac0f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07 mem 0xdffffc00-0xdffffdff irq 17 at device 13.0 on pci0 ... ad4: <Maxtor 6Y160M0/YAR51BW0> ATA-7 disk at ata2-master ad4: 156334MB (320173056 sectors), 317632 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, SATA150 ... GEOM: new disk ad4 ad4: TIMEOUT - READ_DMA retrying (2 retries left) LBA=0 ata2: reiniting channel .. .... ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: resetting done .. ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2: device config done .. ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0 ata2: reiniting channel .. ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: resetting done .. ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2: device config done .. ata2: reiniting channel .. ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: resetting done .. ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2: device config done .. ad4: FAILURE - READ_DMA timed out ad4: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0 Thank you Michael
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.61.0501140829050.5200>