Date: Fri, 18 Mar 2005 21:06:38 +0100 From: Palle Girgensohn <girgen@pingpong.net> To: freebsd-x11@freebsd.org Subject: Re: no DVI output after upgrading to xorg 6.8.2 Message-ID: <1ED143876F3E3CFFD19ABFA8@rambutan.pingpong.net> In-Reply-To: <200503181946.35384.dejan.lesjak@ijs.si> References: <44E0227E134FF92A7FAB68D2@fikon.pingpong.net> <200503181946.35384.dejan.lesjak@ijs.si>
next in thread | previous in thread | raw e-mail | index | archive | help
--On fredag, mars 18, 2005 19.46.34 +0100 Dejan Lesjak <dejan.lesjak@ijs.si> wrote: > On Friday 18 of March 2005 18:27, Palle Girgensohn wrote: >> Hi! >> >> After upgrading xorg to 6.8.2, my Radeon 9600 SE refuses to send any >> output on the DVI connector. Not even in BIOS during boot. VGA works >> fine. Before upgrading it worked just fine. >> >> Here's what Xorg.0.log says about it: >> >> (II) RADEON(0): Primary: >> Monitor -- CRT >> Connector -- VGA >> DAC Type -- Primary >> TMDS Type -- NONE >> DDC Type -- VGA_DDC >> (II) RADEON(0): Secondary: >> Monitor -- NONE >> Connector -- DVI-I >> DAC Type -- TVDAC/ExtDAC >> TMDS Type -- Internal >> DDC Type -- DVI_DDC >> (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; >> xclk=19900 >> (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode >> disabled >> >> >> I've shut down the system and tried all sorts of things. I went back to >> 6.8.1, but that didn't help (why should it, even in BIOS I don't get a >> signal). Is the card broken, or is it some "burnt in" config that >> happened? In the latter case, how can I fix it? >> >> I've enclosed the xorg log and config. > > Unfortunately it seems that this list doesn't like attachments, could you > put them somewhere and point to them. > I would suspect (given that downgrading to 6.8.1 doesn't help and > furthermore even video before you get to X not working) hardware > failure, but I might be wrong. You might want to ask at > xorg@lists.freedesktop.org as even if this is a problem with X.Org > server, it most probably would not be FreeBSD specific and there is a > better chance you might find someone that has the same hardware there. > > > Dejan OK, thanks for the input. I've nailed it down to the motherboard, actually, been switching screens, cords, graphic adapter, the motherboard fails. This must surely be hardware. I can configure X, using Option "MonitorLayout" "TMDS, NONE" so it will work through the DVI output, but BIOS and console are black :( (probing problem?) Luckily, there is be another month of warranty on the board, so I'll start there. Cheers, Palle
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1ED143876F3E3CFFD19ABFA8>