Date: Tue, 15 Nov 2005 08:59:52 +1100 From: Peter Clutton <peterclutton@gmail.com> To: Ruben de Groot <mail25@bzerk.org>, Peter Clutton <peterclutton@gmail.com>, Derek Tracy <tracyde@gmail.com>, freebsd-questions@freebsd.org Subject: Re: FreeBSD 6.0 on Sony Laptop Message-ID: <57416b300511141359m17db36e2x34a44a60786f6808@mail.gmail.com> In-Reply-To: <20051114161259.GA69914@ei.bzerk.org> References: <9999810b0511130559g1cb28d38ie3eeb561d8ccfe46@mail.gmail.com> <57416b300511131402o2a9cad97ic4cf3c1647808b3a@mail.gmail.com> <20051114161259.GA69914@ei.bzerk.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 11/15/05, Ruben de Groot <mail25@bzerk.org> wrote: > My quess from the > below snippet of dmesg is that there's something fishy about the second > controller (where the disk is attached) that is tolerated by 5.4's ata > driver, but not by 6.0's > > ad4: 76319MB <FUJITSU MHV2080BH/00000025> [155061/16/63] at ata2-master U= DMA33 Why is it connected to the secondary slave? It's also only achieving UDMA33. Unless it's an old laptop, that should be at least 66 or 100. Did you move the drive and change the cable? I would have guessed that putting it there behind your DVD would be enough to cause a couple of problems in itself. Although order and such doesn't matter too much, that will cause a slow down.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?57416b300511141359m17db36e2x34a44a60786f6808>