Date: Thu, 1 Dec 2005 16:45:36 +0100 From: Stevan Tiefert <stevan.tiefert@freenet.de> To: Fabian Keil <freebsd-listen@fabiankeil.de> Cc: freebsd-questions@freebsd.org Subject: Re: Problem with burning CD-DAs Message-ID: <200512011645.37174.stevan.tiefert@freenet.de> In-Reply-To: <20051201142504.5c73be17@T51.local> References: <4389E4A3.6090502@freenet.de> <438D60D3.4070508@freenet.de> <20051201142504.5c73be17@T51.local>
next in thread | previous in thread | raw e-mail | index | archive | help
Am Donnerstag, 1. Dezember 2005 14:25 schrieb Fabian Keil: > Stevan Tiefert <stevan.tiefert@freenet.de> wrote: > > Fabian Keil schrieb: > > > Stevan Tiefert <stevan.tiefert@freenet.de> wrote: > > >>Fabian Keil schrieb: > > >>>Stevan Tiefert <stevan.tiefert@freenet.de> wrote: > > >>>>I can rip without problems a CD-DA to a wav-file (cdda2wav). I > > >>>>played this file in a wav-player without problems. When I burn > > >>>>these wav-files with cdrecord to a CD-R and then play this CD-R > > >>>>on a CD-Player I hear the songs but with a disturbing rushing! No > > >>>>klicks! I hear the song with a rush like a storm! All > > >>>>Audio-Tracks, the whole CD, rushing! > > >>> > > >>>Did you check with readcd -c2scan if the burned disc is c2 error > > >>>free? > > >>> > > >>>If you rip the burned disc with cdda2wav -paranoia, do you get any > > >>>suspicious error messages? Do the ripped wavs still have the > > >>>problems you described? > > >> > > >>When I run: > > >>readcd dev=3D3,0,0 -c2scan > > >>it finish his work without hard read errors. > > > > > > It should finish without any errors. > > > > > >>With: > > >>cdda2wav -v255 -D3,0,0 -B -Owav -paranoia > > >>I got 60 % korrekt read *.wav-files the others have minor problems, > > >>rereads and so on... > > > > > > That is bad as well. > > > > > >>When I cdrecord the ONLY GOOD *.wav-files I got the same effect > > >>like before! I hear together with my songs a storm!!! It seems to > > >>be only the write process is not correct working! > > > > > > Please post the output of cdrecord dev=3D3,0,0 -atip, > > > and the last four lines of the c2scan. > > > > Second, the output of "cdrecord -atip dev=3D1,0,0": > > > > Cdrecord-Clone 2.01 (i386-unknown-freebsd5.4) Copyright (C) 1995-2004 > > J=F6rg Schilling > > scsidev: =B41,0,0=B4 > > scsibus: 1 target: 0 lun: 0 > > Using libscg version =B4schily-0.8=B4. > > Device type: Removable CD-ROM > > Version: 0 > > Response Format: 1 > > Vendor_info: =B4LG =B4 > > Identifikation: =B4CD-RW CED-8080B =B4 > > Revision: =B41.06=B4 > > [...] > > > Manufacturer: CMC Magnetics Corporation > > > > Third, the output of "readcd dev=3D1,0,0 -c2scan": > > > > Read speed: 5645 kB/s (CD 32x, DVD 4x). > > Write speed: 1411 kB/s (CD 8x, DVD 1x). > > Capacity: 198010 Blocks =3D 396020 kBytes =3D 386 MBytes =3D 405 prMB > > Sectorsize: 2048 Bytes > > Copy from SCSI (1,0,0) disk to file =B4/dev/null=B4 > > end: 198010 > > addr: 198010 cnt: 10 > > Time total: 225.993sec > > Read 511654.75 kB at 2264.0 kB/sec. > > Total of 0 hard read errors. > > C2 errors total: 0 bytes in 0 sectors on disk > > C2 errors rate: 0.000000% > > C2 errors on worst sector: 0, sectors with 100+ C2 errors: 0 > > If you try cdda2wav -B dev=3D1,0,0 -paranoia, do you get > as bad results as with 3,0,0? > > What is the result of readcd dev=3D3,0,0 -c2scan? > > Fabian When I used dev=3D3,0,0 the CD-RW was connected on a PCI-EIDE-Host-Adapter.= I=20 thought that the chipset of my mainboard don't support any correct writing = of=20 CD-DAs. But the EIDE-Controller of the mainboard and the Host-Adapter do ha= ve=20 both the same results... dev=3D1,0,0 is the same CD-RW connected on the=20 mainboard. With regards Stevan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200512011645.37174.stevan.tiefert>