Date: Fri, 01 Sep 2006 09:17:20 -0700 From: Julian Elischer <julian@elischer.org> To: ASHA GOWDA <gowda_asha2k@yahoo.com> Cc: freebsd-net@freebsd.org Subject: Re: Info required for MLFR testing Message-ID: <44F85D10.9030009@elischer.org> In-Reply-To: <20060831095113.50121.qmail@web33404.mail.mud.yahoo.com> References: <20060831095113.50121.qmail@web33404.mail.mud.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
ASHA GOWDA wrote: >Hi , > >For testing MLFR application in the MLFR to FR >direction, we are sending IP over PPP Packet through >Adtech Multi Layer ports. >We need to make some changes in the PPP Header to be >used for MLFR Traffic. > > does mlfr require ppp? why not just use mlppp? >Can we know the changes to be made for the same(like >PID to be used nad seq no....)? >Our test setup is like this : > >Our Target Machine was connected on one side to Adtech >OC -12 Port and the other side was connected to Multi >Layer OC-12 Port. > > > You should probably write a netgraph-capable driver for the card, as teh frame relay drivers etc are all netgraph and it will probably make it easier for you if you do this. >Multi Layer Port of Adtech was used for MLFR side(MLFR >to FR side) and general OC-12 Port of Adtech was used >FR side(FR to MLFR side) > > you don't say what release of FreeBSD you are doing this on... (or even if it IS freeBSD you are using) >Thanks in advance!!!!! >Asha. > >__________________________________________________ >Do You Yahoo!? >Tired of spam? Yahoo! Mail has the best spam protection around >http://mail.yahoo.com >_______________________________________________ >freebsd-net@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-net >To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44F85D10.9030009>