Date: Tue, 14 Nov 2006 16:09:13 -0500 From: "Raymond T. Sundland" <raymond@sundland.com> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-amd64@freebsd.org Subject: Re: FW: IPMI kernel module errors on 6.x Message-ID: <455A3079.6010800@sundland.com> In-Reply-To: <200611141252.00756.jhb@freebsd.org> References: <003301c70754$56143280$8478020a@medco.com> <200611131552.14987.jhb@freebsd.org> <45592F08.40205@sundland.com> <200611141252.00756.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi John, I don't see any of the additional messages that should be output by KCS_DEBUG. I see the code (ifdef's) everywhere, but I don't actually see the output. is this something that should be in dmesg or elsewhere? I even removed the ifdef's to see if the output would be displayed in the dmesg without the check, and I see nothing. I also tried loading the module with kldload -v. John Baldwin wrote: > On Monday 13 November 2006 21:50, Raymond T. Sundland wrote: > >> This is the output with KCS_DEBUG enabled: >> >> ipmi0: <IPMI System Interface> on isa0 >> ipmi0: KCS mode found at mem 0xca2 alignment 0x4 on isa >> ipmi0: KCS: initial state: 00 >> ipmi0: KCS: Failed to start write >> ipmi0: KCS Error retry exhausted >> ipmi0: KCS: Failed to start write >> ipmi0: KCS Error retry exhausted >> ipmi0: KCS: Failed to start write >> ipmi0: KCS Error retry exhausted >> ipmi0: Timed out waiting for GET_DEVICE_ID >> > > Hmmm. It appears to not be working at all. You can add more printf's in > kcs_start_write() and kcs_error() to see exactly which conditions are > failing. If the status byte was just always stuck as 0x00 kcs_error() should > succeed, so it is doing something. > > >> John Baldwin wrote: >> >>> On Monday 13 November 2006 13:48, Raymond Sundland wrote: >>> >>> >>>> I sent this to -questions earlier, but thought I would get a more >>>> > complete > >>>> response from either -hackers or -amd64. >>>> >>>> >>> Try enabling KCS_DEBUG in sys/dev/ipmi/ipmi_kcs.c and save the output to a >>> file (it will be a lot!). >>> >>> >>> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?455A3079.6010800>