Date: Thu, 23 Nov 2006 17:31:56 -0800 From: David Sharp <daimon@dev-random.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-arm@freebsd.org Subject: Re: Question about "make trampoline" on FreeBSD Message-ID: <20061124013156.GI2324@mail.secure.net> In-Reply-To: <20061123.175756.-1398301896.imp@bsdimp.com> References: <b2ec5cad0611230629r5db3ac81k565068449d13b090@mail.gmail.com> <20061124002310.GA2324@mail.secure.net> <20061123.175756.-1398301896.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2006.11.23 17:57:56 +0000, M. Warner Losh wrote: > SD root isn't that slow. I get from power on to login prompt in 1 > minute on the machines at work as well as the KB9202 boards. Over NFS > root it takes about the same amount of time. Maybe there's something > weird in your setup... NFS is quite a bit faster than SD for me, so as you suggest my hw is prolly broken. i think i got all the pullups in the right place. it has not failed to load but is just slow to read/write. perhaps another sd card might fix things. are the ...bus width to 1 messages normal? Timecounter "AT91RM9200 timer" frequency 32768 Hz quality 1000 Timecounters tick every 7.812 msec at91_mci0: Setting controller bus width to 1 at91_mci0: Setting controller bus width to 1 at91_mci0: Setting controller bus width to 1 at91_mci0: Setting controller bus width to 1 at91_mci0: Setting controller bus width to 1 at91_mci0: Setting controller bus width to 1 SD CARD: 500695040 bytes at91_mci0: Setting controller bus width to 1 mmcsd0: <mmc or sd flash card> on mmc0 mmc0: setting transfer rate to 30.000MHz at91_mci0: Setting controller bus width to 1 Trying to mount root from ufs:mmcsd0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061124013156.GI2324>