Date: Tue, 02 Jan 2007 11:40:35 -0500 From: Nathan Vidican <nathan@vidican.com> To: Sergio <sergio.iaei@hotmail.com>, amd64@freebsd.org Subject: Re: amd64/107433: i can't install FreeBSD Release 6.1 on HP Pavillion dv8000 laptop with amd64 turion Message-ID: <459A8B03.7010209@vidican.com> In-Reply-To: <200701021530.l02FUs4b083032@www.freebsd.org> References: <200701021530.l02FUs4b083032@www.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Sergio wrote: >> Number: 107433 >> Category: amd64 >> Synopsis: i can't install FreeBSD Release 6.1 on HP Pavillion dv8000 laptop with amd64 turion >> Confidential: no >> Severity: critical >> Priority: low >> Responsible: freebsd-amd64 >> State: open >> Quarter: >> Keywords: >> Date-Required: >> Class: sw-bug >> Submitter-Id: current-users >> Arrival-Date: Tue Jan 02 15:40:17 GMT 2007 >> Closed-Date: >> Last-Modified: >> Originator: Sergio >> Release: 6.1 >> Organization: >> > IFM > >> Environment: >> > no se puede ejecutar uname ya que el sistema no arranca > >> Description: >> > cuando intento instalar FreeBSD Release 1 en mi amd turion 64 el proceso se interrumpe practicamente al inicio, empiezan a aparecer en pantalla en forma de cascada los contenidos de los registros eax, etc... una y otra vez, tan rápidamente que no se puede ni leer su contenido. > >> How-To-Repeat: >> > Reiniciando la computadora y bootando desde el cdrom vuelve a pasar lo msimo > >> Fix: >> > > >> Release-Note: >> Audit-Trail: >> Unformatted: >> > _______________________________________________ > freebsd-amd64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 > To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org" > > > This message sent from an HP dv8000 AMD Turion64 laptop installed with 6.1-RELEASE, more recently upgraded to 6.2-RC1 ... knock-on-wood, no problems thus far. It does install fine for me without any issues asside from hardware support (ie wireless lan issues). This particular laptop has to 17inch screen, two hardrives (the 100gb that came with, and a second 20gb that boots the FreeBSD O/S), and 1024MB ram. I have some custom patches installed to the ndis wrapper kernel module in order to use the 64bit windows drivers for wireless lan, but otherwise fairly stock install; dmesg output is as follows: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RC1 #0: Fri Nov 17 10:46:22 EST 2006 root@nv-laptop.wmptl.net:/usr/src/sys/amd64/compile/nv1 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 Mobile Technology ML-34 (1790.84-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 1072300032 (1022 MB) avail memory = 1025146880 (977 MB) ACPI APIC Table: <PTLTD APIC > MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1a> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci6: <ACPI PCI bus> on pcib3 ndis0: <Broadcom 802.11a/b/g WLAN> mem 0xc0204000-0xc0205fff irq 21 at device 2.0 on pci6 ndis0: NDIS API version: 5.1 fpudna in kernel mode! ndis0: Ethernet address: 00:14:a5:7f:e9:ce cbb0: <PCI-CardBus Bridge> mem 0xc0208000-0xc0208fff irq 20 at device 4.0 on pci6 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xc0209000-0xc02097ff,0xc0200000-0xc0203fff irq 23 at device 4.2 on pci6 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 63:3f:02:00:5d:1e:41:7a fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fwohci0: phy int pci6: <mass storage> at device 4.3 (no driver attached) pci6: <base peripheral> at device 4.4 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc020a400-0xc020a4ff irq 22 at device 6.0 on pci6 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:16:d4:00:4d:82 pcm0: <ATI IXP 400> mem 0xc0003400-0xc00034ff irq 17 at device 20.5 on pci0 pci0: <simple comms, generic modem> at device 20.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd5fff,0xd7800-0xd7fff,0xd8000-0xd8fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: Broadcom Corp HP Integrated Module, rev 2.00/1.00, addr 2 Timecounter "TSC" frequency 1790842573 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled ad0: 95396MB <FUJITSU MHV2100AT PL 008300A1> at ata0-master UDMA100 ad1: 19077MB <HITACHI DK23DA-20 00J2A0A3> at ata0-slave UDMA100 acd0: DVDR <HL-DT-ST DVDRAM GSA-4084N/KQ09> at ata1-master PIO4 pcm0: <Conexant CX20468-21 AC97 Codec> cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-4084N KQ09> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad1s2a Hope it helps - but you should be able to install on this machine without any problems - I did. -- Nathan Vidican nvidican@wmptl.com Windsor Match Plate & Tool Ltd. http://www.wmptl.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?459A8B03.7010209>