Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 12 Jan 2007 15:03:10 -0800
From:      "Bruce A. Mah" <bmah@freebsd.org>
To:        Peter Jeremy <peterjeremy@optushome.com.au>, stable@freebsd.org
Subject:   Re: Source MAC addresses when bridge(4) used
Message-ID:  <45A813AE.5090104@freebsd.org>
In-Reply-To: <20070112221152.GA54760@icarus.home.lan>
References:  <20070106210211.GF839@turion.vk2pj.dyndns.org> <20070112221152.GA54760@icarus.home.lan>

next in thread | previous in thread | raw e-mail | index | archive | help
This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enig97323F2BC565B6798A77EC84
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

If memory serves me right, Jeremy Chadwick wrote:
> On Sun, Jan 07, 2007 at 08:02:11AM +1100, Peter Jeremy wrote:
>> The desktop network configuration is:
>> tl0: flags=3D8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu =
1500
>>         ether 00:00:24:28:98:9a
>>         media: Ethernet autoselect (100baseTX <full-duplex>)
>>         status: active
>> rl0: flags=3D8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu =
1500
>>         options=3D8<VLAN_MTU>
>>         inet 192.168.123.36 netmask 0xffffff00 broadcast 192.168.123.2=
55
>>         ether 00:20:ed:78:9c:a3
>>         media: Ethernet autoselect (100baseTX <full-duplex>)
>>         status: active
>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>>         inet 127.0.0.1 netmask 0xff000000=20
>> bridge0: flags=3D8043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>>         ether ca:a9:aa:1e:71:32
>>         priority 32768 hellotime 2 fwddelay 15 maxage 20
>>         member: tl0 flags=3D3<LEARNING,DISCOVER>
>>         member: rl0 flags=3D3<LEARNING,DISCOVER>
>=20
> Does tinkering with net.link.ether.bridge.config help at all?  See
> bridge(4) manpage.  (I haven't used this, I'm just brainstorming...)

Actually the applicable manpage for this configuration is if_bridge(4),
but I think the OP knew that.  As someone else in this thread pointed
out, the usual practice is to assign an IP address to the bridge0
interface and leave the member interfaces unnumbered.

As for *why* the IP address keeps moving around, I'm not sure either.

Bruce.



--------------enig97323F2BC565B6798A77EC84
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFFqBOu2MoxcVugUsMRArUHAKCRZlExCmUzhhx2HTLx7a9gGF6lwwCfbpNE
ns9dmMP9wlgDN61dWqNtNi0=
=3/xs
-----END PGP SIGNATURE-----

--------------enig97323F2BC565B6798A77EC84--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45A813AE.5090104>