Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 8 May 2007 22:55:31 +0200
From:      Harald Schmalzbauer <h.schmalzbauer@omnisec.de>
To:        freebsd-current@freebsd.org
Cc:        Hans Petter Selasky <hselasky@c2i.net>
Subject:   Re: [new usb4bsd stack] Feedback ...
Message-ID:  <200705082255.32015.h.schmalzbauer@omnisec.de>
In-Reply-To: <200705021848.47920.hselasky@c2i.net>
References:  <20070502083356.GB1787@obelix.dsto.defence.gov.au> <200705021848.47920.hselasky@c2i.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Am Mittwoch, 2. Mai 2007 schrieb Hans Petter Selasky:
> On Wednesday 02 May 2007 10:33, Wilkinson, Alex wrote:
> > All looks good so far:
> >
> > FreeBSD 7.0-CURRENT #2: Wed May  2 09:28:13 WST 2007
> >
> > 1st device successfully attached:
> >
> >    umass0: <PIONEER CORPORATION PIONEER DVD/CD Writer DVR-S606, class
> > 0/0, rev 2.00 /0.01, addr 126> umass0:  SCSI over Bulk-Only; quirks =
> > 0x0000 umass0:0:0:-1: Attached to scbus0
> >    cd0 at umass-sim0 bus 0 target 0 lun 0
> >    cd0: <PIONEER DVD-RW  DVR-106D 1.08> Removable CD-ROM SCSI-0 device
> >    cd0: 40.000MB/s transfers
> >    cd0: cd present [252723 x 2048 byte records]
> >    GEOM_LABEL: Label for provider cd0 is iso9660/HPSMST740.

I'm not so lucky, my Sony Memory Stick Controller doesn't work:
umass0: <Sony USB Memory Stick Slot, class 0/0, rev 1.10/1.01, addr 126>
umass0:  8070i (ATAPI) over CBI with CCI; quirks = 0x0000
umass0: could not setup required transfers, USBD_NO_CALLBACK
device_attach: umass0 attach returned 6
usbd_fill_iface_data: invalid wMaxPacketSize=0x0000, addr=125!
usbd_fill_iface_data: invalid wMaxPacketSize=0x0000, addr=125!
usbd_fill_iface_data: invalid wMaxPacketSize=0x0000, addr=125!
usbd_fill_iface_data: invalid wMaxPacketSize=0x0000, addr=125!

7.0-current from today, i815 (ich2) uhci.

Another card reader is working fine, also my rs232 cable (uplcom) attaches 
correctly.

One problem is that configuring DFLT_UKBD_KEYMAP in the kernel config breakes 
the build.

Best regards,

-Harry



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705082255.32015.h.schmalzbauer>