Date: Fri, 17 Aug 2007 01:52:39 +0800 From: Khairil Yusof <kaeru@inigo-tech.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: usb/105186: USB 2.0/ehci on FreeBSD 6.2-PRE/AMD64 crashes box Message-ID: <1187286759.52029.10.camel@localhost> In-Reply-To: <200708161820.46432.hselasky@c2i.net> References: <200708140300.l7E30EAf011416@freefall.freebsd.org> <200708141701.25433.hselasky@c2i.net> <1187273275.52029.5.camel@localhost> <200708161820.46432.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 2007-08-16 at 18:20 +0200, Hans Petter Selasky wrote:
> It looks like the block size is 512 bytes.
>
> Could you send the complete dmesg until the error happens ?
The errors then repeat continuously.
dmesg.boot:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p7 #12: Thu Aug 16 14:31:56 MYT 2007
kaeru@gambit.inigo-tech.com:/tmp/obj/usr/src/sys/GAMBIT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (999.72-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 1040121856 (991 MB)
avail memory = 992014336 (946 MB)
ACPI APIC Table: <AWARD AWRDACPI>
ioapic0 <Version 1.4> irqs 0-23 on motherboard
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff,0x480-0x48f,0x1000-0x10df,0x10e0-0x10ff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 760 host to AGP bridge> mem 0xe8000000-0xe9ffffff at device
0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <SiS 5571 USB controller> mem 0xea124000-0xea124fff irq 20 at
device 3.0 on pci0
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
ohci1: <SiS 5571 USB controller> mem 0xea120000-0xea120fff irq 21 at
device 3.1 on pci0
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
ohci2: <SiS 5571 USB controller> mem 0xea121000-0xea121fff irq 22 at
device 3.2 on pci0
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
pci0: <serial bus, USB> at device 3.3 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0xe000-0xe0ff mem
0xea123000-0xea123fff irq 19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:01:6c:a2:0b:3b
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq
3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 999721151 Hz quality 800
Timecounters tick every 1.000 msec
usb0: 12MBps Full Speed USB v1.0
uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 127>
uhub0: 3 ports with 3 removable, self powered
usb1: 12MBps Full Speed USB v1.0
uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 127>
uhub1: 3 ports with 3 removable, self powered
atausb0: <Seagate FreeAgentDesktop, class 0/0, rev 2.00/0.00, addr 126>
atausb0: using SCSI over Bulk-Only
ata2: <USB lun 0> on atausb0
usb2: 12MBps Full Speed USB v1.0
uhub2: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 127>
uhub2: 2 ports with 2 removable, self powered
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
enabled, default to deny, logging limited to 100 packets/entry by
default
ad0: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100
GEOM_MIRROR: Device gm0 created (id=260458111).
GEOM_MIRROR: Device gm0: provider ad0 detected.
ad1: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-slave UDMA100
GEOM_MIRROR: Device gm0: provider ad1 detected.
GEOM_MIRROR: Device gm0: provider ad1 activated.
GEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
acd0: CDRW <SONY CD-RW CRX320EE/RYK3> at ata1-master UDMA33
unknown: begin_transaction ATAPI_IDENTIFY
atausb0: BBB transfer 4
atausb0: atausb_t_bbb_data_read_callback: max_bulk=131072,
ata_bytecount=255
atausb0: atausb_t_bbb_data_read_callback: max_bulk=131072,
ata_bytecount=0
atausb0: BBB transfer 8
atausb0: atausb_t_bbb_status_callback: depreciated unlock!
unknown: end_transaction INQUIRY
afd0: begin_transaction TEST_UNIT_READY
atausb0: BBB transfer 8
atausb0: atausb_t_bbb_status_callback: depreciated unlock!
afd0: end_transaction TEST_UNIT_READY
<snip>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1187286759.52029.10.camel>