Date: Sun, 2 Sep 2007 13:59:24 +0200 From: Martin Schweizer <lists_freebsd@bluewin.ch> To: Kris Kennaway <kris@freebsd.org> Cc: freebsd-questions@freebsd.org, Kris Kennaway <kris@obsecurity.org> Subject: Re: ldconfig problem after upgrade 4.11 to 5.5 Message-ID: <20070902115924.GA38350@saturn.pcs.ms> In-Reply-To: <20070827153454.GB70070@hub.freebsd.org> References: <20070822042246.GA3497@saturn.pcs.ms> <20070822043725.GA2869@rot26.obsecurity.org> <20070822045118.GB3497@saturn.pcs.ms> <20070822063102.GA4141@rot26.obsecurity.org> <20070822064430.GB3852@saturn.pcs.ms> <20070822132050.GA9055@rot26.obsecurity.org> <20070826153546.GA637@saturn.pcs.ms> <20070827153454.GB70070@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--AqsLC8rIMeq19msA Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello Kris Am Mon, Aug 27, 2007 at 03:34:54PM +0000 Kris Kennaway schrieb: > > > > > > > > After I updated my 4.11 to an 5.5 system (following /usr/sr= c/UPDATING), I get=20 > > > > > > > > around 63 error messages while the system boot up: > > > > > > > >=20 > > > > > > > > ldconfig: /var/run/ld.so.hints: No such file or directory > > > > > > > > search: trailing characters ignored > > > > > > > > No such file or directory > > > > > > > > 0: - lmalloc.1.1: trailing characters ignored. No s= uch file or=20 > > > > > > > > directory > > > > > > > > ... > > > > > > > > ... > > > > > > > >=20 > > > > > > > Looks like it might be a broken symlink. > > > > > > >=20 > > > > > > > Why are you updating to 5.5 though? You should be using 6.2. > > > > > >=20 > > > > > > If I'm understanding /usr/src/UPDATING correct I should first u= pdate to 5.5=20 > > > > > > and then to 6.2? > > > > >=20 > > > > > OK. It may have been easier (and still could be) to just do a bi= nary > > > > > upgrade instead. > > > > >=20 > > > > > > Any ideas where I can check this symlink? > > > > >=20 > > > > > Use find(1) to look for libmalloc.so.1.1 > > > >=20 > > > > The files are all located in /usr/lib/compat/aout. The path is defi= ned in=20 > > > > /etc/defaults/rc.conf > > > > [snip] > > > > ldconfig_paths_aout=3D"/usr/lib/compat/aout /usr/X11R6/lib/aout /us= r/local/lib/aout" > > > > [snip] > > > >=20 > > > > Any ideas? > > >=20 > > > Are you missing aout support from your kernel? I think it's COMPAT_A= OUT. > >=20 > > After reading about ldconfig and playing with the parameters (see man p= age) I=20 > > find out that the processing of the pathes in /etc/defaults/rc.conf isn= 't=20 > > correct. > > /etc/defaults/rc.conf: > > [snip] > > ldconfig_insecure=3D"NO" # Set to YES to disable ldconfig security chec= ks > > ldconfig_paths=3D"/usr/lib/compat /usr/X11R6/lib /usr/local/lib" > > ldconfig_paths_aout=3D"/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/lo= cal/lib/aout" > > ldconfig_local_dirs=3D"/usr/local/libdata/ldconfig /usr/X11R6/libdata/l= dconfig" > > # Local directories with ldconfig configuration files. > > ldconfig_local32_dirs=3D"/usr/local/libdata/ldconfig32 /usr/X11R6/libda= ta/ldconfig32" > > # Local directories with 32-bit compatibility ldconfig > > [snip] > >=20 > > Following this I set in /etc/rc.conf > >=20 > > [snip] > > ldconfig_paths_aout=3D"/usr/lib/compat/aout" > > [snip] > >=20 > > Any ideas why the kernel do not process the pathes correct? > >=20 > > Now it works. Thank you for your help. > >=20 >=20 > You need a.out support *IN YOUR KERNEL*. i.e. you need to enable it > in your kernel configuration and recompile your kernel. Only for clarification. This option I've in my kernel: [snip] options COMPAT_AOUT [snip] After the above change in /etc/rc.conf no messages occurs while FreeBSD is= =20 starting. --=20 Regards, Martin Schweizer <info@pc-service.ch> PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch; public key : http://www.pc-service.ch/pgp/public_key.asc;=20 fingerprint: EC21 CA4D 5C78 BC2D 73B7 10F9 C1AE 1691 D30F D239; --AqsLC8rIMeq19msA Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (FreeBSD) iD8DBQFG2qWbwa4WkdMP0jkRAkn8AJ0SoWTauS0xf8sWC54nWCs6K4eb5gCg+f3w nOCtzrsG9zuOjacVt09MWnA= =BKZJ -----END PGP SIGNATURE----- --AqsLC8rIMeq19msA--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070902115924.GA38350>