Date: Fri, 25 Jan 2008 10:55:09 +0200 From: Andrei Kolu <antik@bsd.ee> To: freebsd-usb@freebsd.org Subject: Re: apcupsd: bsd-usb.c:774 set_report for kill power function SelftestStatus failed. Message-ID: <200801251055.10170.antik@bsd.ee> In-Reply-To: <200801221526.30610.antik@bsd.ee> References: <200801221526.30610.antik@bsd.ee>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 22 January 2008 15:26:30 Andrei Kolu wrote: > ugen0: American Power Conversion Smart-UPS 750 FW:651.13.I USB FW:7.3, rev > 1.10/0.06, addr 2 > > > # apctest > > 2008-01-22 15:23:57 apctest 3.14.2 (15 September 2007) freebsd > Checking configuration ... > Attached to driver: usb > sharenet.type = DISABLE > cable.type = USB_CABLE > > You are using a USB cable type, so I'm entering USB test mode > mode.type = USB_UPS > Setting up the port ... > Hello, this is the apcupsd Cable Test program. > This part of apctest is for testing USB UPSes. > > Getting UPS capabilities...SUCCESS > > Please select the function you want to perform. > > 1) Test kill UPS power > 2) Perform self-test > 3) Read last self-test result > 4) Change battery date > 5) View battery date > 6) View manufacturing date > 7) Set alarm behavior > 8) Set sensitivity > 9) Quit > > Select function number: 2 > > > This test instructs the UPS to perform a self-test > operation and reports the result when the test completes. > > Clearing previous self test result...2.918 apcupsd: bsd-usb.c:774 > set_report for kill power function SelftestStatus failed. > FAILED > _______________________________________________ Oops, I forgot to add that this is FreeBSD 6.2-p10. Same problem with other APC ups 1000 with FreeBSD 6.3-RELEASE. I just don't know if this is an apcupsd daemon problem or FreeBSD USB stack- any hint, please?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200801251055.10170.antik>