Date: Thu, 13 Mar 2008 11:07:41 +0100 (CET) From: Leon Kos <leon.kos@lecad.uni-lj.si> To: John Baldwin <jhb@freebsd.org> Cc: Volker <volker@vwsoft.com>, freebsd-acpi@freebsd.org, bug-followup@freebsd.org Subject: Re: kern/121558: Supermicro X7SB4 Fatal trap 12 when ACPI disabled Message-ID: <alpine.DEB.1.00.0803131048360.19891@achilles.lecadnet> In-Reply-To: <200803121145.40714.jhb@freebsd.org> References: <200803111350.m2BDo3T2027051@freefall.freebsd.org> <47D7DFFC.20205@vwsoft.com> <alpine.DEB.1.00.0803121604010.19891@achilles.lecadnet> <200803121145.40714.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Previously I've added hints to /boot/loader.conf and booted GENERIC with ACPI disabled. Moving hints to /boot/device.hints does not help! That's why I've asked if the syntax: hw.pci13.0.INTA.irq="16" hw.pci15.0.INTA.irq="17" hw.pci5.0.INTA.irq="19" is correct? I am still getting "No I/O APIC 0 to route interrupt to" as shown in http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1650.jpg I've also tried to boot OpenSUSE 10.3 that has kernel 2.6.21.5-31 and it boots with or without ACPI. http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1651.jpg shows dmesg and /proc/interrupts with acpi=off http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1652.jpg is the same with enabled ACPI (default) Linux appears to work well with this board. Even handles reboot well while FreeBSD 7.0 after upgrade does not as I staded before and shown in photo http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1637.jpg Kind regards! Leon Kos, CAD lab, Mech.Eng., University of Ljubljana, Slovenia (http://www.lecad.uni-lj.si/~leon)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.DEB.1.00.0803131048360.19891>