Date: Fri, 14 Mar 2008 21:57:44 +0100 From: Wael Nasreddine <mla@nasreddine.com> To: freebsd-questions@freebsd.org Subject: Re: apache 2.2.8 uid 80: exited on signal 4 Message-ID: <20080314205744.GK9831@phoenix.nasreddine.info> In-Reply-To: <20080314194203.GJ9831@phoenix.nasreddine.info> References: <264730.93904.qm@web33705.mail.mud.yahoo.com> <200803141832.41139.fbsd.questions@rachie.is-a-geek.net> <20080314175546.GH9831@phoenix.nasreddine.info> <1d3ed48c0803141114y1b1c73beh7a8f8d1b3815c6a4@mail.gmail.com> <20080314194203.GJ9831@phoenix.nasreddine.info>
next in thread | previous in thread | raw e-mail | index | archive | help
--kswDJesP0akhmDn8 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable This One Time, at Band Camp, Wael Nasreddine <mla@nasreddine.com> said, On = Fri, Mar 14, 2008 at 08:42:03PM +0100: > This One Time, at Band Camp, Kevin Downey <redchin@gmail.com> said, On Fr= i, Mar 14, 2008 at 11:14:59AM -0700: > > I had a similar problem. I fixed it my commenting out one of the > > extensions listed in /usr/local/etc/php/extensions.ini > > I forgot which one. I currently have three of them commented out: > > #extension=3Dmcrypt.so > > #extension=3Dmbstring.so > > #extension=3Dmhash.so > I have commented the same modules that you have... I will try with it > this way and see if it happens again... > Thanks Ok that actually does work, I did more tests and the modules causing this are extension=3Dmbstring.so extension=3Dmcrypt.so both of them cause the Segfault(11) the nhash.so module is ok... Thanks > > On Fri, Mar 14, 2008 at 10:55 AM, Wael Nasreddine <mla@nasreddine.com> = wrote: > > > This One Time, at Band Camp, Mel <fbsd.questions@rachie.is-a-geek.net= > said, On Fri, Mar 14, 2008 at 06:32:40PM +0100: > > > > On Friday 14 March 2008 16:32:30 Abdullah Ibn Hamad Al-Marri wrote: > > > > > Hello, > > > > > I have this problem with apache 2.2.8, and I don't know the reas= on yet. > > > > > FreeBSD 7.0-STABLE #0: Fri Feb 29 16:57:56 UTC 2008 > > > > > admin@BB.WeArab.Net:/usr/obj/usr/src/sys/BB > > > > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > > > > CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz K8-class CPU) > > > > > Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1 > > > > > Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE= P,MTRR,PGE,MC > > > > >A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > > > > Features2=3D0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR> > > > > > AMD Features=3D0x20100800<SYSCALL,NX,LM> > > > > > Logical CPUs per core: 2 > > > > > usable memory =3D 2139377664 (2040 MB) > > > > > avail memory =3D 2064826368 (1969 MB) > > > > > ACPI APIC Table: <IntelR AWRDACPI> > > > > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > > > > cpu0 (BSP): APIC ID: 0 > > > > > cpu1 (AP): APIC ID: 1 > > > > > ioapic0: Changing APIC ID to 4 > > > > > ioapic0 <Version 2.0> irqs 0-23 on motherboard > > > > > ioapic1 <Version 2.0> irqs 24-47 on motherboard > > > > > acpi0: <IntelR AWRDACPI> on motherboard > > > > > acpi0: [ITHREAD] > > > > > acpi0: Power Button (fixed) > > > > > acpi0: reservation of 0, a0000 (3) failed > > > > > acpi0: reservation of 100000, 7fde0000 (3) failed > > > > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > > > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on a= cpi0 > > > > > cpu0: <ACPI CPU> on acpi0 > > > > > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > > > > > cpu1: <ACPI CPU> on acpi0 > > > > > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > > > > > acpi_button0: <Power Button> on acpi0 > > > > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > > > > pci0: <ACPI PCI bus> on pcib0 > > > > > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > > > > > pci1: <PCI bus> on pcib1 > > > > > pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > > > > > pci2: <ACPI PCI bus> on pcib2 > > > > > em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port > > > > > 0x9000-0x901f mem 0xf9020000-0xf903ffff,0xf9000000-0xf901ffff ir= q 18 at > > > > > device 1.0 on pci2 em0: Ethernet address: 00:11:d8:ba:51:8d > > > > > em0: [FILTER] > > > > > pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > > > > > pci3: <ACPI PCI bus> on pcib3 > > > > > vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem > > > > > 0xfa000000-0xfaffffff,0xfc000000-0xfc000fff irq 24 at device 2.0= on pci3 > > > > > pci0: <serial bus, USB> at device 29.0 (no driver attached) > > > > > pci0: <serial bus, USB> at device 29.1 (no driver attached) > > > > > pci0: <base peripheral> at device 29.4 (no driver attached) > > > > > pci0: <serial bus, USB> at device 29.7 (no driver attached) > > > > > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > > > > pci4: <ACPI PCI bus> on pcib4 > > > > > atapci0: <Promise PDC20319 SATA150 controller> port > > > > > 0xb000-0xb03f,0xb400-0xb40f,0xb800-0xb87f mem > > > > > 0xfd020000-0xfd020fff,0xfd000000-0xfd01ffff irq 23 at device 4.0= on pci4 > > > > > atapci0: [ITHREAD] > > > > > atapci0: [ITHREAD] > > > > > ata2: <ATA channel 0> on atapci0 > > > > > ata2: [ITHREAD] > > > > > ata3: <ATA channel 1> on atapci0 > > > > > ata3: [ITHREAD] > > > > > ata4: <ATA channel 2> on atapci0 > > > > > ata4: [ITHREAD] > > > > > ata5: <ATA channel 3> on atapci0 > > > > > ata5: [ITHREAD] > > > > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > > > > isa0: <ISA bus> on isab0 > > > > > atapci1: <Intel 6300ESB SATA150 controller> port > > > > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at devi= ce 31.2 on > > > > > pci0 ata0: <ATA channel 0> on atapci1 > > > > > ata0: [ITHREAD] > > > > > ata1: <ATA channel 1> on atapci1 > > > > > ata1: [ITHREAD] > > > > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > > > > > pci0: <multimedia, audio> at device 31.5 (no driver attached) > > > > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > > > > sio0: port may not be enabled > > > > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > > > > sio0: port may not be enabled > > > > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags = 0x10 on > > > > > acpi0 sio0: type 16550A > > > > > sio0: [FILTER] > > > > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > > > > sio1: port may not be enabled > > > > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > > > > sio1: port may not be enabled > > > > > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acp= i0 > > > > > sio1: type 16550A > > > > > sio1: [FILTER] > > > > > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 > > > > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > > > > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > > > > kbd0 at atkbd0 > > > > > atkbd0: [GIANT-LOCKED] > > > > > atkbd0: [ITHREAD] > > > > > sc0: <System console> at flags 0x100 on isa0 > > > > > sc0: VGA <16 virtual consoles, flags=3D0x300> > > > > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbfff= f on isa0 > > > > > Timecounters tick every 1.000 msec > > > > > ad0: 238475MB <WDC WD2500JD-50FYB0 02.05D02> at ata0-master SATA= 150 > > > > > ad4: 238475MB <WDC WD2500JD-50FYB0 02.05D02> at ata2-master SATA= 150 > > > > > ad6: 381554MB <WDC WD4000KD-00NAB0 01.06A01> at ata3-master SATA= 150 > > > > > SMP: AP CPU #1 Launched! > > > > > Trying to mount root from ufs:/dev/ad0s1a > > > > > em0: link state changed to UP > > > > > pid 8458 (httpd), uid 80: exited on signal 4 > > > > > pid 82334 (httpd), uid 80: exited on signal 4 > > > > > pid 82374 (httpd), uid 80: exited on signal 4 > > > > > pid 82375 (httpd), uid 80: exited on signal 4 > > > > > pid 82423 (httpd), uid 80: exited on signal 4 > > > > > pid 82520 (httpd), uid 80: exited on signal 4 > > > > > pid 88487 (httpd), uid 80: exited on signal 4 > > > > > pid 98657 (httpd), uid 80: exited on signal 4 > > > > > pid 52780 (httpd), uid 80: exited on signal 4 > > > > > pid 58619 (httpd), uid 80: exited on signal 4 > > > > #define SIGILL 4 /* illegal instr. (not reset when = caught) */ > > > > If you're sure there are no CPU specific flags set during apache c= ompilation, > > > > you might want to get a core dump. Is apache the only program crea= ting > > > > SIGILL? > > > I'm having a similar issue, ny dmesg is filled with > > > -------- CUT > > > pid 63364 (httpd), uid 80: exited on signal 11 > > > -------- CUT > > > my /etc/make.conf: > > > -------- CUT > > > CFLAGS+=3D"-march=3Dpentium4" > > > WITHOUT_X11=3Dyes > > > WITHOUT_JAVA=3Dyes > > > # Use Perl with threads > > > WITH_THREADS=3Dyes > > > # added by use.perl 2008-03-13 22:04:11 > > > PERL_VER=3D5.8.8 > > > PERL_VERSION=3D5.8.8 > > > -------- CUT > > > what could be the problem... > > > -- > > > Wael Nasreddine > > > http://wael.nasreddine.com > > > PGP: 1024D/C8DD18A2 06F6 1622 4BC8 4CEB D724 DE12 5565 3945 C8DD 18= A2 > > > .: An infinite number of monkeys typing into GNU emacs, > > > would never make a good program. (L. Torvalds 1995) :. --=20 Wael Nasreddine http://wael.nasreddine.com PGP: 1024D/C8DD18A2 06F6 1622 4BC8 4CEB D724 DE12 5565 3945 C8DD 18A2 =2E: An infinite number of monkeys typing into GNU emacs, would never make a good program. (L. Torvalds 1995) :. --kswDJesP0akhmDn8 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.7 (GNU/Linux) iD8DBQFH2ubIVWU5RcjdGKIRAsq1AKDsg3W8bJH6kT5EHHr4hl0iS6f9jgCg2lkD 3ONA77f2m1Sizd6+KLiHFnA= =XMAK -----END PGP SIGNATURE----- --kswDJesP0akhmDn8--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080314205744.GK9831>