Date: Mon, 14 Apr 2008 04:15:48 +0200 From: Pieter de Goeje <pieter@degoeje.nl> To: freebsd-current@freebsd.org Subject: Re: ata wrongly detects both harddisks as the same model Message-ID: <200804140415.48357.pieter@degoeje.nl> In-Reply-To: <200804131616.26503.pieter@degoeje.nl> References: <200804131616.26503.pieter@degoeje.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 13 April 2008, Pieter de Goeje wrote: > FreeBSD-current from ~14:00 CEST, 13th of April fails to mount root due to > apparently a harddisk detection problem. The system has two different ide > harddisks, connected to the same controller on the same cable. They used to > be detected as: > > ad0: 114473MB <WDC WD1200JB-00EVA0 15.05R15> at ata0-master UDMA100 > ad1: 114498MB <SAMSUNG SP1203N TL100-24> at ata0-slave UDMA100 > > But now it is: > > ad0: 114473MB <WDC WD1200JB-00EVA0 15.05R15> at ata0-master UDMA100 > ad1: 114473MB <WDC WD1200JB-00EVA0 15.05R15> at ata0-slave UDMA100 > > It doesn't boot because the root partition is on ad1. > > pciconf -vl: > > atapci1@pci0:0:15:1: class=0x01018a card=0x70941462 chip=0x05711106 > rev=0x06 hdr=0x00 > vendor = 'VIA Technologies Inc' > device = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C Bus Master IDE > Controller' > class = mass storage > subclass = ATA > > Verbose dmesg -current from 1st of April > http://unforgiven.student.utwente.nl/~pyotr/current-ata-good > > Verbose dmesg -current from 13th of April > http://unforgiven.student.utwente.nl/~pyotr/current-ata-bad Latest updates to ata fixed the problem. -- Pieter de Goeje
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200804140415.48357.pieter>