Date: Sat, 19 Apr 2008 17:40:13 +0300 From: Manolis Kiagias <sonicy@otenet.gr> To: Marco Beishuizen <mbeis@xs4all.nl> Cc: freebsd-questions@freebsd.org, Eric <eric@mikestammer.com> Subject: Re: FreeBSD 7.0 not executing /usr/local/etc/rc.d/ at startup Message-ID: <480A044D.9050700@otenet.gr> In-Reply-To: <20080419162933.13342c74@yokozuna.lan> References: <20080419020709.615ac487@yokozuna.lan> <20080419153702.1b2d9796@yokozuna.lan> <4809F75B.1000008@mikestammer.com> <20080419160701.3416f054@yokozuna.lan> <4809FFB4.7090902@otenet.gr> <20080419162933.13342c74@yokozuna.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
Marco Beishuizen wrote: > On Sat, 19 Apr 2008 17:20:36 +0300 > Manolis Kiagias <sonicy@otenet.gr> wrote: > > >> securelevel -1 is fine. This is the default: >> quote from init(8): >> >> -1 Permanently insecure mode - always run the system in level 0 >> mode. This is the default initial value. >> >> Your problem lies elsewhere. I've looked at your rc.conf, and I can't >> really say I can see anything except this: >> >> accf_http_load="YES" >> >> which should be in /boot/loader.conf (?) >> You have a lot of stuff, I would suggest you comment out most of them >> and put them back in one by one. >> > > There wasn't this much stuff before, but after upgrading to 7.0 I got a > lot of boot messages saying that xxxx_enable "is not set properly". So > then I had to insert all those statements xxxx_enable="NO". After that > all those messages went away. > Ah!!! It just clicked! You got a lot of _enable="NO" This is rather unusual - you usually override something from /etc/defaults/rc.conf with a "YES" Your /etc/defaults/rc.conf has missing entries. It probably was not upgraded properly (during the mergemaster phase?) For example, /etc/defaults/rc.conf normally has this: zfs_enable="NO" # Set to YES to automatically mount ZFS file systems but yours doesn't, that's why you had to put it in /etc/rc.conf by hand. I suggest you try with an /etc/defaults/rc.conf from the installation media (I can send you mine if you wish)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?480A044D.9050700>