Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 3 Oct 2008 11:08:40 +0200
From:      Oliver Lehmann <lehmann@ans-netz.de>
To:        cpghost <cpghost@cordula.ws>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: system hangup - I'm lost
Message-ID:  <20081003110840.f1c2d5da.lehmann@ans-netz.de>
In-Reply-To: <20081002225036.GC2539@phenom.cordula.ws>
References:  <20080929221408.54e6a03a.lehmann@ans-netz.de> <20081001172943.99e9d494.lehmann@ans-netz.de> <20081002185106.a1183896.lehmann@ans-netz.de> <20081002225036.GC2539@phenom.cordula.ws>

next in thread | previous in thread | raw e-mail | index | archive | help
cpghost wrote:


> If it's PATA, check the cabling, then check it again, and just to
> make sure, replace the cable even if the system used to work flawlessly
> in the past. I've had this on a few servers, but replacing the cables
> always fixed the problem for me.

It's SATA - it's a 3ware 9500S-4LP controller. I can just hope it would have
detect any drive problem (even if it would result because of bad cabeling). If
not I don't know why I had a raid controller anyway ;)
The only other disk drive I've on that system is an USB attached hdd for backup
purpose... So I can't realy try having the swap somewhere else..

//nudel> /c0 show all
/c0 Driver Version = 3.60.04.003
/c0 Model = 9500S-4LP
/c0 Available Memory = 112MB
/c0 Firmware Version = FE9X 2.08.00.009
/c0 Bios Version = BE9X 2.03.01.052
/c0 Boot Loader Version = BL9X 2.02.00.001
/c0 Serial Number = D19004A5300589
/c0 PCB Version = Rev 019
/c0 PCHIP Version = 1.50
/c0 ACHIP Version = 3.20
/c0 Number of Ports = 4
/c0 Number of Drives = 4
/c0 Number of Units = 1
/c0 Total Optimal Units = 1
/c0 Not Optimal Units = 0 
/c0 JBOD Export Policy = off
/c0 Disk Spinup Policy = 1
/c0 Spinup Stagger Time Policy (sec) = 2
/c0 Cache on Degrade Policy = Follow Unit Policy

Unit  UnitType  Status         %RCmpl  %V/I/M  Stripe  Size(GB)  Cache  AVrfy
------------------------------------------------------------------------------
u0    RAID-5    OK             -       -       64K     698.461   ON     OFF    

Port   Status           Unit   Size        Blocks        Serial
---------------------------------------------------------------
p0     OK               u0     232.88 GB   488397168     WD-WCANK1079272     
p1     OK               u0     232.88 GB   488397168     WD-WCANK1120378     
p2     OK               u0     232.88 GB   488397168     WD-WCANK1120936     
p3     OK               u0     232.88 GB   488397168     WD-WCANK1120805     

Name  OnlineState  BBUReady  Status    Volt     Temp     Hours  LastCapTest
---------------------------------------------------------------------------
bbu   On           Yes       OK        OK       OK       255    24-Aug-2008  

//nudel> 

-- 
 Oliver Lehmann
  http://www.pofo.de/
  http://wishlist.ans-netz.de/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081003110840.f1c2d5da.lehmann>