Date: Tue, 3 Feb 2009 10:59:04 -0500 From: Jerry McAllister <jerrymc@msu.edu> To: Mike Jeays <mike.jeays@rogers.com>, freebsd-questions@freebsd.org Cc: William Bulley <web@umich.edu> Subject: Re: short-changed on SD card? Message-ID: <20090203155904.GA26818@gizmo.acns.msu.edu> In-Reply-To: <20090203123705.GD6430@dell1> References: <20090203123705.GD6430@dell1>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Feb 03, 2009 at 07:37:05AM -0500, William Bulley wrote: > According to Mike Jeays <mike.jeays@rogers.com> on Mon, 02/02/09 at 19:38: > > > > I think I would try dd if=/dev/zero of=/dev/da1 bs=1M > > without the count option, and see how many blocks it writes. You at least > > start with a clean slate, and can run fdisk and newfs, if you want > > a BSD-only > > device. Make sure you write on the right device! > > So you don't think the "bad card reader" suggestion is relevant? It is another thing to check. > > I will also try this approach. Thanks for all the feedback. Now, > I've got some avenues of testing to work through. Later... Doing the dd has two nice possibilities. One, it might just clear the device up and two, it might give some information about the honest size. This is assuming, of course, that the problem is not the card reader. ////jerry > > Regards, > > web... > > -- > William Bulley Email: web@umich.edu > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090203155904.GA26818>