Date: Thu, 2 Apr 2009 11:40:21 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Cc: Luchezar Georgieff <lucho@sofiaonline.net>, freebsd-gnats-submit@freebsd.org Subject: Re: usb/133296: rum driver not working properly in hostap mode Message-ID: <200904021140.22804.hselasky@c2i.net> In-Reply-To: <200904020704.n3274n1r001634@www.freebsd.org> References: <200904020704.n3274n1r001634@www.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 02 April 2009, Luchezar Georgieff wrote: > >Number: 133296 > >Category: usb > >Synopsis: rum driver not working properly in hostap mode > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Thu Apr 02 07:10:01 UTC 2009 > >Closed-Date: > >Last-Modified: > >Originator: Luchezar Georgieff > >Release: 8.0-CURRENT > >Organization: > >Environment: > > [root@nomad ~]# uname -a > FreeBSD nomad 8.0-CURRENT FreeBSD 8.0-CURRENT #6: Mon Mar 30 19:30:16 UTC > 2009 root@nomad:/usr/obj/usr/src/sys/LUCHIX i386 [root@nomad ~]# > > >Description: > > rum driver not working with several (all I found) usb wireless cards in > hostap mode. At first sight client station is connected and ping is ok. > After putting some load at wireless link ( opening big web page or stating > download file and client machine) link hangs. Sometimes dhcp does not work, > but if I set manual IP address traffic comes for a little time and hangs. > Using tcpdump in most case gives me following output: [root@nomad ~]# > tcpdump -i wlan0 -n > tcpdump: verbose output suppressed, use -v or -vv for full protocol decode > listening on wlan0, link-type EN10MB (Ethernet), capture size 96 bytes > > [root@nomad ~]# tcpdump -i wlan0 -n > tcpdump: verbose output suppressed, use -v or -vv for full protocol decode > listening on wlan0, link-type EN10MB (Ethernet), capture size 96 bytes > > 08:56:26.510840 00:1f:3b:27:22:ab > ff:ff:ff:ff:ff:ff Null Supervisory, > Receiver not Ready, rcv seq 64, Flags [Poll], length 6 08:56:26.510860 > 00:1f:3b:27:22:ab > ff:ff:ff:ff:ff:ff Null Supervisory, Receiver not Ready, > rcv seq 64, Flags [Poll], length 6 > > Sometimes I see traffic from client machine only (arp requests) > > May be it is connected with some broadcasting problem. > > If anybody needs I can provide ssh access to machine - it is test setup, I > want to make 3G/Wireless router for my car :) > > The machine is old P3 (IBM Thinkpad T22), but I have tested on few other > machines with exatcly the same result. > > >How-To-Repeat: > > insert ralink-equiped usb device: > ugen0.2: <Ralink> at usbus0 > rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 2> on usbus0 > rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528 > [root@nomad ~]# > > I use this scrpt to create wlan0: > [root@nomad ~]# cat /root/ifcreate > #!/usr/local/bin/bash > > wifi="wlan0" > wdev="rum0" > wauth="open" > loc="indoor" > > echo creaing $wifi > > ifconfig $wifi down > ifconfig $wifi destroy > > ifconfig $wifi create wlandev $wdev wlanmode hostap authmode $wauth\ > ssid nomad country BG $loc > sleep 2 > ifconfig wlan0 192.168.90.1/24 up > > # wlandebug -i $wifi +scan+auth+debug+assoc > /usr/local/etc/rc.d/isc-dhcpd restart > /etc/rc.d/named restart > pfctl -d > pfctl -f /etc/pf.conf > pfctl -e > > ifconfig wlan0 > > outout from it: > [root@nomad ~]# /root/ifcreate > creaing wlan0 > ifconfig: interface wlan0 does not exist > ifconfig: interface wlan0 does not exist > dhcpd not running? (check /var/run/dhcpd/dhcpd.pid). > Starting dhcpd. > Internet Systems Consortium DHCP Server V3.0.7 > Copyright 2004-2008 Internet Systems Consortium. > All rights reserved. > For info, please visit http://www.isc.org/sw/dhcp/ > Wrote 3 leases to leases file. > Listening on BPF/wlan0/00:18:f3:3a:19:d2/192.168.90/24 > Sending on BPF/wlan0/00:18:f3:3a:19:d2/192.168.90/24 > Sending on Socket/fallback/fallback-net > Stopping named. > Starting named. > pf disabled > pf enabled > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 00:18:f3:3a:19:d2 > inet 192.168.90.1 netmask 0xffffff00 broadcast 192.168.90.255 > media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap> > status: running > ssid nomad channel 1 (2412 Mhz 11g) bssid 00:18:f3:3a:19:d2 > regdomain ETSI country BG indoor authmode OPEN privacy OFF txpower > 30 scanvalid 60 protmode CTS dtimperiod 1 -dfs > [root@nomad ~]# > [ > > >Fix: > > > > > >Release-Note: > >Audit-Trail: > >Unformatted: Does the dongle work fine in client mode? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904021140.22804.hselasky>