Date: Mon, 30 Nov 2009 04:42:28 +0100 From: Jason Edwards <sub.mesa@gmail.com> To: pyunyh@gmail.com Cc: freebsd-usb@freebsd.org Subject: Re: usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic Message-ID: <883b2dc50911291942n618bcaax2bb76e3e246be25f@mail.gmail.com> In-Reply-To: <20091129015142.GB1355@michelle.cdnetworks.com> References: <200911260840.nAQ8e4c7030168@freefall.freebsd.org> <20091129015142.GB1355@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[root@mesa /]# devinfo -rv | grep phy
(..)
ukphy1 pnpinfo oui=0x606e model=0xc rev=0x0 at phyno=0
(..)
I understand my device may have the same name, but different PHY thus
is actually a different product.
In order to debug this problem i need physical access to change the
ethernet cables (and replug the device once its stuck). Probably might
get the chance tomorrow.
Aside from enabling debug and trying to get it to the point it fails,
what else could i try to identify the problem or is there any other
information you require to diagnose this issue?
Thanks for looking into it!
Kind regards,
sub
On 11/29/09, Pyun YongHyeon <pyunyh@gmail.com> wrote:
> On Thu, Nov 26, 2009 at 08:40:04AM +0000, Hans Petter Selasky wrote:
>> The following reply was made to PR usb/140883; it has been noted by GNATS.
>>
>> From: Hans Petter Selasky <hselasky@c2i.net>
>> To: freebsd-usb@freebsd.org
>> Cc: sub mesa <sub.mesa@gmail.com>,
>> freebsd-gnats-submit@freebsd.org
>> Subject: Re: usb/140883: axe(4) USB gigabit ethernet hangs after short
>> period of traffic
>> Date: Thu, 26 Nov 2009 09:32:43 +0100
>>
>> On Thursday 26 November 2009 03:59:55 sub mesa wrote:
>> > >Number: 140883
>> > >Category: usb
>> > >Synopsis: axe(4) USB gigabit ethernet hangs after short period
>> of
>> > > traffic Confidential: no
>> > >Severity: serious
>> > >Priority: medium
>> > >Responsible: freebsd-usb
>> > >State: open
>> > >Quarter:
>> > >Keywords:
>> > >Date-Required:
>> > >Class: sw-bug
>> > >Submitter-Id: current-users
>> > >Arrival-Date: Thu Nov 26 03:00:11 UTC 2009
>> > >Closed-Date:
>> > >Last-Modified:
>> > >Originator: sub mesa
>> > >Release: FreeBSD 8.0-RELEASE i386
>> > >Organization:
>> > >Environment:
>> >
>> > FreeBSD gut 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Wed Nov 25 14:30:17 CET
>> > 2009 xor@xor:/usr/obj/usr/src/sys/XOR i386
>> >
>> > >Description:
>> >
>> > I own a USB gigabit ethernet adapter with ASIX Electronics AX88178 chip
>> > supported by the axe(4) driver in FreeBSD 8.0. It works, but it
>> 'freezes'
>> > or 'hangs' after some traffic, like downloading at ~50Mbps for 5-10
>> minutes
>> > will cause the device to freeze. This has been happening since a long
>> time
>> > on 8.0, ever since i bought the device and was running one of the early
>> > beta's. Upgrading to the final release of 8.0 did not resolve the
>> issue.
>> >
>> > Googling on the problem i found this mailinglist thread:
>> >
>> http://lists.freebsd.org/pipermail/freebsd-current/2009-April/005738.html
>> >
>> > However, there doesn't seem to be a single conclusion. Even though my
>> > product ("Belkin F5D5055") seems to be supported according to the
>> axe(4)
>> > manpage, it doesn't get detected as such, rather with a vendor id.
>> Quoting
>> > dmesg output:
>> >
>> > axe0: <vendor 0x050d product 0x5055, rev 2.00/0.01, addr 2> on usbus4
>> > axe0: PHYADDR 0xe0:0x01
>> > miibus1: <MII bus> on axe0
>> > ue0: <USB Ethernet> on axe0
>> >
>> > May i suggest removing the Belkin F5D5055 from the supported devices
>> list
>> > in the axe(4) manpage, until a fix has been committed? I specifically
>> > bought the device believing it would work since it was explicitly
>> listed in
>> > the manpage. As of 8.0, it doesn't even get detected by name. It is of
>> > course possible my device is of a different revision.
>
> I frequently see some vendors do not change their model name even
> though the controller's internal chipset/PHY was changed. I guess
> the original FD5055 have used different PHY so it might have worked
> at that time.
>
>> >
>> > I would be happy to try any patches.
>> >
>> > Also see:
>> > http://forums.freebsd.org/showthread.php?t=8661
>> >
>> > >How-To-Repeat:
>> >
>> > Connect axe(4) gigabit ethernet device
>> > Send/receive packets using the ueX ethernet device
>> > Device will stop receiving/transmitting packets after a short while
>> >
>
> I remember some user also reported instability of axe(4) on Belkin
> F5D5055. I'm not sure what PHY driver was attached to your
> controller but it could also be a variant of LSI TruePHY.
> Would you show me the output of "devinfo -rv | grep phy"?
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?883b2dc50911291942n618bcaax2bb76e3e246be25f>