Date: Sat, 26 Dec 2009 09:42:48 -0500 From: Steven Friedrich <freebsd@insightbb.com> To: Sam Leffler <sam@errno.com>, freebsd-net@freebsd.org Subject: Re: uath under FreeBSD 8.0-STABLE Message-ID: <200912260942.48320.freebsd@insightbb.com> In-Reply-To: <20091226044243.GE11506@weongyo> References: <200912151603.32111.freebsd@insightbb.com> <4B35160C.3040701@errno.com> <20091226044243.GE11506@weongyo>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 25 December 2009 11:42:43 pm Weongyo Jeong wrote: > On Fri, Dec 25, 2009 at 11:44:12AM -0800, Sam Leffler wrote: > > Steven Friedrich wrote: > > >On Thursday 24 December 2009 05:09:42 pm Weongyo Jeong wrote: > > >>OK. It looks weird idProduct didn't be decreased 1 after loading the > > >>firmware. > > >> > > >>And what I'd like to see is the *full* result of the following steps: > > >> > > >> 1. plugs in your USB device. > > >> 2. run commands as follows: > > >> > > >> # kldload if_uath > > >> # dmesg | tail > > >> # uathload -v -d /dev/ugen4.3 > > >> # dmesg | tail > > >> > > >>In a theory, after loading the firmware normally the device which at > > >> the moment idProduct is 0x4251 is detached and reseted then it should > > >> be reattached with idProduct(0x4250). > > >> > > >>regards, > > >>Weongyo Jeong > > > > > >Opps, I'm sorry, the reply I just sent ws wrong because once you've used > > >uathload, you have to unplugplug the device before you can run it again. > > >So here it is: > > >Load firmware ar5523.bin (builtin) to /dev/ugen4.3 > > >send block 0: 147368 bytes remaining > > > > > > : data... > > > : wait for ack...flags=0x14 total=149416 > > > > <...snip...> > > > > The device should detach and be re-enumerated w/ a different device id > > that the driver attaches to. Hard to say why it does not. > > > > uathload should be automatically run by devd but it appears the devd > > rules file I did got lost (don't see it in the tree). > > I agree with sam@ that it's hard to understand why it's not detached > after downloading the firmware. > > Yesterday I ordered `Netgear Wireless USB Adapter WG111T' which probably > is same one with you so I could reproduce your problem and debug it. > > regards, > Weongyo Jeong > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" > Thanks for your effort. I appreciate it.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200912260942.48320.freebsd>