Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Apr 2010 11:39:57 -1000
From:      Al Plant <noc@hdk5.net>
To:        freebsd-questions@freebsd.org
Subject:   Re: Driver for Belkin F5D9050 V 4000
Message-ID:  <4BD9FCAD.1070104@hdk5.net>
In-Reply-To: <20100429164546.5cdd4bcc@scorpio.seibercom.net>
References:  <BLU0-SMTP3199B87DE7EA7341EBBED493030@phx.gbl>	<41494fb6b51209157d5786b87dea2376.squirrel@whipp.no-ip.org>	<27c8fe78f7bdc52f8e79bd19dd387f3c.squirrel@whipp.no-ip.org>	<20100429102005.13dbb501@scorpio.seibercom.net>	<g2mb79ecaef1004290834u726a7d61o4df2acdde8bdfbb1@mail.gmail.com>	<20100429130144.1cb1eef1@scorpio.seibercom.net>	<4BD9DC07.3090008@hdk5.net> <20100429164546.5cdd4bcc@scorpio.seibercom.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Jerry wrote:
> On Thu, 29 Apr 2010 09:20:39 -1000
> Al <noc@hdk5.net> articulated:
> 
>> Jerry wrote:
>>> On Thu, 29 Apr 2010 16:34:29 +0100
>>> Chris <utisoft@googlemail.com> articulated:
>>>
>>>> Do you have to use FreeBSD/amd64 instead of FreeBSD/i386? I'm only
>>>> asking in case you recently installed, I know it's not an ideal
>>>> solution.
>>> Well, no one is holding a gun to my head if that is what you mean.
>>> However, to take advantage of all the memory I have in this system,
>>> as well as the improved overall system performance, yes I do have
>>> to use the 64bit version.
>>>
>>> IMHO, 32bit systems are all ready becoming passe. I predict
>>> that they will go the way of the dinosaur in 5 years or less.
>>>
>>> I did have i386 installed on this system briefly because there were
>>> no 64bit nVidia drivers available. After switching to 64bit I have
>>> noticed a real improvement in overall system performance.
>>>
>> ##########
>>
>> Aloha,
>>
>> Q:
>> Are the drivers available for 64bit nvidia cards (imbeded in mobo)? I 
>> have not found a good how to on line for istalling on FreeBSD 8.*
>> I have an install that works fine on 64 bit amd until the video
>> section for desktop use.
>> Even the DVD Manolis produced doesnt make the video work. It just 
>> flashaes on for a few seconds then dies off.
>>
>> Any pointers to a how-to much appreciated.
> 
> Port:   nvidia-driver-195.36.15
> Path:   /usr/ports/x11/nvidia-driver
> Info:   NVidia graphics card binary drivers for hardware OpenGL rendering
> 
> Port:   nvidia-settings-195.36.15
> Path:   /usr/ports/x11/nvidia-settings
> Info:   Display Control Panel for X NVidia driver
> 
> Port:   nvidia-xconfig-195.36.15
> Path:   /usr/ports/x11/nvidia-xconfig
> Info:   Tool to manipulate X configuration files for the NVidia driver
> 
> <quote>
> To use these drivers, make sure that you have loaded the nvidia kernel
> module, by doing
> 
>         # kldload nvidia
> 
> or adding
> 
>         nvidia_load="YES"
> 
> to your /boot/loader.conf.
> 
> If you build this port with WITH_FREEBSD_AGP=yes, make sure you have
> agp.ko kernel module installed and loaded, since nvidia.ko will depend
> on it, or have your kernel compiled with "device agp".  Otherwise the
> nvidia kernel module will not load.  Also, care to specify correct
> ``Option "NvAGP"'' in ``Device'' section of your X11 configuration file.
> 
> When building with Linux compatibility (WITH_LINUX=yes), make sure
> linux.ko is available as well (or have it compiled in kernel).  It can
> be loaded via /boot/loader.conf (or later in boot process if you add
> 
>         linux_enable="YES"
> 
> to your /etc/rc.conf.
> 
> Note that this driver does not support PAE-enabled kernels.
> </quote>
> 
#########

Jerry,


Many thanks.

~Al Plant - Honolulu, Hawaii -  Phone:  808-284-2740
   + http://hawaiidakine.com + http://freebsdinfo.org +
   + http://aloha50.net   - Supporting - FreeBSD  7.2 - 8.0 - 9* +
   < email: noc@hdk5.net >
"All that's really worth doing is what we do for others."- Lewis Carrol




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BD9FCAD.1070104>