Date: Mon, 01 Nov 2010 08:38:15 -0400 From: Stephen Clark <sclark46@earthlink.net> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-stable@freebsd.org, Jeremy Chadwick <freebsd@jdc.parodius.com> Subject: Re: safe mode Message-ID: <4CCEB4B7.6030006@earthlink.net> In-Reply-To: <201010291720.11771.jhb@freebsd.org> References: <4CCAE59E.5020006@earthlink.net> <4CCB25CC.9050405@earthlink.net> <4CCB2C88.9050208@earthlink.net> <201010291720.11771.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/29/2010 05:20 PM, John Baldwin wrote:
> On Friday, October 29, 2010 4:20:24 pm Stephen Clark wrote:
>
>>> rr232x: RocketRAID 232x controller driver v1.02 (Jan 16 2008 04:16:21)
>>> hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 04:16:19)
>>>
>>>
>> big snip
>>
>>> lo0: bpf attached
>>> rr232x: no controller detected.
>>> hptrr: no controller detected.
>>> m
>>>
>>>
>> Why does FreeBSD think I have a rocket raid controller? This the generic
>> kernel.
>> Is there some way disable this from loading?
>>
> The hptrr driver is in GENERIC in 6.x and it always prints out the first
> message. You can ignore it.
>
>
Hi John,
Here is the verbose boot from the 7.2 release iso
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000003f9a0000
SMAP type=03 base=000000003faa0000 len=000000000000e000
SMAP type=04 base=000000003faae000 len=0000000000032000
SMAP type=02 base=000000003fae0000 len=0000000000010000
SMAP type=02 base=000000003faf0000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ffb00000 len=0000000000500000
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc129f000.
Preloaded mfs_root "/boot/mfsroot" at 0xc129f1ac.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc129f1f0.
Calibrating clock(s) ... i8254 clock: 1189628 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1673321840 Hz
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1673.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,<b22>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Logical CPUs per core: 2
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 512 kbytes, 8-way associative, 64 bytes/line
real memory = 1068105728 (1018 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001425000 - 0x000000003e86cfff, 1027899392 bytes (250952 pages)
avail memory = 1027330048 (979 MB)
Table 'FACP' at 0x3faa0290
Table 'APIC' at 0x3faa0390
MADT: Found table at 0x3faa0390
MP Configuration Table version 1.4 found at 0xc00fdc90
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
SMP: Added CPU 3 (AP)
ACPI APIC Table: <080610 APIC1657>
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f6100
pnpbios: Entry = f0000:78ba Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu 1
ULE: adding cpu 1 to group 0: cpus 2 mask 0x3
ULE: setup cpu group 1
ULE: setup cpu 2
ULE: adding cpu 2 to group 1: cpus 1 mask 0x4
ULE: setup cpu 3
ULE: adding cpu 3 to group 1: cpus 2 mask 0xC
ACPI: RSDP @ 0x0xf9d50/0x0024 (v 2 ACPIAM)
ACPI: XSDT @ 0x0x3faa0100/0x004C (v 1 080610 XSDT1657 0x20100806 MSFT
0x000000)
ACPI: FACP @ 0x0x3faa0290/0x00F4 (v 4 080610 FACP1657 0x20100806 MSFT
0x000000)
ACPI: DSDT @ 0x0x3faa0440/0x6C25 (v 2 1AEMZ 1AEMZ005 0x00000005 INTL
0x200511)
ACPI: FACS @ 0x0x3faae000/0x0040
ACPI: APIC @ 0x0x3faa0390/0x006C (v 2 080610 APIC1657 0x20100806 MSFT
0x000000)
ACPI: MCFG @ 0x0x3faa0400/0x003C (v 1 080610 OEMMCFG 0x20100806 MSFT
0x000000)
ACPI: OEMB @ 0x0x3faae040/0x0072 (v 1 080610 OEMB1657 0x20100806 MSFT
0x000000)
ACPI: GSCI @ 0x0x3faae0c0/0x2024 (v 1 080610 GMCHSCI 0x20100806 MSFT
0x000000)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 1 2009
08:47:24)
npx0: INT 16 interface
acpi0: <080610 XSDT1657> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc427e000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=a0008086)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: reservation of ffc00000, 300000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fa00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 6 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0xa000, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xa001, revid=0x02
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xfe980000, size 19, enabled
map[14]: type I/O Port, range 32, base 0xcc00, size 3, enabled
map[18]: type Prefetchable Memory, range 32, base 0xd0000000,
size 28, d
map[1c]: type Memory, range 32, base 0xfe800000, size 20, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa002, revid=0x02
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe780000, size 19, enabled
found-> vendor=0x8086, dev=0x2834, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0xc880, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2835, revid=0x03
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0xc800, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283a, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe977c00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x283f, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2845, revid=0x03
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2830, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
map[20]: type I/O Port, range 32, base 0xc480, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2831, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0xc400, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2832, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type I/O Port, range 32, base 0xc080, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2836, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe977800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0xf3
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2815, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2850, revid=0x03
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
found-> vendor=0x8086, dev=0x2828, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=15
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
map[24]: type I/O Port, range 32, base 0xb400, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
found-> vendor=0x8086, dev=0x283e, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 32, base 0xfe977400, size 8, enabled
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem
0xfe980000-0xfe9fffff,0
vgapci1: <VGA-compatible display> mem 0xfe780000-0xfe7fffff at device
2.1 on pc0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xc880-0xc89f irq
16 at 0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc880
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xc800-0xc81f irq
21 at 0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xfe977c00-0xfe977ff0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe977c00
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib1: <ACPI PCI-PCI bridge> irq 22 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: prefetched decode 0xfdf00000-0xfdffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x03
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled
pcib2: requested I/O range 0xd800-0xd8ff: in range
map[18]: type Prefetchable Memory, range 64, base 0xfdfff000,
size 12, d
pcib2: requested memory range 0xfdfff000-0xfdffffff: good
map[20]: type Prefetchable Memory, range 64, base 0xfdff8000,
size 14, d
pcib2: requested memory range 0xfdff8000-0xfdffbfff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe
Gigabit Eth2
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfdfff000
re0: MSI count : 1
re0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 52
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-o
re0: bpf attached
re0: Ethernet address: 00:30:18:ae:ae:51
re0: [MPSAFE]
re0: [FILTER]
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xc480-0xc49f irq
23 at 0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc480
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xc400-0xc41f irq
19 at 0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xc080-0xc09f irq
18 at 0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc080
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xfe977800-0xfe977bf0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe977800
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
umass0: <vendor 0x059b USB 2.0 Storage Device, class 0/0, rev 2.00/1.03,
addr 26
umass0:0:0:-1: Attached to scbus0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfeb00000-0xfebfffff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x10ec, dev=0x8139, revid=0x10
domain=0, bus=3, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xe800, size 8, enabled
pcib3: requested I/O range 0xe800-0xe8ff: in range
map[14]: type Memory, range 32, base 0xfebffc00, size 8, enabled
pcib3: requested memory range 0xfebffc00-0xfebffcff: good
pcib3: matched entry for 3.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 18
found-> vendor=0x10ec, dev=0x8139, revid=0x10
domain=0, bus=3, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xe400, size 8, enabled
pcib3: requested I/O range 0xe400-0xe4ff: in range
map[14]: type Memory, range 32, base 0xfebff800, size 8, enabled
pcib3: requested memory range 0xfebff800-0xfebff8ff: good
pcib3: matched entry for 3.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 19
found-> vendor=0x10ec, dev=0x8139, revid=0x10
domain=0, bus=3, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled
pcib3: requested I/O range 0xe000-0xe0ff: in range
map[14]: type Memory, range 32, base 0xfebff400, size 8, enabled
pcib3: requested memory range 0xfebff400-0xfebff4ff: good
pcib3: matched entry for 3.7.INTA
pcib3: slot 7 INTA hardwired to IRQ 16
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff i3
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:30:18:a1:7f:e9
rl0: [MPSAFE]
rl0: [ITHREAD]
rl1: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem
0xfebff800-0xfebff8ff i3
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
miibus2: <MII bus> on rl1
rlphy1: <RealTek internal media interface> PHY 0 on miibus2
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:30:18:a1:7f:ea
rl1: [MPSAFE]
rl1: [ITHREAD]
rl2: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem
0xfebff400-0xfebff4ff i3
rl2: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
miibus3: <MII bus> on rl2
rlphy2: <RealTek internal media interface> PHY 0 on miibus3
rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:30:18:a1:7f:eb
rl2: [MPSAFE]
rl2: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=40 ostat1=40
ata0: stat0=0x0c err=0x0c lsb=0x0c msb=0x0c
ata0: stat0=0x0f err=0x0f lsb=0x0f msb=0x0f
ata0: stat0=0x0f err=0x0f lsb=0x0f msb=0x0f
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x0f err=0x0f lsb=0x0f msb=0x0f
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x0f err=0x0f lsb=0x0f msb=0x0f
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat1=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: reset tp2 stat0=87 stat1=87 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port
0xc000-0xc007,0xbc00-0xbc03,0xb80
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xb400
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: Changing trigger for pin 4 to level
ioapic0: Changing polarity for pin 4 to low
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x83ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata1 failed to probe at port 0x170 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 83666108 hz
Timecounter "TSC" frequency 1673321840 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0dfab28
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
GEOM_LABEL: Label for provider md0 is ufsid/49fabd23737484d9.
ad4: 152627MB <WDC WD1600BEKT-00A25T0 01.01A01> at ata2-master SATA300
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
GEOM_LABEL: Label for provider ad4s1 is ext2fs//boot.
GEOM_LABEL: Label for provider ad4s3 is ext2fs//.
(probe0:umass-sim0:0:0:0): error 22
(probe0:umass-sim0:0:0:0): Unretryable Error
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
GEcd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <IOMEGA CDDVD482416E23-C 0037> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: cd present [1166896 x 2048 byte records]
OM: new disk cd0
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <IOMEGA CDDVD482416E23-C 0037> Removable CD-ROM SCSI-0 device
pass0: 40.000MB/s transfers
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 2
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 2
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 2
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 2
ioapic0: Assigning PCI IRQ 23 to local APIC 0
msi: Assigning MSI IRQ 256 to local APIC 2
scsi_cd.c::ioctl cmd=4400648b error=25
GEOM_LABEL: Label for provider cd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
GEOM_LABEL: Label ufsid/49fabd23737484d9 removed.
--
"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety." (Ben Franklin)
"The course of history shows that as a government grows, liberty
decreases." (Thomas Jefferson)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4CCEB4B7.6030006>