Date: Wed, 19 Oct 2011 20:25:45 -0500 From: "Michael D. Norwick" <mnorwick@centurytel.net> To: freebsd-questions@freebsd.org Subject: Re: Can't access a music CD (or any other media now) Message-ID: <4E9F7899.6070401@centurytel.net> In-Reply-To: <20111018195712.GA18773@freebsd.org> References: <4E924B4D.4050801@centurytel.net> <20111010063740.GA23603@orange.esperance-linux.co.uk> <4E92BF3C.8080807@centurytel.net> <20111010104450.GA28895@orange.esperance-linux.co.uk> <4E9616FD.5080404@centurytel.net> <447h49yed0.fsf@lowell-desk.lan> <4E9627A6.8000907@centurytel.net> <44vcrtohej.fsf@lowell-desk.lan> <20111013162524.GA75476@freebsd.org> <44wrc8iz09.fsf@be-well.ilk.org> <20111018195712.GA18773@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/18/11 14:57, Alexander Best wrote:
> On Thu Oct 13 11, Lowell Gilbert wrote:
>> Alexander Best<arundel@freebsd.org> writes:
>>
< snip >
Good Day;
It seems that I still cannot figure this out. No amount of searching
the docs or mailing lists has gotten me closer to a solution. I csup'd
the source tree again last night and built another kernel and world for;
*default release=cvs tag=RELENG_9
*default delete use-rel-suffix
/usr/src/sys/amd64/conf/KERNEL_101811 contains (among other things);
# ATA controllers
device ahci # AHCI-compatible SATA controllers
device ata # Legacy ATA/SATA controllers
options ATA_CAM # Handle legacy controllers with CAM
options ATA_STATIC_ID # Static device numbering
device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
# SCSI Controllers
# ATA/SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
/usr/src/UPDATING and /usr/src/sys/amd64/conf/NOTES did not seem to
contain anything applicable to this issue.
The buildkernel KERNCONF=KERNEL_101811 step resulted in;
$uname -a
FreeBSD ****.****.net 9.0-RC1 FreeBSD 9.0-RC1 #1: Wed Oct 19 05:37:43
CDT 2011 michael@****.****.net:/usr/obj/usr/src/sys/KERNEL_101811 amd64
and the following cd devices in /dev;
$ ls -l cd*
crw-rw-rw- 1 root operator 0, 105 Oct 19 19:08 cd0
lrwxr-xr-x 1 root wheel 8 Oct 19 19:08 cdrom -> /dev/cd0
No /dev/acd* devices but I would think that there are not supposed to be.
/etc/devfs.conf contains;
# Commonly used by many ports
#link acd0 cdrom
link /dev/cd0 cdrom
perm /dev/cd0 0660
# Allow a user in the wheel group to query the smb0 device
perm /dev/smb0 0660
# Allow members of group operator to cat things to the speaker
#own speaker root:operator
#perm speaker 0660
perm /dev/pass0 0660
perm /dev/xpt0 0660
perm /dev/pass1 0660
perm /dev/mdctl 0660
perm /dev/md0 0660
perm /dev/bpf0 0660
perm /dev/bpf1 0660
perm /dev/bpf2 0660
perm /dev/bpf3 0660
perm /dev/bpf4 0660
link /tmp shm
$ cat /boot/loader.conf
atapicam_load="YES"
hw.ata.atapi_dma=0
linux_load="YES"
snd_hda_load="YES"
$ cat /etc/rc.conf
hostname="****.****.net"
keymap=us.iso.kbd
ifconfig_bge0=" inet 192.168.1.22 netmask 255.255.255.0"
defaultrouter="192.168.1.1"
hald_enable="YES"
dbus_enable="YES"
gdm_enable="YES"
sshd_enable="YES"
linux_enable="YES"
abi_enable="YES"
sysctl_enable="YES"
ntpd_enable="YES"
powerd_enable="YES"
$dmesg (snipped somewhat)
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-L632H D300> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [26466 x 2048 byte records]
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 67 61 0 0 1 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: HARDWARE FAILURE asc:3e,2 (Timeout on
logical unit)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 67 61 0 0 1 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: HARDWARE FAILURE asc:3e,2 (Timeout on
logical unit)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 67 61 0 0 1 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: HARDWARE FAILURE asc:3e,2 (Timeout on
logical unit)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 67 61 0 0 1 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: HARDWARE FAILURE asc:3e,2 (Timeout on
logical unit)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 67 61 0 0 1 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: HARDWARE FAILURE asc:3e,2 (Timeout on
logical unit)
(cd0:ata0:0:0:0): cddone: got error 0x5 back
with a data CD in the drive during reboot.
Trying to manually mount the drive results in;
$ sudo mount_cd9660 /dev/cd0 /media/dvdrom
mount_cd9660: /dev/cd0: Invalid argument
$ cat /etc/fstab
# Device Mountpoint FStype Options Dump Pass#
proc /proc procfs rw 0 0
/dev/ada0p2 / ufs rw 1 1
/dev/ada0p3 none swap sw 0 0
/dev/ada0p4 /var ufs rw 2 2
/dev/ada0p5 /usr ufs rw 2 2
/dev/ada0p6 /home ufs rw 2 2
linproc /compat/linux/proc linprocfs rw 0 0
/dev/cd0 /media/dvdrom cd9660 rw,noauto 0 0
$ cdcontrol info
Starting track = 1, ending track = 1, TOC size = 18 bytes
track start duration block length type
-------------------------------------------------
1 0:02.00 5:52.66 0 26466 data
170 5:54.66 - 26466 - -
Before I recompiled the kernel, when I inserted a music CD, Gnome would
display a folder containing the *.wav files but I could not play them
(using the command line or not). Now I cannot even access a data CD.
Again, the machine is a Dell Latitude D630 laptop.
The livefs CD - FreeBSD 8.2 amd64 dated 05/14/2011 boots to the
sysinstall screen so i assume the drive is ok.
Thank You,
Michael
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E9F7899.6070401>