Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 6 Jun 2012 11:05:56 -0500
From:      Mark Felder <feld@feld.me>
To:        freebsd-usb@freebsd.org
Subject:   Re: usb power output issues
Message-ID:  <op.wfhob6s934t2sn@tech304>
In-Reply-To: <201206061758.32133.hselasky@c2i.net>
References:  <op.wfhm2uot34t2sn@tech304> <201206061758.32133.hselasky@c2i.net>

next in thread | previous in thread | raw e-mail | index | archive | help
------------mejFyPHOeK7wrsZk6mP0b4
Content-Type: text/plain; charset=utf-8; format=flowed; delsp=yes

On Wed, 06 Jun 2012 10:58:32 -0500, Hans Petter Selasky <hselasky@c2i.net>  
wrote:
>
> Hi,
>
> Can you try pressing CTRL+ALT+F1, then CTRL+ALT+F9. Sometimes I see  
> something
> similar, and switching back and forth between the console helps.
>

The keyboard goes *completely* dead, so even switching VTs like that isn't  
possible.

I worked around the issue by plugging in a powered USB hub. So currently  
if I plug in my keyboard directly, it won't work.

>
> You can try to get dmesg, and also run:
>
> usbconfig dump_device_desc dump_curr_config_desc
>
> If your device times out on the command above, something is wrong in  
> USB. Else
> it is a problem in the interaction with X11.

It doesn't appear to time out when I collect that info, and it can't be an  
X11 issue because I can kill X11 completely and the problem persists.

>
> FYI: CAPS-LOCK-LED and NUM-LOCK-LED are software controlled by the USB  
> stack.
>

I suspected as much.


See attached.

------------mejFyPHOeK7wrsZk6mP0b4
Content-Disposition: attachment; filename=dmesg.txt
Content-Type: text/plain; name=dmesg.txt
Content-Transfer-Encoding: quoted-printable

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #8 r235057: Sat May  5 09:59:32 CDT 2012
    root@tech304.office.supranet.net:/usr/obj/tank/svn/sys/GENERIC amd64
link_elf_obj: symbol ata_controlcmd undefined
KLD file atapicam.ko - could not finalize loading
CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (3093.04-MHz K8-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x206a7  Family =3D 6  Model =3D 2a  =
Stepping =3D 7
  Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=3D0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2=
,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE=
,OSXSAVE,AVX>
  AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=3D0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  =3D 8589934592 (8192 MB)
avail memory =3D 8192802816 (7813 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x0000000=
0CF7E4D40, using 32 (20110527/tbfadt-517)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \\_SB_.MEM2 - AE_AML_INVALID_RESOURCE_TYPE
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xe3000000-0xe3f=
fffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 =
on pci1
nvidia0: <GeForce 8400GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xe4080000-0xe4083fff irq 17 =
at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe4b40000-0xe4b403ff irq =
16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac1: <Intel Cougar Point HDA Controller> mem 0xe4b30000-0xe4b33fff irq =
22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port =
0x2000-0x20ff mem 0xe2b10000-0xe2b10fff,0xe2b00000-0xe2b03fff irq 16 at =
device 0.0 on pci4
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on =
miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, =
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT=
-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master=
, auto, auto-flow
re0: Ethernet address: d0:67:e5:17:e1:32
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe4b20000-0xe4b203ff irq =
17 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA300 controller> port 0x50d0-0x50d7,0x50c=
0-0x50c3,0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x509f,0x5080-0x508f irq 18 =
at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel Cougar Point SATA300 controller> port 0x5070-0x5077,0x506=
0-0x5063,0x5050-0x5057,0x5040-0x5043,0x5030-0x503f,0x5020-0x502f irq 18 =
at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
vboxdrv: fAsync=3D0 offMin=3D0x208 offMax=3D0x53c
hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Conexant CX20641 HDA CODEC> at cad 2 on hdac1
hdaa4: <Conexant CX20641 HDA CODEC Audio Function Group> at nid 1 on =
hdacc4
pcm4: <Conexant CX20641 HDA CODEC PCM (Analog 4ch/2.0)> at nid 28,31 and =
26 on hdaa4
pcm5: <Conexant CX20641 HDA CODEC PCM (Analog)> at nid 25 and 29,27 on =
hdaa4
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> =
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> =
on usbus1
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <ST3300831AS 3.03> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ata5 bus 0 scbus3 target 0 lun 0
ada1: <ST3300831AS 3.01> ATA-7 SATA 1.x device
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad10
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <vendor 0x1a40> at usbus0
uhub4: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> =
on usbus0
uhub4: MTT enabled
ugen1.3: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
uhub4: 4 ports with 4 removable, self powered
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GH70N A101> Removable CD-ROM SCSI-0 device=20
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes=
)
cd0: Attempt to query device size failed: NOT READY, Medium not present =
- tray closed
GEOM_MIRROR: Device mirror/swap launched (2/2).
GEOM_MIRROR: Device mirror/root launched (2/2).
Root mount waiting for: usbus0
ugen0.4: <Logitech> at usbus0
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on =
usbus0
kbd3 at ukbd1
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on =
usbus0
ums1: 16 buttons and [XYZT] coordinates ID=3D2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on =
usbus0
Trying to mount root from ufs:/dev/mirror/root [rw]...
ZFS filesystem version 5
ZFS storage pool version 28
vboxnet0: Ethernet address: 0a:00:27:00:00:00
re0: promiscuous mode enabled
ugen1.3: <Cypress> at usbus1 (disconnected)
ukbd0: at uhub3, port 3, addr 3 (disconnected)
ums0: at uhub3, port 3, addr 3 (disconnected)
ugen1.3: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
ugen1.4: <HTC> at usbus1
umass0: <HTC Android Phone, class 0/0, rev 2.00/2.27, addr 4> on usbus1
umass0:  SCSI over Bulk-Only; quirks =3D 0x0100
umass0:5:0:-1: Attached to scbus5
ugen1.4: <HTC> at usbus1 (disconnected)
umass0: at uhub3, port 4, addr 4 (disconnected)
ugen1.4: <HTC> at usbus1
umass0: <Mass Storage> on usbus1
umass0:  SCSI over Bulk-Only; quirks =3D 0x4100
umass0:5:0:-1: Attached to scbus5
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not =
present)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device=20
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ugen1.4: <HTC> at usbus1 (disconnected)
umass0: at uhub3, port 4, addr 4 (disconnected)
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
(da0:umass-sim0:0:0:0): removing device entry
ugen1.4: <HTC> at usbus1
umass0: <Mass Storage> on usbus1
umass0:  SCSI over Bulk-Only; quirks =3D 0x4100
umass0:5:0:-1: Attached to scbus5
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not =
present)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device=20
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ugen1.4: <HTC> at usbus1 (disconnected)
umass0: at uhub3, port 4, addr 4 (disconnected)
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
(da0:umass-sim0:0:0:0): removing device entry
ugen1.4: <HTC> at usbus1
umass0: <Mass Storage> on usbus1
umass0:  SCSI over Bulk-Only; quirks =3D 0x4100
umass0:5:0:-1: Attached to scbus5
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not =
present)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device=20
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ugen1.4: <HTC> at usbus1 (disconnected)
umass0: at uhub3, port 4, addr 4 (disconnected)
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
(da0:umass-sim0:0:0:0): removing device entry
ugen0.5: <www.zalman.com> at usbus0
umass0: <iODD2511> on usbus0
umass0:  SCSI over Bulk-Only; quirks =3D 0x0100
umass0:5:0:-1: Attached to scbus5
cd1 at umass-sim0 bus 0 scbus5 target 0 lun 0
cd1: <ZMVE Virtual CDRom 1.00> Removable CD-ROM SCSI-0 device=20
cd1: 40.000MB/s transfers
cd1: cd present [114272 x 2048 byte records]
ugen0.5: <www.zalman.com> at usbus0 (disconnected)
umass0: at uhub4, port 1, addr 5 (disconnected)
(cd1:umass-sim0:0:0:0): lost device
(cd1:umass-sim0:0:0:0): removing device entry
ugen0.5: <www.zalman.com> at usbus0
umass0: <iODD2511> on usbus0
umass0:  SCSI over Bulk-Only; quirks =3D 0x0100
umass0:5:0:-1: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <ZMVE Ext Hard Disk > Fixed Direct Access SCSI-4 device=20
da0: 40.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
ugen0.5: <www.zalman.com> at usbus0 (disconnected)
umass0: at uhub4, port 1, addr 5 (disconnected)
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
(da0:umass-sim0:0:0:0): removing device entry
linux: pid 98386 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 98455 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 98957 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 25326 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 25991 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 32033 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 32141 (npviewer.bin): syscall pipe2 not implemented
linux: pid 72578 (operapluginwrapper.): syscall pipe2 not implemented
pid 72578 (operapluginwrapper.), uid 1001: exited on signal 11 (core =
dumped)
re0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 done
All buffers synced.
GEOM_MIRROR: Device root: provider mirror/root destroyed.
GEOM_MIRROR: Device root destroyed.
GEOM_MIRROR: Device swap: provider mirror/swap destroyed.
GEOM_MIRROR: Device swap destroyed.
Uptime: 5d6h34m4s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x8087> at usbus0 (disconnected)
uhub2: at uhub0, port 1, addr 2 (disconnected)
ugen0.3: <vendor 0x1a40> at usbus0 (disconnected)
uhub4: at uhub2, port 2, addr 3 (disconnected)
ugen0.4: <Logitech> at usbus0 (disconnected)
ukbd1: at uhub4, port 2, addr 4 (disconnected)
ums1: at uhub4, port 2, addr 4 (disconnected)
uhid0: at uhub4, port 2, addr 4 (disconnected)
usbus0: Controller shutdown complete
usbus1: Controller shutdown
uhub1: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <vendor 0x8087> at usbus1 (disconnected)
uhub3: at uhub1, port 1, addr 2 (disconnected)
ugen1.3: <Cypress> at usbus1 (disconnected)
ukbd0: at uhub3, port 3, addr 3 (disconnected)
ums0: at uhub3, port 3, addr 3 (disconnected)
usbus1: Controller shutdown complete
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #4 r234571: Tue May 22 14:15:22 CDT 2012
    root@tech304.office.supranet.net:/usr/obj/usr/src/sys/GENERIC amd64
link_elf_obj: symbol ata_controlcmd undefined
KLD file atapicam.ko - could not finalize loading
CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (3093.04-MHz K8-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x206a7  Family =3D 6  Model =3D 2a  =
Stepping =3D 7
  Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=3D0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2=
,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE=
,OSXSAVE,AVX>
  AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=3D0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  =3D 8589934592 (8192 MB)
avail memory =3D 8192811008 (7813 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x0000000=
0CF7E4D40, using 32 (20110527/tbfadt-517)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \\_SB_.MEM2 - AE_AML_INVALID_RESOURCE_TYPE
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xe3000000-0xe3f=
fffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 =
on pci1
nvidia0: <GeForce 8400GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xe4080000-0xe4083fff irq 17 =
at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe4b40000-0xe4b403ff irq =
16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac1: <Intel Cougar Point HDA Controller> mem 0xe4b30000-0xe4b33fff irq =
22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port =
0x2000-0x20ff mem 0xe2b10000-0xe2b10fff,0xe2b00000-0xe2b03fff irq 16 at =
device 0.0 on pci4
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on =
miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, =
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT=
-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master=
, auto, auto-flow
re0: Ethernet address: d0:67:e5:17:e1:32
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe4b20000-0xe4b203ff irq =
17 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA300 controller> port 0x50d0-0x50d7,0x50c=
0-0x50c3,0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x509f,0x5080-0x508f irq 18 =
at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel Cougar Point SATA300 controller> port 0x5070-0x5077,0x506=
0-0x5063,0x5050-0x5057,0x5040-0x5043,0x5030-0x503f,0x5020-0x502f irq 18 =
at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
vboxdrv: fAsync=3D0 offMin=3D0x1fc offMax=3D0x6d4
hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT21x HDA CODEC Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT21x HDA CODEC PCM (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Conexant CX20641 HDA CODEC> at cad 2 on hdac1
hdaa4: <Conexant CX20641 HDA CODEC Audio Function Group> at nid 1 on =
hdacc4
pcm4: <Conexant CX20641 HDA CODEC PCM (Analog 4ch/2.0)> at nid 28,31 and =
26 on hdaa4
pcm5: <Conexant CX20641 HDA CODEC PCM (Analog)> at nid 25 and 29,27 on =
hdaa4
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> =
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> =
on usbus1
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <ST3300831AS 3.03> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ata5 bus 0 scbus3 target 0 lun 0
ada1: <ST3300831AS 3.01> ATA-7 SATA 1.x device
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad10
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 12082178 Hz quality 1000
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <vendor 0x1a40> at usbus0
uhub4: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> =
on usbus0
ugen1.3: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
uhub4: 4 ports with 4 removable, self powered
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GH70N A101> Removable CD-ROM SCSI-0 device=20
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes=
)
cd0: Attempt to query device size failed: NOT READY, Medium not present =
- tray closed
GEOM_MIRROR: Device mirror/swap launched (2/2).
GEOM_MIRROR: Device mirror/root launched (2/2).
Root mount waiting for: usbus0
ugen0.4: <Logitech> at usbus0
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on =
usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
kbd3 at ukbd1
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on =
usbus0
ums1: 16 buttons and [XYZT] coordinates ID=3D2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on =
usbus0
Trying to mount root from ufs:/dev/mirror/root [rw]...
ZFS filesystem version 5
ZFS storage pool version 28
vboxnet0: Ethernet address: 0a:00:27:00:00:00
re0: promiscuous mode enabled
linux: pid 1508 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 54488 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 54590 (npviewer.bin): syscall pipe2 not implemented
linux: pid 36115 (opera:libflashp): syscall pipe2 not implemented
linux: pid 36438 (opera:libflashp): syscall pipe2 not implemented
re0: promiscuous mode disabled
nvidia0: detached
nvidia0: <GeForce 8400GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
linux: pid 12060 (operapluginwrapper.): syscall pipe2 not implemented
re0: promiscuous mode enabled
re0: promiscuous mode disabled
nvidia0: detached
nvidia0: <GeForce 8400GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
re0: promiscuous mode enabled
linux: pid 23135 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 24818 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 37483 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 63220 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 63654 (operapluginwrapper.): syscall pipe2 not implemented
re0: promiscuous mode disabled
nvidia0: detached
nvidia0: <GeForce 8400GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: detached
Warning: memory type nvidia leaked memory on destroy (1 allocations, 64 =
bytes leaked).
nvidia0: <GeForce 8400GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
linux: pid 80403 (operapluginwrapper.): syscall pipe2 not implemented
re0: promiscuous mode enabled
linux: pid 62222 (operapluginwrapper.): syscall pipe2 not implemented
re0: promiscuous mode disabled
linux: pid 83101 (operapluginwrapper.): syscall pipe2 not implemented
re0: promiscuous mode enabled
linux: pid 96771 (operapluginwrapper.): syscall pipe2 not implemented
re0: promiscuous mode disabled
pid 26395 (VirtualBox), uid 1001: exited on signal 10
pid 26509 (VirtualBox), uid 1001: exited on signal 10
linux: pid 91293 (operapluginwrapper.): syscall pipe2 not implemented
pid 91293 (operapluginwrapper.), uid 1001: exited on signal 11 (core =
dumped)
linux: pid 28854 (npviewer.bin): syscall pipe2 not implemented
re0: promiscuous mode enabled
Limiting closed port RST response from 220 to 200 packets/sec
linux: pid 96010 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 2160 (operapluginwrapper.): syscall pipe2 not implemented
ugen1.4: <JetFlash> at usbus1
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> =
on usbus1
umass0:  SCSI over Bulk-Only; quirks =3D 0x4101
umass0:5:0:-1: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <JetFlash TS1GJFV30 8.07> Removable Direct Access SCSI-2 device=20
da0: 40.000MB/s transfers
da0: 975MB (1996800 512 byte sectors: 64H 32S/T 975C)
ugen1.4: <JetFlash> at usbus1 (disconnected)
umass0: at uhub3, port 4, addr 4 (disconnected)
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
(da0:umass-sim0:0:0:0): removing device entry
linux: pid 19767 (npviewer.bin): syscall pipe2 not implemented
linux: pid 21385 (npviewer.bin): syscall pipe2 not implemented
linux: pid 23420 (npviewer.bin): syscall pipe2 not implemented
linux: pid 24247 (operapluginwrapper.): syscall pipe2 not implemented
pid 29544 (xfce4-appfinder), uid 1001: exited on signal 11 (core dumped)
re0: promiscuous mode disabled
nvidia0: detached
Warning: memory type nvidia leaked memory on destroy (50 allocations, =
3200 bytes leaked).
nvidia0: <GeForce 8400GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
pid 38247 (operapluginwrapper.), uid 1001: exited on signal 11 (core =
dumped)
linux: pid 38290 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 93280 (npviewer.bin): syscall pipe2 not implemented
linux: pid 65794 (operapluginwrapper.): syscall pipe2 not implemented
linux: pid 51717 (npviewer.bin): syscall pipe2 not implemented
pid 88000 (xfce4-appfinder), uid 1001: exited on signal 11 (core dumped)
ugen1.3: <Cypress> at usbus1 (disconnected)
ukbd0: at uhub3, port 3, addr 3 (disconnected)
ums0: at uhub3, port 3, addr 3 (disconnected)
ugen1.3: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
ugen1.3: <Cypress> at usbus1 (disconnected)
ukbd0: at uhub3, port 3, addr 3 (disconnected)
ums0: at uhub3, port 3, addr 3 (disconnected)
ugen1.3: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
ugen1.4: <DELL> at usbus1
ukbd2: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 4> on =
usbus1
kbd4 at ukbd2
ugen1.3: <Cypress> at usbus1 (disconnected)
ukbd0: at uhub3, port 3, addr 3 (disconnected)
ums0: at uhub3, port 3, addr 3 (disconnected)
ugen1.4: <DELL> at usbus1 (disconnected)
ukbd2: at uhub3, port 4, addr 4 (disconnected)
ugen1.3: <DELL> at usbus1
ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 3> on =
usbus1
kbd2 at ukbd0
ugen1.3: <DELL> at usbus1 (disconnected)
ukbd0: at uhub3, port 3, addr 3 (disconnected)
ugen1.3: <Tripplite> at usbus1
ukbd0: <B015-000 R0.75 USB to PS2 adapter.> on usbus1
kbd2 at ukbd0
ums0: <B015-000 R0.75 USB to PS2 adapter.> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=3D0
ugen1.3: <Tripplite> at usbus1 (disconnected)
ukbd0: at uhub3, port 4, addr 3 (disconnected)
ums0: at uhub3, port 4, addr 3 (disconnected)
ugen1.3: <vendor 0x1a40> at usbus1
uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> =
on usbus1
uhub5: 7 ports with 7 removable, self powered
ugen1.4: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
ugen1.3: <vendor 0x1a40> at usbus1 (disconnected)
uhub5: at uhub3, port 3, addr 3 (disconnected)
ugen1.4: <Cypress> at usbus1 (disconnected)
ukbd0: at uhub5, port 5, addr 4 (disconnected)
ums0: at uhub5, port 5, addr 4 (disconnected)
ugen1.3: <vendor 0x1a40> at usbus1
uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> =
on usbus1
uhub5: 7 ports with 7 removable, self powered
ugen1.4: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
ugen0.3: <vendor 0x1a40> at usbus0 (disconnected)
uhub4: at uhub2, port 2, addr 3 (disconnected)
ugen0.4: <Logitech> at usbus0 (disconnected)
ukbd1: at uhub4, port 2, addr 4 (disconnected)
ums1: at uhub4, port 2, addr 4 (disconnected)
uhid0: at uhub4, port 2, addr 4 (disconnected)
ugen1.4: <Cypress> at usbus1 (disconnected)
ukbd0: at uhub5, port 5, addr 4 (disconnected)
ums0: at uhub5, port 5, addr 4 (disconnected)
ugen1.4: <Cypress> at usbus1
ukbd0: <EndPoint1 Interrupt> on usbus1
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=3D1
ugen1.5: <vendor 0x1a40> at usbus1
uhub4: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 5> =
on usbus1
uhub4: 4 ports with 4 removable, self powered
ugen1.6: <Logitech> at usbus1
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 6> on =
usbus1
kbd3 at ukbd1
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 6> on =
usbus1
ums1: 16 buttons and [XYZT] coordinates ID=3D2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 6> on =
usbus1
ugen1.6: <Logitech> at usbus1 (disconnected)
ukbd1: at uhub4, port 2, addr 6 (disconnected)
ums1: at uhub4, port 2, addr 6 (disconnected)
uhid0: at uhub4, port 2, addr 6 (disconnected)
ugen1.6: <Logitech> at usbus1
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 6> on =
usbus1
kbd3 at ukbd1
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 6> on =
usbus1
ums1: 16 buttons and [XYZT] coordinates ID=3D2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 6> on =
usbus1
linux: pid 99519 (operapluginwrapper.): syscall pipe2 not implemented

------------mejFyPHOeK7wrsZk6mP0b4
Content-Disposition: attachment; filename=usbconfig.txt
Content-Type: text/plain; name=usbconfig.txt
Content-Transfer-Encoding: quoted-printable

ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH =
(480Mbps) pwr=3DSAVE

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0200=20
  bDeviceClass =3D 0x0009=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0001=20
  bMaxPacketSize0 =3D 0x0040=20
  idVendor =3D 0x0000=20
  idProduct =3D 0x0000=20
  bcdDevice =3D 0x0100=20
  iManufacturer =3D 0x0001  <Intel>
  iProduct =3D 0x0002  <EHCI root HUB>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x0019=20
    bNumInterfaces =3D 0x0001=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0000  <no string>
    bmAttributes =3D 0x0040=20
    bMaxPower =3D 0x0000=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0000=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0008=20
        bInterval =3D 0x00ff=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20



ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=3D0 md=3DHOST spd=3DHIGH =
(480Mbps) pwr=3DSAVE

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0200=20
  bDeviceClass =3D 0x0009=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0001=20
  bMaxPacketSize0 =3D 0x0040=20
  idVendor =3D 0x0000=20
  idProduct =3D 0x0000=20
  bcdDevice =3D 0x0100=20
  iManufacturer =3D 0x0001  <Intel>
  iProduct =3D 0x0002  <EHCI root HUB>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x0019=20
    bNumInterfaces =3D 0x0001=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0000  <no string>
    bmAttributes =3D 0x0040=20
    bMaxPower =3D 0x0000=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0000=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0008=20
        bInterval =3D 0x00ff=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20



ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=3D0 md=3DHOST =
spd=3DHIGH (480Mbps) pwr=3DSAVE

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0200=20
  bDeviceClass =3D 0x0009=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0001=20
  bMaxPacketSize0 =3D 0x0040=20
  idVendor =3D 0x8087=20
  idProduct =3D 0x0024=20
  bcdDevice =3D 0x0000=20
  iManufacturer =3D 0x0000  <no string>
  iProduct =3D 0x0000  <no string>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x0019=20
    bNumInterfaces =3D 0x0001=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0000  <no string>
    bmAttributes =3D 0x00e0=20
    bMaxPower =3D 0x0000=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0000=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0001=20
        bInterval =3D 0x000c=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20



ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=3D0 md=3DHOST =
spd=3DHIGH (480Mbps) pwr=3DSAVE

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0200=20
  bDeviceClass =3D 0x0009=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0001=20
  bMaxPacketSize0 =3D 0x0040=20
  idVendor =3D 0x8087=20
  idProduct =3D 0x0024=20
  bcdDevice =3D 0x0000=20
  iManufacturer =3D 0x0000  <no string>
  iProduct =3D 0x0000  <no string>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x0019=20
    bNumInterfaces =3D 0x0001=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0000  <no string>
    bmAttributes =3D 0x00e0=20
    bMaxPower =3D 0x0000=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0000=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0001=20
        bInterval =3D 0x000c=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20



ugen1.3: <USB 2.0 Hub MTT vendor 0x1a40> at usbus1, cfg=3D0 md=3DHOST =
spd=3DHIGH (480Mbps) pwr=3DSAVE

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0200=20
  bDeviceClass =3D 0x0009=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0002=20
  bMaxPacketSize0 =3D 0x0040=20
  idVendor =3D 0x1a40=20
  idProduct =3D 0x0201=20
  bcdDevice =3D 0x0100=20
  iManufacturer =3D 0x0000  <no string>
  iProduct =3D 0x0001  <USB 2.0 Hub [MTT]>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x0029=20
    bNumInterfaces =3D 0x0001=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0000  <no string>
    bmAttributes =3D 0x00e0=20
    bMaxPower =3D 0x0032=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0001=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0001=20
        bInterval =3D 0x000c=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20


    Interface 0 Alt 1
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0001=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0002=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0001=20
        bInterval =3D 0x000c=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20



ugen1.4: <Cypress USB Keyboard  PS2 Mouse Cypress> at usbus1, cfg=3D0 =
md=3DHOST spd=3DLOW (1.5Mbps) pwr=3DON

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0110=20
  bDeviceClass =3D 0x0000=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0000=20
  bMaxPacketSize0 =3D 0x0008=20
  idVendor =3D 0x04b4=20
  idProduct =3D 0x0101=20
  bcdDevice =3D 0x0001=20
  iManufacturer =3D 0x0001  <Cypress>
  iProduct =3D 0x0002  <Cypress USB Keyboard / PS2 Mouse>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x003b=20
    bNumInterfaces =3D 0x0002=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0004  <HID Keyboard / Mouse>
    bmAttributes =3D 0x00a0=20
    bMaxPower =3D 0x0032=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0003=20
      bInterfaceSubClass =3D 0x0001=20
      bInterfaceProtocol =3D 0x0001=20
      iInterface =3D 0x0005  <EndPoint1 Interrupt>

      Additional Descriptor

      bLength =3D 0x09
      bDescriptorType =3D 0x21
      bDescriptorSubType =3D 0x00
       RAW dump:=20
       0x00 | 0x09, 0x21, 0x00, 0x01, 0x00, 0x01, 0x22, 0x3f,=20
       0x08 | 0x00

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0008=20
        bInterval =3D 0x000a=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20


    Interface 1
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0001=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0003=20
      bInterfaceSubClass =3D 0x0001=20
      bInterfaceProtocol =3D 0x0002=20
      iInterface =3D 0x0006  <EP2 Interrupt>

      Additional Descriptor

      bLength =3D 0x09
      bDescriptorType =3D 0x21
      bDescriptorSubType =3D 0x00
       RAW dump:=20
       0x00 | 0x09, 0x21, 0x00, 0x01, 0x00, 0x01, 0x22, 0x7c,=20
       0x08 | 0x00

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0082  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0005=20
        bInterval =3D 0x000a=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20



ugen1.5: <USB 2.0 Hub MTT vendor 0x1a40> at usbus1, cfg=3D0 md=3DHOST =
spd=3DHIGH (480Mbps) pwr=3DSAVE

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0200=20
  bDeviceClass =3D 0x0009=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0002=20
  bMaxPacketSize0 =3D 0x0040=20
  idVendor =3D 0x1a40=20
  idProduct =3D 0x0101=20
  bcdDevice =3D 0x0100=20
  iManufacturer =3D 0x0000  <no string>
  iProduct =3D 0x0001  <USB 2.0 Hub [MTT]>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x0029=20
    bNumInterfaces =3D 0x0001=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0000  <no string>
    bmAttributes =3D 0x00e0=20
    bMaxPower =3D 0x0032=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0001=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0001=20
        bInterval =3D 0x000c=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20


    Interface 0 Alt 1
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0001=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0009=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0002=20
      iInterface =3D 0x0000  <no string>

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0001=20
        bInterval =3D 0x000c=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20



ugen1.6: <USB Receiver Logitech> at usbus1, cfg=3D0 md=3DHOST spd=3DFULL =
(12Mbps) pwr=3DON

  bLength =3D 0x0012=20
  bDescriptorType =3D 0x0001=20
  bcdUSB =3D 0x0200=20
  bDeviceClass =3D 0x0000=20
  bDeviceSubClass =3D 0x0000=20
  bDeviceProtocol =3D 0x0000=20
  bMaxPacketSize0 =3D 0x0008=20
  idVendor =3D 0x046d=20
  idProduct =3D 0xc52b=20
  bcdDevice =3D 0x1201=20
  iManufacturer =3D 0x0001  <Logitech>
  iProduct =3D 0x0002  <USB Receiver>
  iSerialNumber =3D 0x0000  <no string>
  bNumConfigurations =3D 0x0001=20


 Configuration index 0

    bLength =3D 0x0009=20
    bDescriptorType =3D 0x0002=20
    wTotalLength =3D 0x0054=20
    bNumInterfaces =3D 0x0003=20
    bConfigurationValue =3D 0x0001=20
    iConfiguration =3D 0x0004  <RQR12.01_B0019>
    bmAttributes =3D 0x00a0=20
    bMaxPower =3D 0x0031=20

    Interface 0
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0000=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0003=20
      bInterfaceSubClass =3D 0x0001=20
      bInterfaceProtocol =3D 0x0001=20
      iInterface =3D 0x0000  <no string>

      Additional Descriptor

      bLength =3D 0x09
      bDescriptorType =3D 0x21
      bDescriptorSubType =3D 0x11
       RAW dump:=20
       0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x3b,=20
       0x08 | 0x00

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0081  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0008=20
        bInterval =3D 0x0008=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20


    Interface 1
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0001=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0003=20
      bInterfaceSubClass =3D 0x0001=20
      bInterfaceProtocol =3D 0x0002=20
      iInterface =3D 0x0000  <no string>

      Additional Descriptor

      bLength =3D 0x09
      bDescriptorType =3D 0x21
      bDescriptorSubType =3D 0x11
       RAW dump:=20
       0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x94,=20
       0x08 | 0x00

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0082  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0008=20
        bInterval =3D 0x0002=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20


    Interface 2
      bLength =3D 0x0009=20
      bDescriptorType =3D 0x0004=20
      bInterfaceNumber =3D 0x0002=20
      bAlternateSetting =3D 0x0000=20
      bNumEndpoints =3D 0x0001=20
      bInterfaceClass =3D 0x0003=20
      bInterfaceSubClass =3D 0x0000=20
      bInterfaceProtocol =3D 0x0000=20
      iInterface =3D 0x0000  <no string>

      Additional Descriptor

      bLength =3D 0x09
      bDescriptorType =3D 0x21
      bDescriptorSubType =3D 0x11
       RAW dump:=20
       0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x62,=20
       0x08 | 0x00

     Endpoint 0
        bLength =3D 0x0007=20
        bDescriptorType =3D 0x0005=20
        bEndpointAddress =3D 0x0083  <IN>
        bmAttributes =3D 0x0003  <INTERRUPT>
        wMaxPacketSize =3D 0x0020=20
        bInterval =3D 0x0002=20
        bRefresh =3D 0x0000=20
        bSynchAddress =3D 0x0000=20




------------mejFyPHOeK7wrsZk6mP0b4--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.wfhob6s934t2sn>