Date: Fri, 29 Jun 2012 11:07:52 +0200 From: vermaden <vermaden@interia.pl> To: Matthias Apitz <guru@unixarea.de> Cc: freebsd-questions@freebsd.org, mike@sentex.net Subject: Re: umodem/ppp/3g stopped working after update from 9.0-RELEASE to 9-STABLE Message-ID: <stgdtfcimdgarzfteqhr@upms> In-Reply-To: <20120629073009.GA1321@tiny.Sisis.de> References: <orbevfsodiahrtleagth@uazf> <20120628185809.GA1107@tiny.Sisis.de> <kbwzpfzegdfzkxyrhfmo@rnfz> <20120629073009.GA1321@tiny.Sisis.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks You, now I understand how badly it was broken (the config of course), I confirm that using the config You send everything works like a charm now, for the record, here is mine complete config: | default: | set log Phase Chat LCP IPCP CCP tun command |=20 | 3g: | set device /dev/cuaU0 | set speed 921600 |=20 | set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ | \"\" AT OK-AT-OK \ | AT+CFUN=3D1 OK \ | AT+COPS=3D0 OK \ | AT+CGDCONT=3D1,\\\"IP\\\",\\\"www.plusgsm.pl\\\" OK \ | \dATDT\\T TIMEOUT 40 CONNECT" |=20 | set logout "ABORT BUSY ABORT ERROR TIMEOUT 30 \"\" +++ATH O ATH OK" |=20 | set phone *99\# | set timeout 300 | set ifaddr 10.64.64.64/0 10.64.64.64/0 255.255.255.255 0.0.0.0 | add default HISADDR | enable dns | disable ipv6cp I am going to send update to the PR to close it ;) Thanks again, vermaden "Matthias Apitz" <guru@unixarea.de> pisze: > El d=C3=ADa Friday, June 29, 2012 a las 08:02:17AM +0200, vermaden escrib= i=C3=B3: >=20 > > > I said this already: the /etc/ppp/ppp.conf file you are > > > using is completely broken and the log matches this; > > >=20 > > > what should these AT cmds do in the section of 3g: > > >=20 > > > 3g: > > > set device /dev/cuaU0 > > > set speed 38400 > > > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0 > > > add default HISADDR > > > term > > > AT+CFUN=3D1 > > > AT+CGDCONT=3D1,"IP","www.plusgsm.pl" > > > ATD*99# > > >=20 > > > matthias > >=20 > > I did not knew that its broken, I used the '3g' > > profile to connect, like that: # ppp -ddial 3g > >=20 > > It worked very well without errors on 9.0-RELEASE > > and it stopped working after the update to the > > 9-STABLE, what is broken there? >=20 > I can't imagine that 9-STABLE delivers such a broken file (already > because the "www.plusgsm.pl" entry in your file); I do not know how you > did the update and if maybe this is the result of some kind of broken > merging; I'm attaching the original file out of SVM (CURRENT) and mine > which have a working entry 'umts'; try to rebuild from both a workin one > by hand; >=20 > matthias >=20 > --=20 > Matthias Apitz > e - w http://www.unixarea.de/ > UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370) > UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5 >=20 --=20 ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?stgdtfcimdgarzfteqhr>