Date: Sun, 16 Feb 2014 17:37:10 +0900 From: "Lundberg, Johannes" <johannes@brilliantservice.co.jp> To: Glen Barber <gjb@freebsd.org> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Raspberry Pi and BeagleBone images available on FreeBSD FTP mirrors Message-ID: <CAASDrV=wbfJT2N8%2B1HHs4E7kc7kZyKMuUpS_tua34of8Oy0Ogg@mail.gmail.com> In-Reply-To: <20140213152802.GH1667@glenbarber.us> References: <20140129181803.GI1827@glenbarber.us> <6620C833-9D56-4367-AA4D-D78D4BCA2D40@neville-neil.com> <20140211161142.GA1665@glenbarber.us> <20140211211746.28beee52@cuisine.seix> <20140211203645.GB1650@glenbarber.us> <CAASDrVkpLf_j==i54B_SpaDWJRB5XVzT3ammw0anjpNi%2BQsv3Q@mail.gmail.com> <20140212010827.GA1671@glenbarber.us> <CAASDrV=_Gq9W%2BApkLhNEcjof%2BUGhChoydt1V0QLcH_3ijwg1Bg@mail.gmail.com> <20140212012025.GB1671@glenbarber.us> <20140213152802.GH1667@glenbarber.us>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Glen
This is what I get when booting your image (burnt to 4 GB ScanDisk Ultra HC
card)
loader> boot -v
Using DTB compiled into kernel.
Kernel entry at 0x80200100...
Kernel args: -v
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r261642: Wed Feb 12 22:58:33 UTC 2014
root@grind.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/PANDABOARD arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0757000.
CPU: Cortex A9-r2 rev 10 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:1 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 1073741824 (1024 MB)
Physical memory chunk(s):
0x80000000 - 0x801fffff, 2048 KBytes (512 pages)
0x80888000 - 0xbeb6afff, 1018764 KBytes (254691 pages)
avail memory = 1041924096 (993 MB)
Static device mappings:
0x48000000 - 0x48ffffff mapped at VA 0xfef00000
0x4a000000 - 0x4affffff mapped at VA 0xfdf00000
Texas Instruments OMAP4460 Processor, Revision ES1.1
random device not loaded; using insecure entropy
null: <null device, zero device>
openfirm: <Open Firmware control device>
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
mem: <memory>
nfslock: pseudo-device
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem
0x48241000-0x48241fff,0x48240100-0x482401ff on simplebus0
gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b sc->nirqs 160
omap4_prcm0: <TI OMAP Power, Reset and Clock Management> mem
0x4a306000-0x4a307fff,0x4a004000-0x4a004fff,0x4a008000-0x4a00ffff on
simplebus0
l2cache0: <PL310 L2 cache controller> mem 0x48242000-0x48242fff irq 32 on
simplebus0
l2cache0: Part number: 0x3, release: 0x7
l2cache0: L2 Cache: 1024KB/32B 16 ways
l2cache0: Early BRESP response: disabled
l2cache0: Instruction prefetch: disabled
l2cache0: Data prefetch: enabled
l2cache0: Non-secure interrupt control: enabled
l2cache0: Non-secure lockdown: enabled
l2cache0: Share override: disabled
l2cache0: Double linefil: disabled
l2cache0: Instruction prefetch: disabled
l2cache0: Data prefetch: enabled
l2cache0: Double linefill on WRAP request: disabled
l2cache0: Prefetch drop: disabled
l2cache0: Incr double Linefill: disabled
l2cache0: Not same ID on exclusive sequence: disabled
l2cache0: Prefetch offset: 5
mp_tmr0: <ARM Generic MPCore Timers> mem
0x48240200-0x482402ff,0x48240600-0x482406ff irq 27,29 on simplebus0
Timecounter "ARM MPCore Timecounter" frequency 12607573 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 12607573 Hz quality 1000
??uart0: <Non-standard ns8250 class UART with FIFOs> mem
0x48020000-0x48020fff irq 106 on simplebus0
uart0: console (115384,n,8,1)
uart0: fast interrupt
ti_scm0: <TI Control Module> mem 0x4a100000-0x4a100fff on simplebus0
ti_scm0: setting internal 4 for usbb1_ulpiphy_stp
ti_scm0: setting internal 10c for usbb1_ulpiphy_clk
ti_scm0: setting internal 10c for usbb1_ulpiphy_dir
ti_scm0: setting internal 10c for usbb1_ulpiphy_nxt
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat0
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat1
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat2
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat3
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat4
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat5
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat6
ti_scm0: setting internal 10c for usbb1_ulpiphy_dat7
gpio0: <TI General Purpose I/O (GPIO)> mem
0x4a310000-0x4a310fff,0x48055000-0x48055fff,0x48057000-0x48057fff,0x48059000-0x48059fff,0x4805b000-0x4805bfff,0x4805d000-0x4805dfff
irq 61,62,63,64,65,66 on simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
ehci0: <TI OMAP USB 2.0 controller> mem
0x4a064c00-0x4a064cff,0x4a064000-0x4a0646ff,0x4a062000-0x4a062fff irq 109
on simplebus0
ehci0: Starting TI EHCI USB Controller
ehci0: UHH revision 0x50700100
ehci0: OMAP_UHH_SYSCONFIG: 0x00000014
ehci0: UHH setup done, uhh_hostconfig=0x8000001c
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
iichb0: <TI I2C Controller> mem 0x48070000-0x480700ff irq 88 on simplebus0
iichb0: I2C revision 4.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
ti_sdma0: <TI sDMA Controller> mem 0x4a056000-0x4a056fff irq 44,45,46,47 on
simplebus0
ti_sdma0: sDMA revision 00010900
ti_mmchs0: <TI MMC/SD/SDIO High Speed Interface> mem 0x4809c000-0x4809cfff
irq 115 on simplebus0
mmc0: <MMC/SD bus> on ti_mmchs0
Timecounters tick every 10.000 msec
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Texas Instruments> at usbus0
uhub0: <Texas Instruments EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
on usbus0
mmc0: Probing bus
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x40ff8000)
mmc0: Current OCR: 0x00ff8000
mmc0: Probing cards
mmc0: New card detected (CID 0353445355303447801c3557c400c9f5)
uhub0: 3 ports with 3 removable, self powered
mmc0: New card detected (CSD 400e00325b5900001d8a7f800a4040b9)
mmc0: Card at relative address 0xe624 added:
mmc0: card: SDHC SU04G 8.0 SN 473257924 MFG 09/2012 by 3 SD
mmc0: bus: 4bit, 50MHz, high speed timing
mmc0: memory: 7744512 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 25.000MHz
mmcsd0: 4GB <SDHC SU04G 8.0 SN 473257924 MFG 09/2012 by 3 SD> at mmc0
25.0MHz/4bit/1-block
random: unblocking device.
GEOM:ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on
usbus0
uhub1: MTT enabled
new disk mmcsd0
mmc0: setting bus width to 4 bits
GEOM_PART: partition 1 is not aligned on 4194304 bytes
GEOM_PART: partition 2 is not aligned on 4194304 bytes
uhub1: 5 ports with 4 removable, self powered
GEOM_PART: partition 1 is not aligned on 4194304 bytes
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
Root mount waiting for: usbus0
Trying to mount root from ufs:/dev/mmcsd0s2 [rw,noatime]...
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: bpf attached
ue0: Ethernet address: d2:20:2a:b7:50:c7
warning: no time-of-day clock registered, system time will not be set
accurately
start_init: trying /sbin/init
Spurious interrupt detected [0x000003ff]
Spurious interrupt detected [0x000003ff]
Spurious interrupt detected [0x000003ff]
Spurious interrupt detected [0x000003ff]
and so on...
--
Johannes Lundberg
BRILLIANTSERVICE CO., LTD.
On Fri, Feb 14, 2014 at 12:28 AM, Glen Barber <gjb@freebsd.org> wrote:
> On Tue, Feb 11, 2014 at 08:20:25PM -0500, Glen Barber wrote:
> > On Wed, Feb 12, 2014 at 10:10:04AM +0900, Lundberg, Johannes wrote:
> > > Thanks! Will Pandaboard also show up here soon?
> > >
> >
> > Yes.
> >
>
> Can you test the image located here? If it works for you, PANDABOARD
> will be included in the next set of snapshot builds.
>
> http://people.freebsd.org/~gjb/PANDABOARD/
>
> Glen
>
>
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
$BHkL)J];}$K$D$$$F!'$3$NEE;R%a!<%k$O!"L>08?M$KAw?.$7$?$b$N$G$"$j!"HkF?FC8"$NBP>]$H$J$k>pJs$r4^$s$G$$$^$9!#(B
$B$b$7!"L>08?M0J30$NJ}$,<u?.$5$l$?>l9g!"$3$N%a!<%k$NGK4~!"$*$h$S$3$N%a!<%k$K4X$9$k0l@Z$N3+<(!"(B
$BJ#<L!"G[I[!"$=$NB>$NMxMQ!"$^$?$O5-:\FbMF$K4p$E$/$$$+$J$k9TF0$b$5$l$J$$$h$&$*4j$$?=$7>e$2$^$9!#(B
---
CONFIDENTIALITY NOTE: The information in this email is confidential
and intended solely for the addressee.
Disclosure, copying, distribution or any other action of use of this
email by person other than intended recipient, is prohibited.
If you are not the intended recipient and have received this email in
error, please destroy the original message.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAASDrV=wbfJT2N8%2B1HHs4E7kc7kZyKMuUpS_tua34of8Oy0Ogg>