Date: Thu, 06 Nov 2014 01:20:47 +0000 From: Steven Hartland <killing@multiplay.co.uk> To: freebsd-stable@freebsd.org Subject: Re: 10.1 RC4 r273903 - zpool scrub on ssd mirror - ahci command timeout Message-ID: <545ACCEF.5000300@multiplay.co.uk> In-Reply-To: <20141106012739.509b96b5@orwell> References: <20141106003240.344dedf6@orwell> <545AB64F.1060502@multiplay.co.uk> <20141106012739.509b96b5@orwell>
next in thread | previous in thread | raw e-mail | index | archive | help
Try recabling and re-seating, if it still happens try to identify if its the disk or backplane by moving it in the chassis. We had a machine here recently where it was backplane issue and simply replacing it fixed the issue. On 06/11/2014 00:27, Kai Gallasch wrote: > Am Wed, 05 Nov 2014 23:44:15 +0000 > schrieb Steven Hartland <killing@multiplay.co.uk>: > >> Looks like a HW issue, how is it connected to the controller and what >> is the controller? > It's a SUN X2270 M1 server with 4 SATA connected disks. > > The (2.5") SSD drives are inside SUN 3.5" disk carriers and are sitting > on top of a 2.5" to 3.5" converter - like this one here > http://goo.gl/yBfS1V > > > dmesg.out: > > > Copyright (c) 1992-2014 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.1-RC4 #0 r273903: Fri Oct 31 15:32:22 CET 2014 > kgal@beltwaybandit.free.de:/usr/obj/usr/src/sys/X2270-10 amd64 > FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 > CPU: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz (2266.80-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x106a5 Family = 0x6 Model = 0x1a Stepping = 5 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID > TSC: P-state invariant, performance statistics > real memory = 51539607552 (49152 MB) > avail memory = 50000900096 (47684 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <040910 APIC1030> > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs > FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 16 > cpu1 (AP): APIC ID: 17 > cpu2 (AP): APIC ID: 18 > cpu3 (AP): APIC ID: 19 > cpu4 (AP): APIC ID: 20 > cpu5 (AP): APIC ID: 21 > cpu6 (AP): APIC ID: 22 > cpu7 (AP): APIC ID: 23 > cpu8 (AP): APIC ID: 0 > cpu9 (AP): APIC ID: 1 > cpu10 (AP): APIC ID: 2 > cpu11 (AP): APIC ID: 3 > cpu12 (AP): APIC ID: 4 > cpu13 (AP): APIC ID: 5 > cpu14 (AP): APIC ID: 6 > cpu15 (AP): APIC ID: 7 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > random: <Software, Yarrow> initialized > module_register_init: MOD_LOAD (vesa, 0xffffffff8085c590, 0) error 19 > kbd1 at kbdmux0 > cryptosoft0: <software crypto> on motherboard > acpi0: <040910 XSDT1030> on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, bff00000 (3) failed > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > cpu8: <ACPI CPU> on acpi0 > cpu9: <ACPI CPU> on acpi0 > cpu10: <ACPI CPU> on acpi0 > cpu11: <ACPI CPU> on acpi0 > cpu12: <ACPI CPU> on acpi0 > cpu13: <ACPI CPU> on acpi0 > cpu14: <ACPI CPU> on acpi0 > cpu15: <ACPI CPU> on acpi0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 350 > Event timer "HPET1" frequency 14318180 Hz quality 340 > Event timer "HPET2" frequency 14318180 Hz quality 340 > Event timer "HPET3" frequency 14318180 Hz quality 340 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci4: <ACPI PCI bus> on pcib1 > igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xec00-0xec1f mem 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 40 at device 0.0 on pci4 > igb0: Using MSIX interrupts with 5 vectors > igb0: Ethernet address: 00:14:4f:ca:a9:00 > igb0: Bound queue 0 to cpu 0 > igb0: Bound queue 1 to cpu 1 > igb0: Bound queue 2 to cpu 2 > igb0: Bound queue 3 to cpu 3 > igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xe880-0xe89f mem 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbe3c000-0xfbe3ffff irq 28 at device 0.1 on pci4 > igb1: Using MSIX interrupts with 5 vectors > igb1: Ethernet address: 00:14:4f:ca:a9:01 > igb1: Bound queue 0 to cpu 4 > igb1: Bound queue 1 to cpu 5 > igb1: Bound queue 2 to cpu 6 > igb1: Bound queue 3 to cpu 7 > pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 > pci2: <ACPI PCI bus> on pcib3 > pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) > pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) > pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) > pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) > uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0 > uhci0: LegSup = 0x2f00 > usbus0 on uhci0 > uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb480-0xb49f irq 21 at device 26.1 on pci0 > uhci1: LegSup = 0x2f00 > usbus1 on uhci1 > uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xb400-0xb41f irq 19 at device 26.2 on pci0 > uhci2: LegSup = 0x2f00 > usbus2 on uhci2 > ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbdf4000-0xfbdf43ff irq 18 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc000-0xc01f irq 23 at device 29.0 on pci0 > uhci3: LegSup = 0x2f00 > usbus4 on uhci3 > uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xbc00-0xbc1f irq 19 at device 29.1 on pci0 > uhci4: LegSup = 0x2f00 > usbus5 on uhci4 > uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb880-0xb89f irq 18 at device 29.2 on pci0 > uhci5: LegSup = 0x2f00 > usbus6 on uhci5 > ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbdf6000-0xfbdf63ff irq 23 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib4 > vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfb000000-0xfb7fffff,0xfafe0000-0xfaffffff irq 16 at device 5.0 on pci1 > vgapci0: Boot video device > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel ICH10 AHCI SATA controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc41f mem 0xfbdfa000-0xfbdfa7ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > ahciem0: <AHCI enclosure management bridge> on ahci0 > acpi_button0: <Power Button> on acpi0 > ipmi0: <IPMI System Interface> port 0xca2,0xca6 on acpi0 > ipmi0: KCS mode found at io 0xca2 on acpi > qpi0: <QPI system bus> on motherboard > pcib5: <QPI Host-PCI bridge> pcibus 255 on qpi0 > pci255: <PCI bus> on pcib5 > pcib6: <QPI Host-PCI bridge> pcibus 254 on qpi0 > pci254: <PCI bus> on pcib6 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: CGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff irq 4 on isa0 > uart0: console (115200,n,8,1) > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > coretemp2: <CPU On-Die Thermal Sensors> on cpu2 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > coretemp3: <CPU On-Die Thermal Sensors> on cpu3 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > coretemp4: <CPU On-Die Thermal Sensors> on cpu4 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > p4tcc4: <CPU Frequency Thermal Control> on cpu4 > coretemp5: <CPU On-Die Thermal Sensors> on cpu5 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > p4tcc5: <CPU Frequency Thermal Control> on cpu5 > coretemp6: <CPU On-Die Thermal Sensors> on cpu6 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > p4tcc6: <CPU Frequency Thermal Control> on cpu6 > coretemp7: <CPU On-Die Thermal Sensors> on cpu7 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > p4tcc7: <CPU Frequency Thermal Control> on cpu7 > coretemp8: <CPU On-Die Thermal Sensors> on cpu8 > est8: <Enhanced SpeedStep Frequency Control> on cpu8 > p4tcc8: <CPU Frequency Thermal Control> on cpu8 > coretemp9: <CPU On-Die Thermal Sensors> on cpu9 > est9: <Enhanced SpeedStep Frequency Control> on cpu9 > p4tcc9: <CPU Frequency Thermal Control> on cpu9 > coretemp10: <CPU On-Die Thermal Sensors> on cpu10 > est10: <Enhanced SpeedStep Frequency Control> on cpu10 > p4tcc10: <CPU Frequency Thermal Control> on cpu10 > coretemp11: <CPU On-Die Thermal Sensors> on cpu11 > est11: <Enhanced SpeedStep Frequency Control> on cpu11 > p4tcc11: <CPU Frequency Thermal Control> on cpu11 > coretemp12: <CPU On-Die Thermal Sensors> on cpu12 > est12: <Enhanced SpeedStep Frequency Control> on cpu12 > p4tcc12: <CPU Frequency Thermal Control> on cpu12 > coretemp13: <CPU On-Die Thermal Sensors> on cpu13 > est13: <Enhanced SpeedStep Frequency Control> on cpu13 > p4tcc13: <CPU Frequency Thermal Control> on cpu13 > coretemp14: <CPU On-Die Thermal Sensors> on cpu14 > est14: <Enhanced SpeedStep Frequency Control> on cpu14 > p4tcc14: <CPU Frequency Thermal Control> on cpu14 > coretemp15: <CPU On-Die Thermal Sensors> on cpu15 > est15: <Enhanced SpeedStep Frequency Control> on cpu15 > p4tcc15: <CPU Frequency Thermal Control> on cpu15 > random: unblocking device. > usbus0: 12Mbps Full Speed USB v1.0 > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > usbus1: 12Mbps Full Speed USB v1.0 > ugen0.1: <Intel> at usbus0 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 480Mbps High Speed USB v2.0 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <Intel> at usbus3 > uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 > ugen4.1: <Intel> at usbus4 > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1: <Intel> at usbus5 > uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 480Mbps High Speed USB v2.0 > ugen6.1: <Intel> at usbus6 > uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen7.1: <Intel> at usbus7 > uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > ipmi0: IPMI device rev. 1, firmware rev. 3.00, version 2.0 > uhub0: 2 ports with 2 removable, self powered > ipmi0: Number of channels 5 > ipmi0: Attached watchdog > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > uhub1: 2 ports with 2 removable, self powered > ada0: <HITACHI HUA7250SBSUN500G 0944JWRUMF GK6OAC5A> ATA-7uhub2: 2 ports with 2 removable, self powered > SATA 2.x device > ada0: Serial Number GTA460P6GWRUMF > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > uhub4: 2 ports with 2 removable, self powered > ada1: <HITACHI HUA7250SBSUN500G 0911JS4H0F GK6OAC5A> ATA-7uhub5: 2 ports with 2 removable, self powered > SATA 2.x device > ada1: Serial Number GTF402P6GS4H0F > ada1: 300.000MB/s transfersuhub6: 2 ports with 2 removable, self powered > (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad6 > ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 > ada2: <Samsung SSD 850 PRO 512GB EXM01B6Q> ATA-9 SATA 3.x device > ada2: Serial Number S1SXNSAFA06834H > ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) > ada2: Command Queueing enabled > ada2: 488386MB (1000215216 512 byte sectors: 16H 63S/T 16383C) > ada2: Previously was known as ad8 > ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 > ada3: <Samsung SSD 850 PRO 512GB EXM01B6Q> ATA-9 SATA 3.x device > ada3: Serial Number S1SXNSAFA06835A > ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) > ada3: Command Queueing enabled > ada3: 488386MB (1000215216 512 byte sectors: 16H 63S/T 16383C) > ada3: Previously was known as ad10 > ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 > ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device > ses0: SEMB SES Device > GEOM_MIRROR: Device mirror/swap launched (2/2). > SMP: AP CPU #1 Launched! > SMP: AP CPU #8 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #9 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #14 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #10 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #7 Launched! > SMP: AP CPU #13 Launched! > SMP: AP CPU #12 Launched! > SMP: AP CPU #15 Launched! > SMP: AP CPU #11 Launched! > SMP: AP CPU #4 Launched! > Timecounter "TSC-low" frequency 1133397512 Hz quality 1000 > Root mount waiting for: usbus7 usbus3 > Root mount waiting for: usbus7 usbus3 > uhub3: 6 ports with 6 removable, self powered > uhub7: 6 ports with 6 removable, self powered > Root mount waiting for: usbus7 usbus3 > ugen3.2: <American Megatrends Inc.> at usbus3 > usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) > Root mount waiting for: usbus7 > ugen7.2: <JetFlash> at usbus7 > umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 2> on usbus7 > umass0: SCSI over Bulk-Only; quirks = 0x0100 > umass0:7:0:-1: Attached to scbus7 > da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 > da0: <JetFlash Transcend 4GB 1100> Removable Direct Access SCSI-4 device > da0: Serial Number 82L68FGM1BTVJHR0 > da0: 40.000MB/s transfers > da0: 3861MB (7907328 512 byte sectors: 255H 63S/T 492C) > da0: quirks=0x12<NO_6_BYTE,NO_RC16> > ugen2.2: <American Megatrends Inc.> at usbus2 > ukbd0: <Keyboard Interface> on usbus2 > Trying to mount root from zfs:rpool/ROOT/r273903-10.1 []... > kbd2 at ukbd0 > ums0: <Mouse Interface> on usbus2 > ums0: 3 buttons and [XY] coordinates ID=0 > ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4 > kbd3 at ukbd1 > ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4 > ums1: 5 buttons and [XYZ] coordinates ID=1 > ugen4.2: <vendor 0x04d9> at usbus4 (disconnected) > ukbd1: at uhub4, port 2, addr 2 (disconnected) > ums1: at uhub4, port 2, addr 2 (disconnected) > ugen4.2: <vendor 0x04d9> at usbus4 > ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4 > kbd3 at ukbd1 > ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus4 > ums1: 5 buttons and [XYZ] coordinates ID=1 > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?545ACCEF.5000300>