Date: Sat, 17 Aug 2019 17:22:18 -0500 From: Jeffrey Bowers <khantroll@gmail.com> To: freebsd-arm <freebsd-arm@freebsd.org> Cc: =?UTF-8?Q?S=C3=B8ren_Schmidt?= <soren.schmidt@gmail.com> Subject: Re: Espressobin anyone ? Message-ID: <CAAkMUSXsgxP_fOJdfks%2Bd35MnyoXf1GfPO%2BC-YmTK3TpKDH7gA@mail.gmail.com> In-Reply-To: <20190817210822.8920656bad0855b554883cf2@bidouilliste.com> References: <E73AFF5D-43CA-41A7-BDBA-ADEF2D342479@deepcore.dk> <CAPv3WKeCRWy65LPeeJiisPtaz=LePpVYLDAi2cj%2B2TQR=r09YA@mail.gmail.com> <1547777156.662147.1565798461515.JavaMail.zimbra@perftech.com> <0E42E605-477E-4E65-810E-BD3A8CDE2C80@gmail.com> <973015183.1067498.1565890674099.JavaMail.zimbra@perftech.com> <BD3710D7-EB87-4BD0-9CDE-E55B9412ED87@gmail.com> <20190815210311.1035f64b003e2bc85fa47ca8@bidouilliste.com> <B3AFA483-4BE4-4BC6-BCC1-4BD58A8E554C@gmail.com> <20190815233755.893e485f40ccacd79cdb3d96@bidouilliste.com> <78F5029D-A0F5-42F2-8191-07EB3A68C87B@gmail.com> <20190816152454.4e54ab5c276a543c120d909a@bidouilliste.com> <20190816171037.f808fbaba2369f179de36397@bidouilliste.com> <20190816191230.508f07f27fac21479a6716d9@bidouilliste.com> <20190816225826.ce31e8f968021944f64cb67c@bidouilliste.com> <AB07E67F-5A5E-4B5A-9D2C-6EDD4E9B478A@gmail.com> <20190817153053.5592b15b8a42982fda0fc123@bidouilliste.com> <9749945A-FDAD-47E0-947A-FA62138C2F83@gmail.com> <20190817210822.8920656bad0855b554883cf2@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! I've got a new one :) I'm trying to do an svn checkout to fix the pkg problem, but it tells me it can't write to a to a temp folder because there is no room left on the device. However, FreeBSD partition is 29GB. It's never also never the same file in TMP that it can't write to. Here is a screenshot of the issue, along with the output of gpart: [image: image.png] Any ideas? Thanks! On Sat, Aug 17, 2019 at 2:08 PM Emmanuel Vadot <manu@bidouilliste.com> wrote: > On Sat, 17 Aug 2019 17:14:36 +0200 > S=C3=B8ren Schmidt <soren.schmidt@gmail.com> wrote: > > > HI > > > > Well, I have a whole forrest of tree?s here, but the error posted here > was on a clean checkout. > > > > Anyhow, with the latest changes to -stable and the two RF_SHAREABLE > patches from -current all works. > > I've reverted the commits, see > https://github.com/evadot/freebsd/commits/a37x0_gpio for a better way > to deal with this issue. > I'm waiting for mmel@ as he wrote the syscon_get_default_handle part. > > > It would be nice with the etherswitch changes as well so VLAN tagging > etc was standard. > > > > -S=C3=B8ren > > > > PS: given up on bottom & inline popsting, top posting is all the rage > now (yeah I miss elm etc :) ) > > > > > On 17 Aug 2019, at 15.30, Emmanuel Vadot <manu@bidouilliste.com> > wrote: > > > > > > On Sat, 17 Aug 2019 11:07:22 +0200 > > > S=C3=B8ren Schmidt <soren.schmidt@gmail.com <mailto:soren.schmidt@gma= il.com>> > wrote: > > > > > >> Hi Emmunuel > > >> > > >> Yes the 3720 gpio driver I already back ported long ago, its needed, > I?m happy its now part of std stable 12! > > > > > > Would have been nice of you to say that you were not running a clean > > > tree. > > > > > >> My issue seems to be the inclusion of the phy_usb driver, if I leave > that out, I?m back to normal.. > > > > > > What make you think this is this driver ? What works/doesn't work > > > with it ? could you provide logs. > > > > > >> I?ll have have another go at the latest -stable sources during the > weekend and see how it goes. > > >> > > >> Thanks for looking into this, with a little cooperation we?ll get > this solved for the greater good.. > > >> > > >> -S=C3=B8ren > > > > > > P.S. Please stop top posting, it's really hard to read the conversati= on > > > > > >>> On 16 Aug 2019, at 22.58, Emmanuel Vadot <manu@bidouilliste.com> > wrote: > > >>> > > >>> On Fri, 16 Aug 2019 19:12:30 +0200 > > >>> Emmanuel Vadot <manu@bidouilliste.com <mailto:manu@bidouilliste.com= >> > wrote: > > >>> > > >>>> On Fri, 16 Aug 2019 17:10:37 +0200 > > >>>> Emmanuel Vadot <manu@bidouilliste.com> wrote: > > >>>> > > >>>>> On Fri, 16 Aug 2019 15:24:54 +0200 > > >>>>> Emmanuel Vadot <manu@bidouilliste.com> wrote: > > >>>>> > > >>>>>> On Fri, 16 Aug 2019 07:28:59 +0200 > > >>>>>> S=C3=B8ren Schmidt <soren.schmidt@gmail.com> wrote: > > >>>>>> > > >>>>>>> Hi > > >>>>>>> > > >>>>>>> Very simple, reverting sys/gnu/dts to what was before 350595 > (actually 350592). > > >>>>>>> Thats what we have svn for ? > > >>>>>> > > >>>>>> If I asked how it was to have the svn command that you used, I > want to > > >>>>>> make sure that you didn't revert anything else, like do you have > > >>>>>> r350596 and r350628 ? > > >>>>>> > > >>>>>>> That does make my bananapi work again, no other changes just a > recompiled kernel. > > >>>>>> > > >>>>>> That + copying the dtb to the fat32 partition ? > > >>>>>> > > >>>>>> Can you post the dtb somewhere. > > >>>>>> > > >>>>>>> However it does not bring the Espressobin back to life, thats > something in one of the ~30 other files that changed between those two > revisions. > > >>>>>> > > >>>>>> What Linux version of DTS are you using then ? The ones that wer= e > in > > >>>>>> stable/12 when it was branched (4.18) or a later revision ? > > >>>>> > > >>>>> So I think that I've found the problem on the Espressobin. > > >>>>> I think that the problem comes from the simple-mfd driver that I'= ve > > >>>>> mfc in r350600. > > >>>>> The pinctrl/gpio controller compatible is > > >>>>> "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd" and it > attaches > > >>>>> at BUS_PASS_INTERRUPT while the simple_mfd driver attaches at > > >>>>> BUS_PASS_BUS (so earlier) which means that no gpio controller wil= l > be > > >>>>> available for sdhci to detect the card. > > >>>>> > > >>>>> If someone with a non-working espressobin could post a full verbo= se > > >>>>> boot log that would help me confirming that this is the case. > > >>>>> I'll try to find a solution on how to solve this problem. > > >>>> > > >>>> So this wasn't the problem but I've found it, see r351129 and > r351130 > > >>>> > > >>>> SD card now work again in HEAD, I'll have a look at stable later > next > > >>>> week. > > >>> > > >>> I've did a quick test and I've MFC r348880, r348882 and r349596, th= e > > >>> two other commits needed to be mfc'ed are the one I did today on > head, > > >>> I'll do that next week. > > >>> With them sdcard is working again on stable/12 > > >>> > > >>>>>>> -S=C3=B8ren > > >>>>>>> > > >>>>>>>> On 15 Aug 2019, at 23.37, Emmanuel Vadot <manu@bidouilliste.co= m> > wrote: > > >>>>>>>> > > >>>>>>>> On Thu, 15 Aug 2019 21:56:23 +0200 > > >>>>>>>> S=C3=B8ren Schmidt <soren.schmidt@gmail.com> wrote: > > >>>>>>>> > > >>>>>>>>> > > >>>>>>>>> Well, I don?t care where you are from and what color you have > :) > > >>>>>>>>> > > >>>>>>>>> Now, if I update my stable12 sources to r350595 the bananapi > breaks, if revert sys/gnu/dts it works again, go figure.. > > >>>>>>>> > > >>>>>>>> Reverting to what ? and how ? > > >>>>>>>> > > >>>>>>>> Because I've just test 12-stable and I have the problem that > I've said > > >>>>>>>> in my previous mail so setting hw.regulator.disable_unused=3D0= is > the > > >>>>>>>> work around. > > >>>>>>>> The problem is in twsi not in the DTS so I'm curious how > reverting > > >>>>>>>> only the dts fixes this problem. > > >>>>>>>> > > >>>>>>>>> The r351099 fix is already like that in -stable, and not part > of the problem. > > >>>>>>>>> > > >>>>>>>>> -S=C3=B8ren > > >>>>>>>> > > >>>>>>>>>> On 15 Aug 2019, at 21.03, Emmanuel Vadot < > manu@bidouilliste.com> wrote: > > >>>>>>>>>> > > >>>>>>>>>> On Thu, 15 Aug 2019 19:48:54 +0200 > > >>>>>>>>>> S=C3=B8ren Schmidt <soren.schmidt@gmail.com> wrote: > > >>>>>>>>>> > > >>>>>>>>>>> Hi Mit! > > >>>>>>>>>>> > > >>>>>>>>>>> Right, I suspected that, 12-stable broke many embedded > systems between r350592 and r350595 where all the latest and greatest DTS > files was pulled in, I guess the same holds for -current. > > >>>>>>>>>>> > > >>>>>>>>>>> -S=C3=B8ren > > >>>>>>>>>> > > >>>>>>>>>> Mhm it's fun that you think that DTS import is the source of > all your > > >>>>>>>>>> problems, I get it, it's easy to blame the French guy that > bulk import > > >>>>>>>>>> the DTS, he surely don't know what he is doing. > > >>>>>>>>>> Anyway, two problems were raised in this thread : > > >>>>>>>>>> > > >>>>>>>>>> 1) BananaPi (A20) doesn't boot > > >>>>>>>>>> 2) Espressobin sd support is broken > > >>>>>>>>>> > > >>>>>>>>>> I've just looked at the BananaPi problem today, I've fixed a > first > > >>>>>>>>>> problem in r351099. > > >>>>>>>>>> The main problem is that when we disable the unused > regulators we hang > > >>>>>>>>>> when trying to disabling ldo3. It's weird because the board > doesn't use > > >>>>>>>>>> LDO3 (which is why we are disabling it, it's unused). The > problem is in > > >>>>>>>>>> twsi I think as only leaving the part in axp209 that read th= e > > >>>>>>>>>> voltage register value make FreeBSD hang. > > >>>>>>>>>> I'll have a proper look later, in the meantime you can set > > >>>>>>>>>> hw.regulator.disable_unused=3D0 > > >>>>>>>>>> in /boot/loader.conf > > >>>>>>>>>> This isn't a DTS problem. > > >>>>>>>>>> > > >>>>>>>>>> For Espressobin I haven't found any thing related to SD in > the DTS > > >>>>>>>>>> updates since the import, the only things slighly related ar= e > mmc and > > >>>>>>>>>> sdio. > > >>>>>>>>>> So if someone could find which DTS import broke this I can > have a look. > > >>>>>>>>>> > > >>>>>>>>>>> > > >>>>>>>>>>>> On 15 Aug 2019, at 19.37, Mit Matelske <mit@pt.net> wrote: > > >>>>>>>>>>>> > > >>>>>>>>>>>> Yeah, that was the problem. I went back to r348882 and > everything worked out of the box. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks again for the hand holding! > > >>>>>>>>>>>> > > >>>>>>>>>>>> Mit > > >>>>>>>>>>>> > > >>>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com <mailt= o: > soren.schmidt@gmail.com>> > > >>>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>> > > >>>>>>>>>>>> Cc: "Marcin Wojtas" <mw@semihalf.com <mailto: > mw@semihalf.com>>, "freebsd-arm" <freebsd-arm@freebsd.org <mailto: > freebsd-arm@freebsd.org>> > > >>>>>>>>>>>> Sent: Wednesday, August 14, 2019 1:33:04 PM > > >>>>>>>>>>>> Subject: Re: Espressobin anyone ? > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> It might simply be broken in -current (again). > > >>>>>>>>>>>> > > >>>>>>>>>>>> I just updated my stable12 tree and I pulled in new .dts > files for just about anything? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Needless to say, it broke the Espressobin?s SD support, it > now fails just like yours.. > > >>>>>>>>>>>> > > >>>>>>>>>>>> It also broke allwinner builds and what not, so I?m just > going back in time again :) > > >>>>>>>>>>>> > > >>>>>>>>>>>> I wonder why there is this overwhelming need to import > stuff that breaks things right, left and center in a -stable branch ? > > >>>>>>>>>>>> That would have earned you the pointy hat back when?. > > >>>>>>>>>>>> > > >>>>>>>>>>>> -S=C3=B8ren > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> On 14 Aug 2019, at 18.01, Mit Matelske <mit@pt.net <mailto= : > mit@pt.net>> wrote: > > >>>>>>>>>>>> > > >>>>>>>>>>>> Marcin- > > >>>>>>>>>>>> > > >>>>>>>>>>>> Sorry I didn't reply yesterday. I didn't have any luck > with that either. I tried a lot of permutations. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Not saying for 100% it doesn't work, but I couldn't get it > to work! > > >>>>>>>>>>>> > > >>>>>>>>>>>> Mit > > >>>>>>>>>>>> > > >>>>>>>>>>>> From: "Marcin Wojtas" <mw@semihalf.com <mailto: > mw@semihalf.com>> > > >>>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>> > > >>>>>>>>>>>> Cc: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com <mailto: > soren.schmidt@gmail.com>>, "freebsd-arm" <freebsd-arm@freebsd.org <mailto= : > freebsd-arm@freebsd.org>> > > >>>>>>>>>>>> Sent: Wednesday, August 14, 2019 10:41:04 AM > > >>>>>>>>>>>> Subject: Re: Espressobin anyone ? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Hi Mit, > > >>>>>>>>>>>> Since you are using the latest 13-current, could you pleas= e > try if passing rootdev via u-boot bootargs (please see my previous email) > works for you without the loader modification? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Best regards, > > >>>>>>>>>>>> Marcin > > >>>>>>>>>>>> > > >>>>>>>>>>>> ?r., 14 sie 2019 o 16:29 Mit Matelske <mit@pt.net <mailto: > mit@pt.net>> napisa?(a): > > >>>>>>>>>>>> Soren- > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks for the info. I'll grab a couple more SD cards at > lunch. This one is a new Samsung 32GB. I'll also try putting the change= s > into 12 and see if that helps. I'm using the latest 13-current. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Again, appreciate the hand holding! > > >>>>>>>>>>>> > > >>>>>>>>>>>> Mit > > >>>>>>>>>>>> > > >>>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com <mailt= o: > soren.schmidt@gmail.com>> > > >>>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>> > > >>>>>>>>>>>> Cc: "Marcin Wojtas" <mw@semihalf.com <mailto: > mw@semihalf.com>>, "freebsd-arm" <freebsd-arm@freebsd.org <mailto: > freebsd-arm@freebsd.org>> > > >>>>>>>>>>>> Sent: Wednesday, August 14, 2019 2:30:31 AM > > >>>>>>>>>>>> Subject: Re: Espressobin anyone ? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Hi Mit > > >>>>>>>>>>>> Hmm, from your earlier posted dmesgs it looks like the SD > card is not getting detected properly.. > > >>>>>>>>>>>> > > >>>>>>>>>>>> I get this output: > > >>>>>>>>>>>> > > >>>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem > 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1 > > >>>>>>>>>>>> mmc0: <MMC/SD bus> on sdhci_xenon0 > > >>>>>>>>>>>> ?snip? > > >>>>>>>>>>>> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 > PH> at mmc0 50.0MHz/4bit/65535-block > > >>>>>>>>>>>> > > >>>>>>>>>>>> The problem you see was fixed for me by r348882, maybe it > got broken later, I havn?t backported the later changes.. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Have you tried another SD card ? I have found 2 of mine > that the espressobin doesn?t like, but works fine with bananapi and > friends... > > >>>>>>>>>>>> > > >>>>>>>>>>>> -S=C3=B8ren > > >>>>>>>>>>>> > > >>>>>>>>>>>> On 13 Aug 2019, at 23.30, Mit Matelske <mit@pt.net <mailto= : > mit@pt.net>> wrote: > > >>>>>>>>>>>> > > >>>>>>>>>>>> Soren- > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks for the code snippet! That will fix one of the > problems. > > >>>>>>>>>>>> > > >>>>>>>>>>>> I still can't mount my filesystem, though. I think I'm > doing something really simple, wrong. I believe I'm running the latest > code and added some printfs to show the kernel setting the regulator: > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> usbus1 on ehci0 > > >>>>>>>>>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus= 1 > > >>>>>>>>>>>> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) = =3D > 19 > > >>>>>>>>>>>> sdhci_xenon0: vqmmc-supply regulator found > > >>>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem > 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1 > > >>>>>>>>>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 o= n > simplebus1 > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> Could there be a problem with how I am setting up my > filesystem? I've tried both freebsd-ufs and freebsd as the type, with no > luck. A gpart listing of my SD card: > > >>>>>>>>>>>> > > >>>>>>>>>>>> root@fbl:~ # gpart list da3 > > >>>>>>>>>>>> Geom name: da3 > > >>>>>>>>>>>> modified: false > > >>>>>>>>>>>> state: OK > > >>>>>>>>>>>> fwheads: 255 > > >>>>>>>>>>>> fwsectors: 63 > > >>>>>>>>>>>> last: 62521335 > > >>>>>>>>>>>> first: 3 > > >>>>>>>>>>>> entries: 4 > > >>>>>>>>>>>> scheme: GPT > > >>>>>>>>>>>> Providers: > > >>>>>>>>>>>> 1. Name: da3p1 > > >>>>>>>>>>>> Mediasize: 41943040 (40M) > > >>>>>>>>>>>> Sectorsize: 512 > > >>>>>>>>>>>> Stripesize: 0 > > >>>>>>>>>>>> Stripeoffset: 1536 > > >>>>>>>>>>>> Mode: r0w0e0 > > >>>>>>>>>>>> efimedia: > HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000) > > >>>>>>>>>>>> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0 > > >>>>>>>>>>>> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b > > >>>>>>>>>>>> label: (null) > > >>>>>>>>>>>> length: 41943040 > > >>>>>>>>>>>> offset: 1536 > > >>>>>>>>>>>> type: efi > > >>>>>>>>>>>> index: 1 > > >>>>>>>>>>>> end: 81922 > > >>>>>>>>>>>> start: 3 > > >>>>>>>>>>>> 2. Name: da3p2 > > >>>>>>>>>>>> Mediasize: 31968979456 (30G) > > >>>>>>>>>>>> Sectorsize: 512 > > >>>>>>>>>>>> Stripesize: 0 > > >>>>>>>>>>>> Stripeoffset: 41944576 > > >>>>>>>>>>>> Mode: r0w0e0 > > >>>>>>>>>>>> efimedia: > HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5) > > >>>>>>>>>>>> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0 > > >>>>>>>>>>>> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b > > >>>>>>>>>>>> label: (null) > > >>>>>>>>>>>> length: 31968979456 > > >>>>>>>>>>>> offset: 41944576 > > >>>>>>>>>>>> type: freebsd-ufs > > >>>>>>>>>>>> index: 2 > > >>>>>>>>>>>> end: 62521335 > > >>>>>>>>>>>> start: 81923 > > >>>>>>>>>>>> Consumers: > > >>>>>>>>>>>> 1. Name: da3 > > >>>>>>>>>>>> Mediasize: 32010928128 (30G) > > >>>>>>>>>>>> Sectorsize: 512 > > >>>>>>>>>>>> Mode: r0w0e0 > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks!! > > >>>>>>>>>>>> > > >>>>>>>>>>>> Mit > > >>>>>>>>>>>> > > >>>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com <mailt= o: > soren.schmidt@gmail.com>> > > >>>>>>>>>>>> To: "Marcin Wojtas" <mw@semihalf.com <mailto: > mw@semihalf.com>> > > >>>>>>>>>>>> Cc: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>, > "freebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>> > > >>>>>>>>>>>> Sent: Tuesday, August 13, 2019 12:55:09 PM > > >>>>>>>>>>>> Subject: Re: Espressobin anyone ? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Hi > > >>>>>>>>>>>> That doesn?t seen to work on the espressobin, or least I > can?t get it to pick it up. > > >>>>>>>>>>>> > > >>>>>>>>>>>> I use this patch as a workaround: > > >>>>>>>>>>>> > > >>>>>>>>>>>> Index: main.c > > >>>>>>>>>>>> > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > >>>>>>>>>>>> --- main.c (revision 350496) > > >>>>>>>>>>>> +++ main.c (working copy) > > >>>>>>>>>>>> @@ -463,6 +462,13 @@ > > >>>>>>>>>>>> int rv; > > >>>>>>>>>>>> char *rootdev; > > >>>>>>>>>>>> > > >>>>>>>>>>>> +#if defined(__aarch64__) > > >>>>>>>>>>>> + /* SOS HACK in rootdev, at least Espressobin gets thi= s > wrong */ > > >>>>>>>>>>>> + printf("Setting currdev hack\n"); > > >>>>>>>>>>>> + set_currdev("disk0p2"); > > >>>>>>>>>>>> + return (0); > > >>>>>>>>>>>> +#endif > > >>>>>>>>>>>> + > > >>>>>>>>>>>> /* > > >>>>>>>>>>>> * First choice: if rootdev is already set, use that, eve= n > if > > >>>>>>>>>>>> * it's wrong. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Its not pretty but it does the job until I get time to loo= k > into why bootargs aren?t passed / won?t stick, probably something I havn?= t > backported to my -stable12 sources yet... > > >>>>>>>>>>>> > > >>>>>>>>>>>> -S=C3=B8ren > > >>>>>>>>>>>> > > >>>>>>>>>>>> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw@semihalf.com > <mailto:mw@semihalf.com>> wrote: > > >>>>>>>>>>>> > > >>>>>>>>>>>> Hi, > > >>>>>>>>>>>> > > >>>>>>>>>>>> Not sure if it's what you are looking for, but in order to > autoboot, I > > >>>>>>>>>>>> simply pass 'rootdev=3DdiskXpY' in the bootargs variable. > Here's example from > > >>>>>>>>>>>> A3720-DB (same should work on EspressoBin): > > >>>>>>>>>>>> > > >>>>>>>>>>>> Marvell>> set bootargs "rootdev=3Ddisk1p1";usb reset; fatl= oad > usb 0:1 > > >>>>>>>>>>>> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 > ${kernel_addr} > > >>>>>>>>>>>> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr} > > >>>>>>>>>>>> resetting USB... > > >>>>>>>>>>>> USB0: Register 2000104 NbrPorts 2 > > >>>>>>>>>>>> Starting the controller > > >>>>>>>>>>>> USB XHCI 1.00 > > >>>>>>>>>>>> USB1: USB EHCI 1.00 > > >>>>>>>>>>>> - ______ ____ _____ _____ > > >>>>>>>>>>>> | ____| | _ \ / ____| __ \ > > >>>>>>>>>>>> | |___ _ __ ___ ___ | |_) | (___ | | | | > > >>>>>>>>>>>> | ___| '__/ _ \/ _ \| _ < \___ \| | | | > > >>>>>>>>>>>> | | | | | __/ __/| |_) |____) | |__| | > > >>>>>>>>>>>> | | | | | | || | | | > > >>>>>>>>>>>> |_| |_| \___|\___||____/|_____/|_____/ > > >>>>>>>>>>>> ``` > > >>>>>>>>>>>> ` > > >>>>>>>>>>>> ????????????Welcome to FreeBSD????????????? s` > `.....---.......--.``` > > >>>>>>>>>>>> -/ > > >>>>>>>>>>>> ? ? +o .--` > /y:` > > >>>>>>>>>>>> +. > > >>>>>>>>>>>> ? 1. Boot Multi user [Enter] ? yo`:. > :o > > >>>>>>>>>>>> `+- > > >>>>>>>>>>>> ? 2. Boot Single user ? y/ > -/` -o/ > > >>>>>>>>>>>> ? 3. Escape to loader prompt ? .- > > >>>>>>>>>>>> ::/sy+:. > > >>>>>>>>>>>> ? 4. Reboot ? / > `-- > > >>>>>>>>>>>> / > > >>>>>>>>>>>> ? ? `: > > >>>>>>>>>>>> :` > > >>>>>>>>>>>> ? Options: ? `: > > >>>>>>>>>>>> :` > > >>>>>>>>>>>> ? 5. Kernel: default/kernel (1 of 1) ? / > > >>>>>>>>>>>> / > > >>>>>>>>>>>> ? 6. Boot Options ? .- > > >>>>>>>>>>>> -. > > >>>>>>>>>>>> ? ? -- > -. > > >>>>>>>>>>>> ? ? `:` > `:` > > >>>>>>>>>>>> ? ? .-- > `--. > > >>>>>>>>>>>> ??????????????????????????????????????????? > .---.....----. > > >>>>>>>>>>>> Autoboot in 9 seconds, hit [Enter] to boot or any other ke= y > to stop > > >>>>>>>>>>>> > > >>>>>>>>>>>> Loading kernel... > > >>>>>>>>>>>> /boot/kernel/kernel text=3D0x95047c data=3D0x1919d0+0x84aa= 94 > > >>>>>>>>>>>> syms=3D[0x8+0x13aaa8+0x8+0x12610d] > > >>>>>>>>>>>> Loading configured modules... > > >>>>>>>>>>>> can't find '/boot/entropy' > > >>>>>>>>>>>> Using DTB provided by EFI at 0x8000000. > > >>>>>>>>>>>> ---<<BOOT>>--- > > >>>>>>>>>>>> KDB: debugger backends: ddb > > >>>>>>>>>>>> KDB: current backend: ddb > > >>>>>>>>>>>> Copyright (c) 1992-2019 The FreeBSD Project. > > >>>>>>>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, > 1992, 1993, 1994 > > >>>>>>>>>>>> The Regents of the University of California. All rights > reserved. > > >>>>>>>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundatio= n. > > >>>>>>>>>>>> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) > GENERIC arm64 > > >>>>>>>>>>>> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365= ) > (based on LLVM > > >>>>>>>>>>>> 8.0.0) > > >>>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performanc= e. > > >>>>>>>>>>>> VT: init without driver. > > >>>>>>>>>>>> Starting CPU 1 (1) > > >>>>>>>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > >>>>>>>>>>>> [...] > > >>>>>>>>>>>> > > >>>>>>>>>>>> Best regards, > > >>>>>>>>>>>> Marcin > > >>>>>>>>>>>> > > >>>>>>>>>>>> pon., 12 sie 2019 o 23:14 Mit Matelske <mit@pt.net <mailto= : > mit@pt.net>> napisa?(a): > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> Soren- > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks for the quick response. I built this kernel with > revision 350924. > > >>>>>>>>>>>> I'll dig into whats going on in the morning. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Mind posting your diff for your loader.efi? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks again! > > >>>>>>>>>>>> > > >>>>>>>>>>>> Mit > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> ----- Original Message ----- > > >>>>>>>>>>>> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com <mailt= o: > soren.schmidt@gmail.com>> > > >>>>>>>>>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>> > > >>>>>>>>>>>> Cc: "tscho" <johannes@t-beutel.com <mailto: > johannes@t-beutel.com>>, "freebsd-arm" < > > >>>>>>>>>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>> > > >>>>>>>>>>>> Sent: Monday, August 12, 2019 3:49:48 PM > > >>>>>>>>>>>> Subject: Re: Espressobin anyone ? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Hi > > >>>>>>>>>>>> > > >>>>>>>>>>>> Looks like your sources may be too old, you need to be at > least at r348882 > > >>>>>>>>>>>> to get the fix for the SD card VCC regulator. > > >>>>>>>>>>>> > > >>>>>>>>>>>> That change fixed it for me backported to 12-stable... > > >>>>>>>>>>>> > > >>>>>>>>>>>> The currdev problem still exists, I have it hardwired in m= y > loader for > > >>>>>>>>>>>> aarch64 :) > > >>>>>>>>>>>> > > >>>>>>>>>>>> -S=C3=B8ren > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> On 12 Aug 2019, at 21.06, Mit Matelske <mit@pt.net <mailto= : > mit@pt.net>> wrote: > > >>>>>>>>>>>> > > >>>>>>>>>>>> I'm having a couple little hiccups booting this board > also. One has > > >>>>>>>>>>>> been commented on already, that I can't get the loader to > automatically > > >>>>>>>>>>>> start loading the kernel on "disk0p2"... > > >>>>>>>>>>>> > > >>>>>>>>>>>> The second, is that the kernel can't find the SD card afte= r > booting so > > >>>>>>>>>>>> it can't mount the root filesystem. I'm using the dts/dtb > and kernel from > > >>>>>>>>>>>> the 13-current branch. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks for any and all help. I haven't used u-boot in > about decade. > > >>>>>>>>>>>> Spoiled by the x86 platform. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Mit Matelske > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> ***U-boot environment:*** > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> Marvell>> printenv > > >>>>>>>>>>>> baudrate=3D115200 > > >>>>>>>>>>>> bootargs=3Dconsole=3DttyMV0,115200 > earlycon=3Dar3700_uart,0xd0012000 > > >>>>>>>>>>>> root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 biosdevn= ame=3D0 > > >>>>>>>>>>>> bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr > $image_name;fatload mmc > > >>>>>>>>>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr > > >>>>>>>>>>>> bootdelay=3D2 > > >>>>>>>>>>>> bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr > $image_name;fatload mmc > > >>>>>>>>>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr > > >>>>>>>>>>>> console=3Dconsole=3DttyMV0,115200 > earlycon=3Dar3700_uart,0xd0012000 > > >>>>>>>>>>>> eth1addr=3D00:51:82:11:22:01 > > >>>>>>>>>>>> eth2addr=3D00:51:82:11:22:02 > > >>>>>>>>>>>> eth3addr=3D00:51:82:11:22:03 > > >>>>>>>>>>>> ethact=3Dneta@30000 > > >>>>>>>>>>>> ethaddr=3DF0:AD:4E:09:6B:8F > > >>>>>>>>>>>> ethprime=3Deth0 > > >>>>>>>>>>>> fdt_addr=3D0x4f00000 > > >>>>>>>>>>>> fdt_high=3D0xffffffffffffffff > > >>>>>>>>>>>> fdt_name=3Defi/boot/armada-3720-espressobin.dtb > > >>>>>>>>>>>> fdtcontroladdr=3D3f7161b8 > > >>>>>>>>>>>> gatewayip=3D10.4.50.254 > > >>>>>>>>>>>> get_images=3Dtftpboot $kernel_addr $image_name; tftpboot > $fdt_addr > > >>>>>>>>>>>> $fdt_name; run get_ramfs > > >>>>>>>>>>>> get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv > ramfs_addr > > >>>>>>>>>>>> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv > ramfs_addr -;fi > > >>>>>>>>>>>> hostname=3Dmarvell > > >>>>>>>>>>>> image_name=3Defi/freebsd/loader.efi > > >>>>>>>>>>>> initrd_addr=3D0xa00000 > > >>>>>>>>>>>> initrd_size=3D0x2000000 > > >>>>>>>>>>>> ipaddr=3D0.0.0.0 > > >>>>>>>>>>>> kernel_addr=3D0x5000000 > > >>>>>>>>>>>> loadaddr=3D0x5000000 > > >>>>>>>>>>>> netdev=3Deth0 > > >>>>>>>>>>>> netmask=3D255.255.255.0 > > >>>>>>>>>>>> ramfs_addr=3D0x8000000 > > >>>>>>>>>>>> ramfs_name=3D- > > >>>>>>>>>>>> root=3Droot=3D/dev/nfs rw > > >>>>>>>>>>>> rootpath=3D/srv/nfs/ > > >>>>>>>>>>>> serverip=3D0.0.0.0 > > >>>>>>>>>>>> set_bootargs=3Dsetenv bootargs $console $root > > >>>>>>>>>>>> > ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none > > >>>>>>>>>>>> nfsroot=3D$serverip:$rootpath $extra_params > > >>>>>>>>>>>> stderr=3Dserial@12000 > > >>>>>>>>>>>> stdin=3Dserial@12000 > > >>>>>>>>>>>> stdout=3Dserial@12000 > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> ***Full boot logs:*** > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - > 15:39:10 +0800) > > >>>>>>>>>>>> > > >>>>>>>>>>>> Model: Marvell Armada 3720 Community Board ESPRESSOBin > > >>>>>>>>>>>> CPU @ 1000 [MHz] > > >>>>>>>>>>>> L2 @ 800 [MHz] > > >>>>>>>>>>>> TClock @ 200 [MHz] > > >>>>>>>>>>>> DDR @ 800 [MHz] > > >>>>>>>>>>>> DRAM: 1 GiB > > >>>>>>>>>>>> U-Boot DT blob at : 000000003f7161b8 > > >>>>>>>>>>>> Comphy-0: USB3 5 Gbps > > >>>>>>>>>>>> Comphy-1: PEX0 2.5 Gbps > > >>>>>>>>>>>> Comphy-2: SATA0 6 Gbps > > >>>>>>>>>>>> SATA link 0 timeout. > > >>>>>>>>>>>> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode > > >>>>>>>>>>>> flags: ncq led only pmp fbss pio slum part sxs > > >>>>>>>>>>>> PCIE-0: Link down > > >>>>>>>>>>>> MMC: sdhci@d0000: 0, sdhci@d8000: 1 > > >>>>>>>>>>>> SF: Detected mx25u3235f with page size 256 Bytes, erase > size 64 KiB, > > >>>>>>>>>>>> total 4 MiB > > >>>>>>>>>>>> Net: eth0: neta@30000 [PRIME] > > >>>>>>>>>>>> Hit any key to stop autoboot: 0 > > >>>>>>>>>>>> switch to partitions #0, OK > > >>>>>>>>>>>> mmc0 is current device > > >>>>>>>>>>>> reading efi/freebsd/loader.efi > > >>>>>>>>>>>> 603872 bytes read in 49 ms (11.8 MiB/s) > > >>>>>>>>>>>> reading efi/boot/armada-3720-espressobin.dtb > > >>>>>>>>>>>> 15946 bytes read in 17 ms (916 KiB/s) > > >>>>>>>>>>>> ## Starting EFI application at 05000000 ... > > >>>>>>>>>>>> Scanning disk sdhci@d0000.blk <mailto:sdhci@d0000.blk>... > > >>>>>>>>>>>> Card did not respond to voltage select! > > >>>>>>>>>>>> mmc_init: -95, time 50 > > >>>>>>>>>>>> Found 1 disks > > >>>>>>>>>>>> Consoles: EFI console > > >>>>>>>>>>>> FreeBSD/arm64 EFI loader, Revision 1.1 > > >>>>>>>>>>>> > > >>>>>>>>>>>> Command line arguments: loader.efi > > >>>>>>>>>>>> EFI version: 2.05 > > >>>>>>>>>>>> EFI Firmware: Das U-boot (rev 0.00) > > >>>>>>>>>>>> Console: efi (0) > > >>>>>>>>>>>> Failed to find bootable partition > > >>>>>>>>>>>> Startup error in /boot/lua/loader.lua: seconds > > >>>>>>>>>>>> LUA ERROR: cannot open /boot/lua/loader.lua: invalid > argument. > > >>>>>>>>>>>> > > >>>>>>>>>>>> can't load 'kernel' > > >>>>>>>>>>>> > > >>>>>>>>>>>> Type '?' for a list of commands, 'help' for more detailed > help. > > >>>>>>>>>>>> OK > > >>>>>>>>>>>> OK set currdev=3Ddisk0p2 > > >>>>>>>>>>>> OK boot > > >>>>>>>>>>>> > > >>>>>>>>>>>> /boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae= 94 > > >>>>>>>>>>>> syms=3D[0x8+0x137dd8+0x8+0x126260] > > >>>>>>>>>>>> Using DTB provided by EFI at 0x8000000. > > >>>>>>>>>>>> ---<<BOOT>>--- > > >>>>>>>>>>>> KDB: debugger backends: ddb > > >>>>>>>>>>>> KDB: current backend: ddb > > >>>>>>>>>>>> Copyright (c) 1992-2019 The FreeBSD Project. > > >>>>>>>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, > 1992, 1993, 1994 > > >>>>>>>>>>>> The Regents of the University of California. All rights > reserved. > > >>>>>>>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundatio= n. > > >>>>>>>>>>>> FreeBSD 13.0-CURRENT GENERIC arm64 > > >>>>>>>>>>>> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540= ) > (based on > > >>>>>>>>>>>> LLVM 6.0.1) > > >>>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performanc= e. > > >>>>>>>>>>>> VT: init without driver. > > >>>>>>>>>>>> Starting CPU 1 (1) > > >>>>>>>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > >>>>>>>>>>>> arc4random: WARNING: initial seeding bypassed the > cryptographic random > > >>>>>>>>>>>> device because it was not yet seeded and the knob > 'bypass_before_seeding' > > >>>>>>>>>>>> was enabled. > > >>>>>>>>>>>> random: entropy device external interface > > >>>>>>>>>>>> MAP 3e681000 mode 2 pages 1 > > >>>>>>>>>>>> MAP 3ffa6000 mode 2 pages 1 > > >>>>>>>>>>>> kbd0 at kbdmux0 > > >>>>>>>>>>>> ofwbus0: <Open Firmware Device Tree> > > >>>>>>>>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0 > > >>>>>>>>>>>> simplebus1: <Flattened device tree simple bus> on simplebu= s0 > > >>>>>>>>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem > > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 > > >>>>>>>>>>>> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem > > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 > > >>>>>>>>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on > ofwbus0 > > >>>>>>>>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem > > >>>>>>>>>>>> > 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1= d91fff,0x1da0000-0x1dbffff > > >>>>>>>>>>>> irq 27 on simplebus1 > > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq > 28,29,30,31,32,33,34,35,36,37,38,39 on > > >>>>>>>>>>>> simple_mfd0 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on > simple_mfd1 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0 > > >>>>>>>>>>>> gpioregulator0: cannot get pin 0 > > >>>>>>>>>>>> gpioregulator0: cannot parse parameters > > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6 > > >>>>>>>>>>>> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbu= s0 > > >>>>>>>>>>>> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz > quality 1000 > > >>>>>>>>>>>> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz > quality 1000 > > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq > 28,29,30,31,32,33,34,35,36,37,38,39 on > > >>>>>>>>>>>> simple_mfd0 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on > simple_mfd1 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0 > > >>>>>>>>>>>> gpioregulator0: cannot get pin 0 > > >>>>>>>>>>>> gpioregulator0: cannot parse parameters > > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq > 28,29,30,31,32,33,34,35,36,37,38,39 on > > >>>>>>>>>>>> simple_mfd0 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on > simple_mfd1 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0 > > >>>>>>>>>>>> gpioregulator0: cannot get pin 0 > > >>>>>>>>>>>> gpioregulator0: cannot parse parameters > > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq > 28,29,30,31,32,33,34,35,36,37,38,39 on > > >>>>>>>>>>>> simple_mfd0 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on > simple_mfd1 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0 > > >>>>>>>>>>>> gpioregulator0: cannot get pin 0 > > >>>>>>>>>>>> gpioregulator0: cannot parse parameters > > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq > 28,29,30,31,32,33,34,35,36,37,38,39 on > > >>>>>>>>>>>> simple_mfd0 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on > simple_mfd1 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0 > > >>>>>>>>>>>> gpioregulator0: cannot get pin 0 > > >>>>>>>>>>>> gpioregulator0: cannot parse parameters > > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6 > > >>>>>>>>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0 > > >>>>>>>>>>>> cpu0: <Open Firmware CPU> on cpulist0 > > >>>>>>>>>>>> cpu1: <Open Firmware CPU> on cpulist0 > > >>>>>>>>>>>> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0 > > >>>>>>>>>>>> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1 > > >>>>>>>>>>>> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus= 1 > > >>>>>>>>>>>> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq > 9,10,11 on > > >>>>>>>>>>>> simplebus1 > > >>>>>>>>>>>> uart0: console (115200,n,8,1) > > >>>>>>>>>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq > 28,29,30,31,32,33,34,35,36,37,38,39 on > > >>>>>>>>>>>> simple_mfd0 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus= 1 > > >>>>>>>>>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem > > >>>>>>>>>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on > simple_mfd1 > > >>>>>>>>>>>> gpio0: cannot allocate memory window > > >>>>>>>>>>>> device_attach: gpio0 attach returned 6 > > >>>>>>>>>>>> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on > simplebus1 > > >>>>>>>>>>>> mvneta0: version is 10 > > >>>>>>>>>>>> mvneta0: Ethernet address: 00:a6:39:ca:e8:00 > > >>>>>>>>>>>> mdio0: <MDIO> on mvneta0 > > >>>>>>>>>>>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 > > >>>>>>>>>>>> e6000sw0: <Marvell 88E6341> on mdio0 > > >>>>>>>>>>>> e6000sw0: multi-chip addressing mode (0x1) > > >>>>>>>>>>>> e6000sw0: CPU port at 0 > > >>>>>>>>>>>> e6000sw0: fixed port at 0 > > >>>>>>>>>>>> e6000sw0: PHY at port 1 > > >>>>>>>>>>>> miibus0: <MII bus> on e6000sw0 > > >>>>>>>>>>>> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0 > > >>>>>>>>>>>> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, > > >>>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, > 1000baseT-FDX-master, auto > > >>>>>>>>>>>> e6000sw0: PHY at port 2 > > >>>>>>>>>>>> miibus1: <MII bus> on e6000sw0 > > >>>>>>>>>>>> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1 > > >>>>>>>>>>>> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, > > >>>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, > 1000baseT-FDX-master, auto > > >>>>>>>>>>>> e6000sw0: PHY at port 3 > > >>>>>>>>>>>> miibus2: <MII bus> on e6000sw0 > > >>>>>>>>>>>> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2 > > >>>>>>>>>>>> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, > > >>>>>>>>>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, > 1000baseT-FDX-master, auto > > >>>>>>>>>>>> e6000sw0: switch is ready. > > >>>>>>>>>>>> etherswitch0: <Switch controller> on e6000sw0 > > >>>>>>>>>>>> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff ir= q > 16 on > > >>>>>>>>>>>> simplebus1 > > >>>>>>>>>>>> xhci0: 32 bytes context size, 32-bit DMA > > >>>>>>>>>>>> usbus0 on xhci0 > > >>>>>>>>>>>> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus= 1 > > >>>>>>>>>>>> ehci0: <Marvell Integrated USB 2.0 controller> mem > 0x5e000-0x5efff irq > > >>>>>>>>>>>> 17 on simplebus1 > > >>>>>>>>>>>> usbus1: EHCI version 1.0 > > >>>>>>>>>>>> usbus1 on ehci0 > > >>>>>>>>>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus= 1 > > >>>>>>>>>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem > > >>>>>>>>>>>> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1 > > >>>>>>>>>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 o= n > simplebus1 > > >>>>>>>>>>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier > supported with FBS > > >>>>>>>>>>>> ahcich0: <AHCI channel> at channel 0 on ahci0 > > >>>>>>>>>>>> device_attach: ahcich0 attach returned 6 > > >>>>>>>>>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0 > > >>>>>>>>>>>> gpioregulator0: cannot get pin 0 > > >>>>>>>>>>>> gpioregulator0: cannot parse parameters > > >>>>>>>>>>>> device_attach: gpioregulator0 attach returned 6 > > >>>>>>>>>>>> cryptosoft0: <software crypto> > > >>>>>>>>>>>> Timecounters tick every 1.000 msec > > >>>>>>>>>>>> mvneta0: link state changed to UP > > >>>>>>>>>>>> e6000sw0port1: link state changed to DOWN > > >>>>>>>>>>>> e6000sw0port2: link state changed to DOWN > > >>>>>>>>>>>> e6000sw0port3: link state changed to DOWN > > >>>>>>>>>>>> usbus0: 5.0Gbps Super Speed USB v3.0 > > >>>>>>>>>>>> usbus1: 480Mbps High Speed USB v2.0 > > >>>>>>>>>>>> Release APs...done > > >>>>>>>>>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 > > >>>>>>>>>>>> Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMUL= L> > > >>>>>>>>>>>> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install > [ro,noatime]... > > >>>>>>>>>>>> Instruction Set Attributes 1 =3D <> > > >>>>>>>>>>>> Root mount waiting for: Processor Features 0 =3D > > >>>>>>>>>>>> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32> > > >>>>>>>>>>>> usbus1 Processor Features 1 =3D <0> > > >>>>>>>>>>>> usbus0 Memory Model Features 0 =3D <4k Granule,64k > Granule,S/NS > > >>>>>>>>>>>> Mem,MixedEndian,16bit ASID,1TB PA> > > >>>>>>>>>>>> > > >>>>>>>>>>>> Memory Model Features 1 =3D <> > > >>>>>>>>>>>> Memory Model Features 2 =3D <32b CCIDX,48b VA> > > >>>>>>>>>>>> Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoin= ts,6 > > >>>>>>>>>>>> Breakpoints,PMUv3,Debug v8> > > >>>>>>>>>>>> Debug Features 1 =3D <0> > > >>>>>>>>>>>> Auxiliary Features 0 =3D <0> > > >>>>>>>>>>>> Auxiliary Features 1 =3D <0> > > >>>>>>>>>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 > > >>>>>>>>>>>> WARNING: WITNESS option enabled, expect reduced performanc= e. > > >>>>>>>>>>>> ugen0.1: <Generic XHCI root HUB> at usbus0 > > >>>>>>>>>>>> ugen1.1: <Marvell EHCI root HUB> at usbus1 > > >>>>>>>>>>>> uhub0 on usbus0 > > >>>>>>>>>>>> uhub1 on usbus1 > > >>>>>>>>>>>> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, > addr 1> on > > >>>>>>>>>>>> usbus0 > > >>>>>>>>>>>> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, > addr 1> on > > >>>>>>>>>>>> usbus1 > > >>>>>>>>>>>> uhub0: 2 ports with 2 removable, self powered > > >>>>>>>>>>>> uhub1: 1 port with 1 removable, self powered > > >>>>>>>>>>>> mountroot: waiting for device /dev/ufs/FreeBSD_Install... > > >>>>>>>>>>>> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with > error 19. > > >>>>>>>>>>>> > > >>>>>>>>>>>> Loader variables: > > >>>>>>>>>>>> vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install > > >>>>>>>>>>>> vfs.root.mountfrom.options=3Dro,noatime > > >>>>>>>>>>>> > > >>>>>>>>>>>> Manual root filesystem specification: > > >>>>>>>>>>>> <fstype>:<device> [options] > > >>>>>>>>>>>> Mount <device> using filesystem <fstype> > > >>>>>>>>>>>> and with the specified (optional) option list. > > >>>>>>>>>>>> > > >>>>>>>>>>>> eg. ufs:/dev/da0s1a > > >>>>>>>>>>>> zfs:zroot/ROOT/default > > >>>>>>>>>>>> cd9660:/dev/cd0 ro > > >>>>>>>>>>>> (which is equivalent to: mount -t cd9660 -o ro /dev/cd= 0 > /) > > >>>>>>>>>>>> > > >>>>>>>>>>>> ? List valid disk boot devices > > >>>>>>>>>>>> . Yield 1 second (for background tasks) > > >>>>>>>>>>>> <empty line> Abort manual input > > >>>>>>>>>>>> > > >>>>>>>>>>>> mountroot> ? > > >>>>>>>>>>>> > > >>>>>>>>>>>> List of GEOM managed disk devices: > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> mountroot> > > >>>>>>>>>>>> _______________________________________________ > > >>>>>>>>>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> > mailing list > > >>>>>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm < > https://lists.freebsd.org/mailman/listinfo/freebsd-arm>; > > >>>>>>>>>>>> To unsubscribe, send any mail to " > freebsd-arm-unsubscribe@freebsd.org <mailto: > freebsd-arm-unsubscribe@freebsd.org>" > > >>>>>>>>>>>> > > >>>>>>>>>>>> _______________________________________________ > > >>>>>>>>>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> > mailing list > > >>>>>>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm < > https://lists.freebsd.org/mailman/listinfo/freebsd-arm>; > > >>>>>>>>>>>> To unsubscribe, send any mail to " > freebsd-arm-unsubscribe@freebsd.org <mailto: > freebsd-arm-unsubscribe@freebsd.org>" > > >>>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> -- > > >>>>>>>>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org> > > >>>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> -- > > >>>>>>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org> > > >>>>>> > > >>>>>> > > >>>>>> -- > > >>>>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org> > > >>>>>> _______________________________________________ > > >>>>>> freebsd-arm@freebsd.org mailing list > > >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > > >>>>>> To unsubscribe, send any mail to " > freebsd-arm-unsubscribe@freebsd.org" > > >>>>> > > >>>>> > > >>>>> -- > > >>>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org> > > >>>>> _______________________________________________ > > >>>>> freebsd-arm@freebsd.org mailing list > > >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > > >>>>> To unsubscribe, send any mail to " > freebsd-arm-unsubscribe@freebsd.org" > > >>>> > > >>>> > > >>>> -- > > >>>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org> > > >>>> _______________________________________________ > > >>>> freebsd-arm@freebsd.org mailing list > > >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > > >>>> To unsubscribe, send any mail to " > freebsd-arm-unsubscribe@freebsd.org" > > >>> > > >>> > > >>> -- > > >>> Emmanuel Vadot <manu@bidouilliste.com <mailto:manu@bidouilliste.com= >> > <manu@freebsd.org <mailto:manu@freebsd.org>> > > >> > > > > > > > > > -- > > > Emmanuel Vadot <manu@bidouilliste.com <mailto:manu@bidouilliste.com>> > <manu@freebsd.org <mailto:manu@freebsd.org>> > > > > > -- > Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org> > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAkMUSXsgxP_fOJdfks%2Bd35MnyoXf1GfPO%2BC-YmTK3TpKDH7gA>