Date: Tue, 5 Nov 1996 02:41:00 -0800 (PST) From: Veggy Vinny <richardc@CSUA.Berkeley.EDU> To: sthaug@nethelp.no Cc: se@zpr.uni-koeln.de, joerg_wunsch@uriah.heep.sax.de, freebsd-current@freebsd.org Subject: Re: ncrcontrol in -current Message-ID: <Pine.PTX.3.95.961105023826.13095c-100000@soda.CSUA.Berkeley.EDU> In-Reply-To: <2731.847161823@verdi.nethelp.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 5 Nov 1996 sthaug@nethelp.no wrote:
> > > The reason for a mismatch (if both ncrcontrol and the kernel
> > > were in fact built from corresponding sources) is that you
> > > specified some kernel config option (i.e. the maximum number
> > > of LUNs or TAGs) that have not become visible to the build
> > > process for ncrcontrol.
> >
> > Hmmm, okay...
> >
> > > So, please add those kernel options to the ncrcontrol Makefile
> > > and rebuilt ncrcontrol, if that might be the cause of your
> > > problem.
> >
> > Oh okay but I know I don't have any kernel options relating to the
> > ncr since the other machines use Adaptec 2940W controllers and not the
> > NCR-810.
>
> Do you have FAILSAFE? That one bit me. It *does* influence max # of
> LUNs/tags.
I just tested it with both FAILSAFE and without FAILSAFE, you are
correct that with FAILSAFE it won't work. Without FAILSAFE, ncrcontrol
works fine but during bootup, I noticed lots of stuff about ncr that I'm
pasting my dmesg output below so maybe Stefan can fix this:
FreeBSD 3.0-CURRENT #0: Mon Nov 4 21:59:24 PST 1996
vince@bigbang.COSC.GOV:/usr/src/sys/compile/EINSTEIN
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 89807169 Hz, i8254 clock: 1193092 Hz
CPU: Pentium (89.81-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x524 Stepping=4
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 16777216 (16384K bytes)
avail memory = 14266368 (13932K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 1 on pci0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
vga0 <VGA-compatible display device> rev 0 int a irq 12 on pci0:10
ncr0 <ncr 53c810 scsi> rev 2 int a irq 12 on pci0:12
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "SEAGATE ST32550N 0022" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
2047MB (4194058 512 byte sectors)
(ncr0:2:0): "QUANTUM EMPIRE_1080S 1100" type 0 fixed SCSI 2
sd1(ncr0:2:0): Direct-Access
sd1(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1029MB (2109376 512 byte sectors)
(ncr0:3:0): "SONY CD-ROM CDU-76S 1.1c" type 5 removable SCSI 2
cd0(ncr0:3:0): CD-ROM
cd0(ncr0:3:0): 200ns (5 Mb/sec) offset 8.
cd0(ncr0:3:0): UNIT ATTENTION asc:28,0
cd0(ncr0:3:0): Not ready to ready transition, medium may have changed
cd present [400000 x 2048 byte records]
(ncr0:4:0): "HP C1750A 3125" type 3 fixed SCSI 1
uk0(ncr0:4:0): Unknown
(ncr0:4:1): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:1): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:1): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:2): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:2): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:2): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:3): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:3): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:3): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:4): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:4): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:4): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:5): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:5): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:5): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:6): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:6): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:6): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:7): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:7): COMMAND FAILED (4 82) @f13d5b0c.
(ncr0:4:7): COMMAND FAILED (4 82) @f13d5b0c.
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 not found at 0x300
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
mse0 not found at 0x23c
psm0: disabled, not probed.
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.2MB 5.25in
fd1: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 72004 AP>
wd0: 1916MB (3924144 sectors), 3893 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <ST31270A>
wd1: 1223MB (2504880 sectors), 2485 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <WDC AC31600H>
wd2: 1549MB (3173184 sectors), 3148 cyls, 16 heads, 63 S/T, 512 B/S
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/utp/bnc[*UTP*] address 00:60:8c:f3:3d:64
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
Checking for GUS Plug-n-Play ...
Board Vendor ID: GRV0001 Board Serial Number: 09000000
gus0 at 0x220 irq 11 drq 5 flags 0x7 on isa
at 0x32c dma 7,5
at 0x220 irq 11 dma 5,7
joy0 at 0x201 on isa
joy0: joystick
Vince
GaiaNet Corporation - Unix Networking Operations - GUS Mailing Lists Admin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.PTX.3.95.961105023826.13095c-100000>