Date: Sat, 2 May 2020 18:43:35 +0200 From: Polytropon <freebsd@edvax.de> To: Christoph Kukulies <kuku@kukulies.org> Cc: freebsd-questions@freebsd.org Subject: Re: sym0 weirdness Message-ID: <20200502184335.6722e8bd.freebsd@edvax.de> In-Reply-To: <2D7E0342-07D1-480C-9884-B9E190A43C58@kukulies.org> References: <373ced34-1fe5-c385-e2c4-20cc6f46d9f0@kukulies.org> <4f1729b9-5c8c-26d1-8a64-e7c17eecffb2@kukulies.org> <F1D07139-8B18-4EF4-AE53-FBBCF92FD932@kukulies.org> <2D7E0342-07D1-480C-9884-B9E190A43C58@kukulies.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 2 May 2020 18:23:26 +0200, Christoph Kukulies wrote: > I don’t know if it matters but in the case where the other > ASUS SC-200 got not recognized I took another PCI slot > leaving one PCI slot > unoccupied. With older PC machines, this is nothing special. :-) Sometimes mainboards are very picky about which cards work in which slots. Sometimes you need to use the function "Reset configuration data" in the BIOS so the change of cards will be recognized and properly communicated to the OS. The BIOS setting "PnP OS installed" might also have an effect. I once had a machine with on-board SCSI that would accept the intended set of PCI expansion cards only in one (!) specific order. PS. This is why you should use Adaptec SCSI controletti. ;-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20200502184335.6722e8bd.freebsd>