Date: Wed, 7 Dec 2005 16:31:51 -0600 From: Jason Harmening <jason.harmening@gmail.com> To: freebsd-stable@freebsd.org Subject: Re: [FreeBSD 6.0-RELEASE] Incorrect geometry for VIA RAID0 array Message-ID: <2d1264630512071431j6a509ab1g412f7848930a2053@mail.gmail.com> In-Reply-To: <2d1264630512071404s67a59ff4h6c488cde854b0c9e@mail.gmail.com> References: <2d1264630512071404s67a59ff4h6c488cde854b0c9e@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Here's the dmesg output from the installer: ad4: 70911MB <WDC WD740GD-00FLA1 27.08D27> at ata2-master SATA150 ad6: 70911MB <WDC WD740GD-00FLC0 33.08F33> at ata3-master SATA150 ar0: 70911MB <VIA Tech V-RAID RAID0 (stripe 64 KB)> status: READY ar0: disk0 READY using ad4 at ata2-master ar0: disk1 READY using ad6 at ata3-master On 12/7/05, Jason Harmening <jason.harmening@gmail.com> wrote: > > I'm trying to install FreeBSD 6.0-RELEASE on a RAID0 array attached to th= e > VIA 8237 controller on my Asus A8V Deluxe motherboard. The array consist= s > of two 74G drives. The installer recognizes the array as ar0, but when I > enter FDISK to set up my partition, the size of the array is only recogni= zed > as 74G, rather than the true 148G. I've double-checked all my BIOS > settings, and nothing seems out of order. Please help! > > Thanks, > Jason Harmening >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2d1264630512071431j6a509ab1g412f7848930a2053>