Date: Wed, 5 Aug 1998 08:27:15 +1100 (EDT) From: Andrew MacIntyre <andymac@bullseye.apana.org.au> To: Alex Helbig <alex@muse.org.au> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ACER 10/100 Ethernet Card in 2.2.7-RELEASE Message-ID: <Pine.OS2.3.95.980805081909.270A-100000@CENTRAL> In-Reply-To: <3.0.5.32.19980803153919.009ee150@ada.somerville.qld.edu.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 3 Aug 1998, Alex Helbig wrote: > I am having some hassles with the above mentioned card. This card uses a > digital 21140-AF chip which 2.2.7 recognises as de0. The card is 10/100 > autosensing. {....} > Since the upgrade I have installed and everything is working correctly, > except that roughly every two seconds I get a message on the console saying: > de0: link down: cable problem? > > But it all works! Any ideas why the error message? > > Points to note: > * I am running up the box on a 10Mb segment not the 100Mb where it will > eventually be. > But the 3com card was quite happy yo move back and forth between speeds. > * I never tried the DEC based card under 2.2.6 to know if the problem > existed there too. > * I have tried using ifconfig to set each of the LINK0-2 flags and no > setting of this > seems to make any difference. The de driver requires use of the ifconfig "media" and "mediaopt" options rather than the "link[0-2]" flag(s). The de manpage describes the available settings. -- Andrew I MacIntyre "These thoughts are mine alone..." E-mail: andrew.macintyre@aba.gov.au (work) | Snail: PO Box 370 andymac@bullseye.apana.org.au (play) | Belconnen ACT 2616 Fido: Andrew MacIntyre, 3:620/243.18 | Australia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OS2.3.95.980805081909.270A-100000>