Date: Fri, 15 Apr 2005 23:05:32 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: John Baldwin <jhb@FreeBSD.org> Cc: freebsd-alpha@FreeBSD.org Subject: Re: MiataGL doesn't boot in 5.4-RC2 Message-ID: <20050415210532.GA19790@freebie.xs4all.nl> In-Reply-To: <36c7b9df965e56594f437e41fc83cc59@FreeBSD.org> References: <20050412201350.GD602@pato.euesrg02.net> <20050412205104.GE40828@cicely12.cicely.de> <20050412210655.GA5737@freebie.xs4all.nl> <20050412212717.GF40828@cicely12.cicely.de> <20050414180341.GA15335@freebie.xs4all.nl> <20050414182217.GA15448@freebie.xs4all.nl> <20050415002328.GB2369@pato.euesrg02.net> <20050415103927.GV48482@cicely12.cicely.de> <36c7b9df965e56594f437e41fc83cc59@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit On Fri, Apr 15, 2005 at 12:10:29PM -0400, John Baldwin wrote.. > > On Apr 15, 2005, at 6:39 AM, Bernd Walter wrote: > > >On Fri, Apr 15, 2005 at 02:23:28AM +0200, Victor Balada Diaz wrote: > >>On Thu, Apr 14, 2005 at 08:22:17PM +0200, Wilko Bulte wrote: > >>>But I noticed something else in the system of the original poster: > >>>a TGA2 display card. Any chance you can give it a try without that > >>>one > >>>please? There has been some fun with the various TGA display > >>>adapters in > >>>the past. > >> > >>I tried without the TGA card and it hangs in the same place. I can > >>provide > >>shell if needed. > > > >It has the card already done acording to boot log: > > pci0: <display, VGA> at device 11.0 (no driver attached) > >The symptoms are the same as described by José M. Fandiño in > ><42444922.794080FB@fadesa.es> a few days ago. > >Next in boot order should be ata access. > >In José's case removing ata from kernel helped to boot, but he has > >devices attached that he needs. > > > >Victors machine has the IDE part of the Cypress chip probed the > >following: > >found-> vendor=0x1080, dev=0xc693, revid=0x00 > > bus=0, slot=7, func=1 > > class=01-01-80, hdrtype=0x00, mfdev=1 > > cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=238 > > map[10]: type 4, range 32, base 00000170, size 3, enabled > > map[14]: type 4, range 32, base 00000374, size 2, enabled > > map[20]: type 1, range 32, base 80140000, size 16, memory > >disabled > >found-> vendor=0x1080, dev=0xc693, revid=0x00 > > bus=0, slot=7, func=2 > > class=01-01-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=b, irq=239 > > map[10]: type 1, range 32, base 80158000, size 12, enabled > > > >You can see a mapping at 0x170 of 8 Bytes, but the second channel > >has no mapping at 0x1f0. > >Wilko, can you compare this with your PC164SX? > >Would be interesting if removing the ata hints will help, as they are > >the one refering to the ISA compatibility adresses. > > Our PCI code in 5.x and newer makes certain assumptions about resources > for ATA controllers as well, so you may want to forward this on to > Soren and Warner to see if they have any ideas. Attached a boot -v of 5.4-RC2 on my 164sx. But note that it is a SCSI system, no ATA stuff attached. -- Wilko Bulte wilko@FreeBSD.org --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=foo Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RC2 #0: Sun Apr 10 21:51:00 UTC 2005 root@ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc00009e4000. EB164 Digital AlphaPC 164SX 533 MHz, 531MHz 8192 byte page size, 1 processor. CPU: PCA56 (21164PC) major=9 minor=2 extensions=0x101<BWX,MVI> OSF PAL rev: 0x1000600020117 real memory = 1071554560 (1021 MB) Physical memory chunk(s): 0x00a04000 - 0x3f0b5fff, 1047207936 bytes (127833 pages) avail memory = 1040318464 (992 MB) null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory> cia0: <2117x Core Logic chipset> cia0: Pyxis, pass 1 cia0: extended capabilities: 1<BWEN> pcib0: <2117x PCI host bus adapter> on cia0 pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base 82240000, size 12, enabled map[14]: type 4, range 32, base 00010100, size 6, enabled map[18]: type 1, range 32, base 82000000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 64, base 82200000, size 16, enabled found-> vendor=0x14e4, dev=0x1645, revid=0x15 bus=0, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=8, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00010140, size 4, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=8, func=1 class=01-01-80, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 00000170, size 3, enabled map[14]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 1, range 32, base 82220000, size 16, memory disabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=8, func=2 class=01-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[10]: type 1, range 32, base 82241000, size 12, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=8, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 00010000, size 8, enabled map[14]: type 1, range 32, base 82242000, size 12, enabled found-> vendor=0x9004, dev=0x8178, revid=0x01 bus=0, slot=9, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=8 powerspec 1 supports D0 D3 current D0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x10100-0x1013f mem 0x82000000-0x820fffff,0x82240000-0x82240fff irq 9 at device 5.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x82240000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000e 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:d0:b7:55:5f:ae fxp0: interrupting at CIA irq 9 fxp0: [MPSAFE] pci0: <network, ethernet> at device 7.0 (no driver attached) isab0: <PCI-ISA bridge> at device 8.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Cypress 82C693 ATA controller> port 0x10140-0x1014f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x10140 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata0: interrupting at ISA irq 14 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: interrupting at ISA irq 15 ata1: [MPSAFE] atapci1: <GENERIC ATA controller> port 0x377-0x37a,0x170-0x177 mem 0x82220000-0x8222ffff at device 8.2 on pci0 atapci1: failed: rid 0x20 is memory, requested 4 atapci1: unable to map interrupt ata2: channel #0 on atapci1 device_attach: ata2 attach returned 6 ohci0: <OHCI (generic) USB controller> mem 0x82241000-0x82241fff at device 8.3 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x82241000 ohci0: Could not allocate irq device_attach: ohci0 attach returned 6 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x10000-0x100ff mem 0x82242000-0x82242fff irq 8 at device 9.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x10000 ahc0: Enabling 39Bit Addressing ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable is present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 449 instructions downloaded ahc0: Features 0x10005, Bugs 0x11, Flags 0x29485540 ahc0: interrupting at CIA irq 8 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: interrupting at ISA irq 1 atkbd0: [GIANT-LOCKED] psm0: current command byte:0021 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. fdc0: ic_type 90 part_id 80 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 80 fdc0: interrupting at ISA irq 6 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 533174631 Hz (firmware 531914893 Hz) i8254 clock: 1190793 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 ppc0: interrupting at ISA irq 7 sc0: no video adapter found. sc0: <System console> failed to probe on isa0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: <Generic ISA VGA> failed to probe on isa0 isa_probe_children: probing PnP devices procfs registered Timecounter "i8254" frequency 1193182 Hz quality 0 Timecounter "alpha" frequency 533174631 Hz quality 800 Timecounters tick every 0.976 msec lo0: bpf attached Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. ahc0: Selection Timeout on A:8. 0 SCBs aborted ahc0: Selection Timeout on A:9. 0 SCBs aborted ahc0: Selection Timeout on A:13. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:10. 0 SCBs aborted ahc0: Selection Timeout on A:11. 0 SCBs aborted ahc0: Selection Timeout on A:12. 0 SCBs aborted ahc0: Selection Timeout on A:14. 0 SCBs aborted ahc0: Selection Timeout on A:15. 0 SCBs aborted ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:5. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted (probe0:ahc0:0:0:0): Retrying Command (probe1:ahc0:0:1:0): Retrying Command (probe0:ahc0:0:0:0): error 22 (probe0:ahc0:0:0:0): Unretryable Error (ahc0:A:0:0): Sending SDTR period c, offset f (ahc0:A:0:0): Received SDTR period 19, offset f Filtered to period 19, offset f ahc0: target 0 synchronous at 10.0MHz, offset = 0xf (ahc0:A:0:0): Sending SDTR period 19, offset f (ahc0:A:0:0): Received SDTR period 19, offset f Filtered to period 19, offset f (ahc0:A:1:0): Sending WDTR 1 (ahc0:A:1:0): Received WDTR 1 filtered to 1 ahc0: target 1 using 16bit transfers (ahc0:A:1:0): Sending SDTR period c, offset 8 (ahc0:A:1:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc0: target 1 synchronous at 20.0MHz, offset = 0x8 pass0 at ahc0 bus 0 target 0 lun 0 pass0: <TOSHIBA CD-ROM XM-6201TA 1206> Removable CD-ROM SCSI-2 device pass0: 10.000MB/s transfers (10.000MHz, offset 15) pass1 at ahc0 bus 0 target 1 lun 0 pass1: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device pass1: Serial Number REF38392 pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled (ahc0:A:0:0): Sending SDTR period 19, offset f GEOM: new disk cd0 GEOM: new disk da0 (ahc0:A:0:0): Received SDTR period 19, offset f Filtered to period 19, offset f (cd0:ahc0:0:0:0): error 6 (cd0:ahc0:0:0:0): Unretryable Error cd0 at ahc0 bus 0 target 0 lun 0 cd0: <TOSHIBA CD-ROM XM-6201TA 1206> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at ahc0 bus 0 target 1 lun 0 da0: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device da0: Serial Number REF38392 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) (ahc0:A:0:0): Sending SDTR period 19, offset f (ahc0:A:0:0): Received SDTR period 19, offset f Filtered to period 19, offset f (cd0:ahc0:0:0:0): error 6 (cd0:ahc0:0:0:0): Unretryable Error (ahc0:A:0:0): Sending SDTR period 19, offset f (ahc0:A:0:0): Received SDTR period 19, offset f Filtered to period 19, offset f (cd0:ahc0:0:0:0): error 6 (cd0:ahc0:0:0:0): Unretryable Error GEOM: Configure da0a, start 0 length 268435456 end 268435455 GEOM: Configure da0b, start 268435456 length 2143109120 end 2411544575 GEOM: Configure da0c, start 0 length 9139200000 end 9139199999 GEOM: Configure da0d, start 2411544576 length 268435456 end 2679980031 GEOM: Configure da0e, start 2679980032 length 268435456 end 2948415487 GEOM: Configure da0f, start 2948415488 length 6190784512 end 9139199999 Mounting root from ufs:/dev/da0a start_init: trying /sbin/init --5mCyUwZo2JvN/JJP--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050415210532.GA19790>