Date: Sun, 27 Feb 2000 14:02:12 -0800 From: "John Purser" <johnmpurser@home.com> To: "'Johan Pettersson'" <johpe159@student.liu.se> Cc: <freebsd-questions@FreeBSD.ORG> Subject: RE: 2 hd,still prob. Message-ID: <000101bf816e$4d834f20$40390918@vncvr1.wa.home.com> In-Reply-To: <38B935A0.C27FBDA7@buckhorn.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I recall a letter to this list some time back which was about someone having trouble adding a second EIDE hard drive. If I remember correctly he found out he hadn't set the drive jumpers to Master/Slave, they were both jumpered as Master as I recall. You might want to check that. John Purser -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Bob Martin Sent: Sunday, February 27, 2000 6:33 AM To: Johan Pettersson Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 2 hd,still prob. Johan, This is just an educated guess. BSD requires hd's to be in order before anything else. Is the hard drive on the secondary ide the primary? Johan Pettersson wrote: > > Johan Pettersson wrote: > > > Hello! > > > > I have installed 2 hd of same sort and size. > > And it seems like only one of them will be > > given dma/irq! I can't find anything about that > > problem. Grateful for help! > > > > ------8<---------------------------- > > wdc0 at 0x1f0-0x1f7 irq 14 on isa > > wdc0: unit 0 (wd0): <SAMSUNG WNR-31601A (1600MB)> > > wd0: 1536MB (3145968 sectors), 3121 cyls, 16 heads, 63 S/T, 512 B/S > > wdc0: unit 1 (wd1): <WDC AC36400L> > > wd1: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S > > wdc1 at 0x170-0x177 irq 15 on isa > > wdc1: unit 0 (wd2): <WDC AC36400L> > > wd2: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S > > wt0 not found at 0x300 > > ------8<---------------------------- > > > > But when I run fdisk under sysinstall I've got error mess. > Wd1 works fine, but when I try to create a filesystem on wd2 > (wd2s1e /S2 6149MB UFS Y) I've got following error: > ----------------8<--------------------- > Feb 27 14:03:43 b152 /kernel: wd2: wdtimeout() DMA status 4 > Feb 27 14:03:54 b152 /kernel: wd2: interrupt timeout (status > 58<rdy,seekdone,drq> error 1<no_dam > Feb 27 14:04:29 b152 /kernel: wd2: Last time I say: interrupt timeout. > Probably a portable PC. > no_dam>) > ----------------8<---------------------- > I run FreeBSD 3.4-RELEASE (kernel-GENERIC) > > //thx Johan > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000101bf816e$4d834f20$40390918>