Date: Tue, 9 May 2017 14:01:23 +0100 From: Mike Wolman <mike@wolman.co.uk> To: Mori Hiroki <yamori813@yahoo.co.jp>, Aleksandr Rybalko <ray@ddteam.net> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: onion omega2+ Message-ID: <6f1b2d35-5d17-765a-6138-0ab85455fc09@wolman.co.uk> In-Reply-To: <39222.11970.qm@web101719.mail.ssk.yahoo.co.jp> References: <694efc3a-e183-35a1-a0bf-9a9c0d708826@wolman.co.uk> <CAJ1Oi8G%2BvTMBX4Ey=H=2WruXDjXjcyte5_n8T3VDdL=h8m7%2BVw@mail.gmail.com> <e92bc818-485f-d9fc-da2b-776bae2b0916@wolman.co.uk> <410144.69078.qm@web101716.mail.ssk.yahoo.co.jp> <fda8b792-f6c4-d0fb-5a99-d190cc3a4f39@wolman.co.uk> <128807.28836.qm@web101715.mail.ssk.yahoo.co.jp> <2d555385-8258-fd75-e4a3-a1e59bf86314@wolman.co.uk> <651873.78746.qm@web101702.mail.ssk.yahoo.co.jp> <CAJ1Oi8Hemuug5JRP9btUgs-MmCFgb-_qS0qrEW7h=BhPAYXpFQ@mail.gmail.com> <2c5cd01a-a8d4-3ffa-4e9c-2aad170574c1@wolman.co.uk> <39222.11970.qm@web101719.mail.ssk.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
No joy Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage * * Reading file "kernel.MT7628_FDT.uImage" * ** ** ** ** ** ** ** ** ** ** ****** ****** ****************************************************************************************************************************************************************************************************************** **** * FAT: 5654824 Bytes read Omega2 # bootm ## Booting image at 80100000 ... Bad Magic Number,CE6AE7C4 I am going to get a different usb memory stick and rebuild the kernel later on as i got an error when last writing to the usb memory key and its quite old now so just want to eliminate it from testing. On 09/05/2017 13:52, Mori Hiroki wrote: > Hi. > > This is my sample operation get image from network and boot. > > RT3052 # tftpboot 0x80800000 Planex_MZK-WNH_kernel.kbin.oldlzma.uboot > RT3052 # bootm > > > I don't use USB support U-Boot. But I think fatload command argument is > temporary memory address not kernel address. > > How about this. > > Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage > Omega2 # bootm > > ----- Original Message ----- >> From: Mike Wolman <mike@wolman.co.uk> >> To: Aleksandr Rybalko <ray@ddteam.net>; Mori Hiroki <yamori813@yahoo.co.jp> >> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >> Date: 2017/5/9, Tue 20:48 >> Subject: Re: onion omega2+ >> >> >> >> >> Is it possible to exclude the compression of the kernel/image for > now eg: >> mkimage -A mips -C none -O linux -T kernel -a 0x80001000 -e > 0x80001100 -n "FreeBSD" -d kernel.MT7628_FDT > kernel.MT7628_FDT.uImage >> >> I have just tried the above but when booting I get a Bad Magic > Number. >> >> Omega2 # fatload usb 0:1 0x80001000 kernel.MT7628_FDT.uImage >> * >> * >> Reading file "kernel.MT7628_FDT.uImage" >> * >> ** >> ** >> ** >> ** >> ** >> ** >> ** >> ** >> ** >> ** >> ****** >> ****** >> ****************************************************************************************************************************************************************************************************************** >> **** >> * >> FAT: 5654824 Bytes read >> Omega2 # bootm 0x80001100 >> ## Booting image at 80001100 ... >> Bad Magic Number,1C994480 >> Omega2 # >> >> >> I have seen other examples starting a program directly with going to > the address but this didnt work either: >> Omega2 # go 0x80001100 >> ## Starting application at 0x80001100 ... >> >> omega freezes here. >> >> >> >> >> On 09/05/2017 10:12, Aleksandr Rybalko wrote: >> >> Fix things in order :) > Currently you have problem with LZMA, serial port later. >>> > So, find version of lzma used to build linux firmware, MIPS routers world use about 5 incompatible versions. One of them, you can find here: >>> http://project.zrouter.org/hg/zrouter/file/9ac53695a44d/tools/oldlzma >>> >>> >>> >>> >>> 2017-05-09 7:03 GMT+03:00 Mori Hiroki <yamori813@yahoo.co.jp>: >>> >>> Hi Mike >>>> Could you show u-boot printenv command result. >>>> >>>> Thanks >>>> >>>> >>>> ----- Original Message ----- >>>>> From: Mike Wolman <mike@wolman.co.uk> >>>>> To: Mori Hiroki <yamori813@yahoo.co.jp>; "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >>>>> Cc: >>>>> Date: 2017/5/9, Tue 10:30 >>>>> Subject: Re: onion omega2+ >>>>> >>>>> Hi Mori, >>>>> >>>>> When I compiled the world/kernel etc I used: >>>>> >>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>> ../freebsd-wifi-build/build/ bin/build ralink > buildkernel >>>>> I checked the serial stuff was the same as the > other configs in: >>>>> https://github.com/freebsd/ freebsd-wifi-build/ >>>>> and they looked the same. >>>>> >>>>> The OMEGA2.dtsi file has: >>>>> >>>>> chosen { >>>>> bootargs = "console=ttyS0,115200"; >>>>> }; >>>>> >>>>> >>>>> And mt7628an.dtsi has: serial0 = &uartlite; >>>>> >>>>> I dont think im getting as far as worrying about > the serial console at >>>>> the moment and need to get the kernel to uncompress > first. >>>>> Mike. >>>>> >>>>> >>>>> On 09/05/2017 02:20, Mori Hiroki wrote: >>>>>> Hi Mike >>>>>> >>>>>> In FreeBSD is use serial0 dts item to console. >>>>>> >>>>>> I think good to use this at start. >>>>>> >>>>>> freebsd/sys/gnu/dts/mips/ MT7628.dts >>>>>> >>>>>> ----- Original Message ----- >>>>>>> From: Mike Wolman <mike@wolman.co.uk> >>>>>>> To: Mori Hiroki <yamori813@yahoo.co.jp>; >>>>> "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >>>>>>> Cc: >>>>>>> Date: 2017/5/9, Tue 09:25 >>>>>>> Subject: Re: onion omega2+ >>>>>>> >>>>>>> Hi Mori, >>>>>>> >>>>>>> I grabbed the dts files from: >>>>>>> >>>>>>> https://github.com/WereCatf/ source/tree/image/target/ linux/ramips/dts >>>>>>> >>>>> https://github.com/WereCatf/ source/blob/image/target/ linux/ramips/dts/OMEGA2P.dts >>>>> https://github.com/WereCatf/ source/blob/image/target/ linux/ramips/dts/OMEGA2.dtsi >>>>>>> If this is of any use from the default > linux install on the flash: >>>>>>> root@Omega-12BF:/proc# cat /proc/mtd >>>>>>> dev: size erasesize name >>>>>>> mtd0: 00030000 00010000 "u-boot" >>>>>>> mtd1: 00010000 00010000 "u-boot-env" >>>>>>> mtd2: 00010000 00010000 "factory" >>>>>>> mtd3: 01fb0000 00010000 "firmware" >>>>>>> mtd4: 00148842 00010000 "kernel" >>>>>>> mtd5: 01e677be 00010000 "rootfs" >>>>>>> mtd6: 01950000 00010000 "rootfs_data" >>>>>>> >>>>>>> >>>>>>> btw after posting i spotted and error in > what i did with: >>>>>>> mkimage -A mips -O linux -T kernel -C lzma > \ >>>>>>> -a 0x80001000 -e 0x80001100 \ >>>>>>> -n "FreeBSD" -d > kernel.MT7628_FDT.lzma >>>>>>> kernel.MT7628_FDT.ulzma.uImage >>>>>>> >>>>>>> I have redone this using the correct > compressed kernel ie: >>>>>>> mkimage -A mips -O linux -T kernel -C lzma > \ >>>>>>> -a 0x80001000 -e 0x80001100 \ >>>>>>> -n "FreeBSD" -d > kernel.MT7628_FDT.ulzma >>>>>>> kernel.MT7628_FDT.ulzma.uImage >>>>>>> >>>>>>> >>>>>>> But this didnt work. >>>>>>> >>>>>>> >>>>>>> >>>>>>> On 09/05/2017 01:17, Mori Hiroki wrote: >>>>>>>> Hi. >>>>>>>> >>>>>>>> I think if U-Boot work memory make > broken then >>>>>>>> Uncompressing Kernel Image is NG. >>>>>>>> >>>>>>>> Some ARM U-Boot is use top address > in work memory. >>>>>>>> If this case your kernel start > address to move to >>>>>>>> after work memory. But I never see > in MIPS. >>>>>>>> And What is set FDT_DTS_FILE in > your kernel configuration ? >>>>>>>> ----- Original Message ----- >>>>>>>> >>>>>>>>> From: Mike Wolman <mike@wolman.co.uk> >>>>>>>>> To: freebsd-mips@freebsd.org >>>>>>>>> Cc: >>>>>>>>> Date: 2017/5/9, Tue 07:48 >>>>>>>>> Subject: Re: onion omega2+ >>>>>>>>> >>>>>>>>> >>>>>>>>> More info in case anyone can > point me in the right direction. >>>>>>>>> I have found: >>>>>>>>> >>>>>>>>> https://forum.openwrt.org/ viewtopic.php?id=53865 >>>>>>>>> >>>>>>>>> I have tried changing how lzma > compresses the kernel by >>>>> adding -d20 to >>>>>>>>> the build scripts eg: >>>>>>>>> >>>>>>>>> /usr/local/bin/lzma e >>>>>>>>> >>>>> /home/mike/omega2/src/../root/ mipsel_ap/boot/kernel.MT7628_ FDT/kernel >>>>>>> \ >>>>>>>>> /home/mike/omega2/src/../ tftpboot/kernel.MT7628_FDT. lzma > -d20 >>>>>>>>> This did not work. >>>>>>>>> >>>>>>>>> >>>>>>>>> Looking at the onion omega conf > I see that it uses mkuzip and >>>>> not lzma >>>>>>>>> with the following settings: >>>>>>>>> >>>>>>>>> X_FSIMAGE_CMD="mkuzip" >>>>>>>>> X_FSIMAGE_ARGS="-L -d -s 65536 > -v" >>>>>>>>> X_FSIMAGE_SUFFIX=".ulzma" >>>>>>>>> >>>>>>>>> So tried the following: >>>>>>>>> >>>>>>>>> mkuzip -L -d -s 65536 -v -o > kernel.MT7628_FDT.ulzma >>>>> kernel.MT7628_FDT >>>>>>>>> mkimage -A mips -O linux -T > kernel -C lzma \ >>>>>>>>> -a 0x80001000 -e 0x80001100 > \ >>>>>>>>> -n "FreeBSD" -d > kernel.MT7628_FDT.lzma >>>>>>>>> kernel.MT7628_FDT.ulzma.uImage >>>>>>>>> >>>>>>>>> >>>>>>>>> But this did not work either. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On 08/05/2017 19:41, Aleksandr > Rybalko wrote: >>>>>>>>>> Hi Mike! >>>>>>>>>> >>>>>>>>>> I see you have no "OK" > after >>>>> "Uncompressing Kernel >>>>>>> Image >>>>>>>>> ...", so >>>>>>>>>> first point uboot > decompressor fail. >>>>>>>>>> Why fail? Because you have > wrong base address in image: >>>>>>>>>> Load Address: fffffff2 >>>>>>>>>> Entry Point: fffffff2 >>>>>>>>>> MIPS32 machines have RAM > mapped to 0x80000000 address, >>>>> so adding >>>>>>> its >>>>>>>>>> size, you will get max > address (if 16MB, it will be >>>>> 0x81000000), >>>>>>> but >>>>>>>>>> you uboot image was > created with 0xfffffff2. >>>>>>>>>> Even more, unpacked kernel > expects it will be called at >>>>>>> 0x80001100. so >>>>>>>>>> if you have ELF kernel > (file with ELF header, like >>>>> every >>>>>>> executable) >>>>>>>>>> that file have to be > loaded at (0x80001100 - >>>>> ELF_HEADER_SIZE). >>>>>>>>>> In most cases it will be > 0x80001100 - 0x100 = >>>>> 0x80001000. But >>>>>>> sometime >>>>>>>>>> (I did not found why) it > can be 0x20, you can find it >>>>> by looking >>>>>>> at >>>>>>>>>> .text section in readelf > -S. >>>>>>>>>> So if you have kernel with > entry point 0x80001100 and >>>>> .text >>>>>>> segment >>>>>>>>>> offset 0x100, you have to > create uboot image with load >>>>> address >>>>>>>>>> 0x80001000 and entry point > 0x80001100. >>>>>>>>>> If that step successful > you will get: >>>>>>>>>> /Uncompressing Kernel > Image/ ... OK >>>>>>>>>> Starting kernel ... >>>>>>>>>> >>>>>>>>>> Last line mean, uboot did > jump into kernel code. >>>>>>>>>> Good luck. >>>>>>>>>> >>>>>>>>>> 2017-05-07 18:20 GMT+03:00 > Mike Wolman >>>>> <mike@wolman.co.uk >>>>>>>>>> <mailto:mike@wolman.co.uk>>: >>>>>>>>>> >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> I am trying to get > FreeBSD working on this board - >>>>> I think I >>>>>>> am >>>>>>>>>> almost there in > getting it working but need some >>>>> help please. >>>>>>>>>> I have followed > instructions from the >>>>> freebsd-wifi-build and >>>>>>>>>> *think* I have got > everything correct - I am trying >>>>> to do >>>>>>> this on >>>>>>>>>> a CURRENT setup: >>>>>>>>>> >>>>>>>>>> FreeBSD > f64-current.mw.office 12.0-CURRENT FreeBSD >>>>>>> 12.0-CURRENT #0 >>>>>>>>>> r317887: Sun May 7 > 03:20:34 UTC 2017 >>>>>>>>>> >>>>>>> mike@f64-current.mw.office:/ usr/obj/usr/src/sys/GENERIC- NODEBUG amd64 >>>>>>>>>> $ cat > ~/.freebsd-wifi-build- settings.cfg >>>>>>>>>> X_SKIP_MORE_STUFF=YES >>>>>>>>>> > X_EXTRA_SRC_CONF=~/omega2/src. conf >>>>>>>>>> $ cat > ~/omega2/src.conf >>>>>>>>>> WITHOUT_CLANG=YES >>>>>>>>>> WITHOUT_CLANG_FULL=YES >>>>>>>>>> >>>>>>>>>> get dts files from > thread >>>>>>>>>> >>>>> http://community.onion.io/ topic/1099/openwrt-on-the- omega-2/8 >>>>>>>>>> >>>>>>> <http://community.onion.io/ topic/1099/openwrt-on-the- omega-2/8> >>>>>>>>>> cd > ~/omega2/src/sys/gnu/dts/mips >>>>>>>>>> fetch >>>>>>>>>> >>>>> https://raw.githubusercontent. com/WereCatf/source/image/ target/linux/ramips/dts/ OMEGA2.dtsi >>>>>>>>>> >>>>> <https://raw. githubusercontent.com/ WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dtsi> >>>>>>>>>> fetch >>>>>>>>>> >>>>> https://raw.githubusercontent. com/WereCatf/source/image/ target/linux/ramips/dts/ OMEGA2.dts >>>>>>>>>> >>>>> <https://raw. githubusercontent.com/ WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dts> >>>>>>>>>> fetch >>>>>>>>>> >>>>> https://raw.githubusercontent. com/WereCatf/source/image/ target/linux/ramips/dts/ OMEGA2P.dts >>>>>>>>>> >>>>> <https://raw. githubusercontent.com/ WereCatf/source/image/target/ linux/ramips/dts/OMEGA2P.dts> >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink >>>>> buildworld >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink >>>>> buildkernel >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink >>>>> installworld >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink >>>>> installkernel >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink >>>>> distribution >>>>>>>>>> >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink >>>>> mfsroot >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink >>>>> fsimage >>>>>>>>>> X_DTS_FILE=OMEGA2P.dts > KERNCONF=MT7628_FDT >>>>>>>>>> > ../freebsd-wifi-build/build/ bin/build ralink uboot >>>>>>>>>> >>>>>>>>>> Create flash: >>>>>>>>>> >>>>>>>>>> > X_FLASH=kernel.MT7628_FDT. lzma.flash >>>>>>>>>> dd if=/dev/zero bs=$(( > 0x200000 )) count=1 >>>>> of=${X_FLASH} >>>>>>>>>> dd > if=kernel.MT7628_FDT.lzma. uImage of=${X_FLASH} >>>>>>> conv=notrunc >>>>>>>>>> dd if= > mfsroot-ralink.img.lzma >> ${X_FLASH} >>>>>>>>>> >>>>>>>>>> $ readelf -h > kernel.MT7628_FDT | grep Entry >>>>>>>>>> Entry point > address: 0x80001100 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Now on the omega over > serial - I didnt get the >>>>> network >>>>>>> expansion >>>>>>>>>> doc thing so am doing > stuff with usb rather than >>>>> tftp >>>>>>>>>> I am not 100% sure > about the 0x80001100 and the >>>>> fatload and >>>>>>> have >>>>>>>>>> tried this >>>>>>>>>> >>>>>>>>>> Omega2 # fatload usb > 0:1 0x80001100 >>>>>>> /kernel.MT7628_FDT.lzma.flash >>>>>>>>>> * >>>>>>>>>> * >>>>>>>>>> Reading file >>>>> "/kernel.MT7628_FDT.lzma. flash" >>>>>>>>>> * >>>>>>>>>> ** >>>>>>>>>> ** >>>>>>>>>> ** >>>>>>>>>> ****** >>>>>>>>>> >>>>> ****************************** ****************************** ****************************** ****************************** ********************* >>>>>>>>>> ****** >>>>>>>>>> * >>>>>>>>>> FAT: 2108463 Bytes > read >>>>>>>>>> Omega2 # bootm > 0x80001100 >>>>>>>>>> ## Booting image at > 80001100 ... >>>>>>>>>> Image Name: > FreeBSD >>>>>>>>>> Image Type: MIPS > Linux Kernel Image (lzma >>>>> compressed) >>>>>>>>>> Data Size: > 1365122 Bytes = 1.3 MB >>>>>>>>>> Load Address: > fffffff2 >>>>>>>>>> Entry Point: > fffffff2 >>>>>>>>>> Verifying Checksum > ... OK >>>>>>>>>> Uncompressing > Kernel Image ... >>>>>>>>>> >>>>>>>>>> At this point nothing > happens and console hangs - >>>>> note in >>>>>>>>>> OMEGA2.dtsithe console > is set to ttyS0: >>>>>>>>>> bootargs = > "console=ttyS0,115200"; >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I have also tried with > just kernel.MT7628_FDT and >>>>>>>>>> kernel.MT7628_FDT.lzma > but both fail: >>>>>>>>>> Omega2 # fatload usb > 0:1 0x80001100 >>>>>>> /kernel.MT7628_FDT.lzma.uImage >>>>>>>>>> * >>>>>>>>>> * >>>>>>>>>> Reading file >>>>> "/kernel.MT7628_FDT.lzma. uImage" >>>>>>>>>> * >>>>>>>>>> ** >>>>>>>>>> ** >>>>>>>>>> ****** >>>>>>>>>> >>>>> ****************************** ****************************** ****************************** ****************************** ****** >>>>>>>>>> ********** >>>>>>>>>> * >>>>>>>>>> FAT: 1365186 Bytes > read >>>>>>>>>> Omega2 # bootm > 0x80001100 >>>>>>>>>> ## Booting image at > 80001100 ... >>>>>>>>>> Image Name: > FreeBSD >>>>>>>>>> Image Type: MIPS > Linux Kernel Image (lzma >>>>> compressed) >>>>>>>>>> Data Size: > 1365122 Bytes = 1.3 MB >>>>>>>>>> Load Address: > fffffff2 >>>>>>>>>> Entry Point: > fffffff2 >>>>>>>>>> Verifying Checksum > ... OK >>>>>>>>>> Uncompressing > Kernel Image ... >>>>>>>>>> >>>>>>>>>> A few comments on the > hardware for anyone who wants >>>>> to get >>>>>>> one: >>>>>>>>>> Get the expansion dock > with serial port access - >>>>> the power >>>>>>> dock >>>>>>>>>> does not provide > serial access - i think it is >>>>> possible to >>>>>>> use an >>>>>>>>>> ftdi ttl serial > chip/cable but have not tried. >>>>>>>>>> Stupidly I forgot this > only has wifi access so you >>>>> are not >>>>>>> able to >>>>>>>>>> tftp boot this without > getting the ethernet network >>>>> expansion >>>>>>> but >>>>>>>>>> loading stuff up from > a usb memory stick is seem >>>>> fine from >>>>>>> u-boot. >>>>>>>>>> I do not think that it > is possible to boot from the >>>>> SD card >>>>>>> on the >>>>>>>>>> Omega2+ - which is a > shame. >>>>>>>>>> Thanks for reading, >>>>>>>>>> >>>>>>>>>> Mike. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> > ______________________________ _________________ >>>>>>>>>> freebsd-mips@freebsd.org >>>>>>> <mailto:freebsd-mips@freebsd. org>mailing >>>>>>>>> list >>>>>>>>>> >>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips >>>>>>>>>> >>>>>>> <https://lists.freebsd.org/ mailman/listinfo/freebsd-mips> >>>>>>>>>> To unsubscribe, send > any mail to >>>>>>>>>> "freebsd-mips-unsubscribe@ freebsd.org >>>>>>>>>> >>>>> <mailto:freebsd-mips- unsubscribe@freebsd.org>" >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> WBW >>>>>>>>>> ------- >>>>>>>>>> Rybalko Aleksandr <ray@ddteam.net >>>>>>> <mailto:ray@ddteam.net>> >>>>>>>>> ______________________________ _________________ >>>>>>>>> freebsd-mips@freebsd.org mailing list >>>>>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips >>>>>>>>> To unsubscribe, send any mail to >>>>>>>>> "freebsd-mips-unsubscribe@ freebsd.org" >>>>>>>>> >>>> ______________________________ _________________ >>>> freebsd-mips@freebsd.org mailing list >>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips >>>> To unsubscribe, send any mail to "freebsd-mips-unsubscribe@ freebsd.org" >>>> >>> >>> -- >>> >>> WBW >>> ------- >>> Rybalko Aleksandr <ray@ddteam.net> >>> >>> >> >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6f1b2d35-5d17-765a-6138-0ab85455fc09>