Date: Mon, 8 Dec 2003 20:28:16 -0800 From: John Stockdale <jstockdale@stanford.edu> To: freebsd-smp@freebsd.org Subject: IGNORE: Logical CPU's not being picked up on dual 2.0 Xeon system. Message-ID: <1C3AC0B6-2A00-11D8-A35F-000393A6EB58@stanford.edu> In-Reply-To: <39D3B1EE-29FF-11D8-A35F-000393A6EB58@stanford.edu> References: <39D3B1EE-29FF-11D8-A35F-000393A6EB58@stanford.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Realized that hyperthreading is working, but only 1 physical cpu is
being picked up.
Gonna troubleshoot this one and get back to the list if I can't figure
it out.
Sorry for the errant email
-John
On Dec 8, 2003, at 8:21 PM, John Stockdale wrote:
> Hey everyone,
>
> I just CVSup'd to current source, built a new system. Since the
> APIC_IO option was removed from the latest kernel, I went ahead and
> added the device apic line to my kernel config, built and installed it
> all (no other changes were made ie. the SMP option is still there).
> Now, I only see the 2 physical CPU's and neither logical CPU.
>
> dmesg.boot and sysctl machdev outputs attached.
>
> Anyone have any ideas? I'm kinda confused with this one.
>
> Thanks
>
> John Stockdale
> Stanford University
>
> -------sysctl machdep--------
> machdep.consdev: { major = 0, minor = 0 }
> machdep.adjkerntz: 28800
> machdep.disable_rtc_set: 0
> machdep.wall_cmos_clock: 1
> machdep.conrclk: 1843200
> machdep.gdbspeed: 9600
> machdep.conspeed: 9600
> machdep.enable_panic_key: 0
> machdep.disable_mtrrs: 0
> machdep.cpu_idle_hlt: 1
> machdep.guessed_bootdev: 2686451712
> machdep.hlt_cpus: 0
> machdep.panic_on_nmi: 1
> machdep.tsc_freq: 1999442652
> machdep.i8254_freq: 1193182
> machdep.acpi_root: 1010336
>
> ----------dmesg.boot--------
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> The Regents of the University of California. All rights
> reserved.
> FreeBSD 5.2-CURRENT #0: Mon Dec 8 17:32:58 PST 2003
>
> jstockdale@XXXXXX.Stanford.EDU:/usr/obj/usr/src/sys/SMPKernel20031208
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0834000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08342bc.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.00GHz (1999.44-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
> E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory = 1073217536 (1023 MB)
> avail memory = 1033175040 (985 MB)
> MPTable: < PLACER CRB >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 6
> ioapic0: Assuming intbase of 0
> ioapic1: Assuming intbase of 24
> ioapic2: Assuming intbase of 48
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> Pentium Pro MTRR support enabled
> ACPI-0314: *** Error: Invalid signature where RSDP indicates
> RSDT/XSDT should be located
> ACPI-0181: *** Error: AcpiLoadTables: Could not load RSDT:
> AE_BAD_SIGNATURE
> ACPI-0213: *** Error: AcpiLoadTables: Could not load tables:
> AE_BAD_SIGNATURE
> ACPI: table load failed: AE_BAD_SIGNATURE
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcibios: BIOS version 2.10
> Using $PIR table, 23 entries at 0xc00fde50
> pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> pcib0: slot 29 INTA routed to irq 16
> pcib0: slot 29 INTB routed to irq 19
> pcib0: slot 29 INTC routed to irq 18
> pcib0: slot 29 INTD routed to irq 23
> pcib0: slot 31 INTB routed to irq 17
> agp0: <Intel Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at
> device 0.0 on pci0
> pci0: <unknown> at device 0.1 (no driver attached)
> pcib1: <MPTable PCI-PCI bridge> mem 0xe8000000-0xefffffff at device
> 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib1: slot 0 INTA routed to irq 17
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pcib2: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
> pci2: <PCI bus> on pcib2
> pci2: <base peripheral, interrupt controller> at device 28.0 (no
> driver attached)
> pcib3: <MPTable PCI-PCI bridge> at device 29.0 on pci2
> pci3: <PCI bus> on pcib3
> pcib3: slot 2 INTA routed to irq 28
> twe0: <3ware 7000 series Storage Controller. Driver version
> 1.50.00.000> port 0x2000-0x200f mem
> 0xda800000-0xdaffffff,0xda100000-0xda10000f irq 28 at device 2.0 on
> pci3
> twe0: 8 ports, Firmware FE7X 1.05.00.036, BIOS BE7X 1.08.00.044
> pci2: <base peripheral, interrupt controller> at device 30.0 (no
> driver attached)
> pcib4: <PCI-PCI bridge> at device 31.0 on pci2
> pci4: <PCI bus> on pcib4
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1840-0x185f
> irq 16 at device 29.0 on pci0
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1860-0x187f
> irq 19 at device 29.1 on pci0
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1880-0x189f
> irq 18 at device 29.2 on pci0
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib5: <MPTable PCI-PCI bridge> at device 30.0 on pci0
> pci5: <PCI bus> on pcib5
> pcib5: slot 1 INTA routed to irq 22
> pcib5: slot 2 INTA routed to irq 17
> pcib5: slot 3 INTA routed to irq 16
> twe1: <3ware 7000 series Storage Controller. Driver version
> 1.50.00.000> port 0x3040-0x304f mem
> 0xdb000000-0xdb7fffff,0xdb804800-0xdb80480f irq 22 at device 1.0 on
> pci5
> twe1: 2 ports, Firmware FE7X 1.05.00.036, BIOS BE7X 1.08.00.044
> pci5: <serial bus, FireWire> at device 2.0 (no driver attached)
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port
> 0x3000-0x303f mem 0xdb820000-0xdb83ffff irq 16 at device 3.0 on pci5
> em0: Speed:N/A Duplex:N/A
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port
> 0x18a0-0x18af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH4 (82801DB)> port 0x1800-0x183f,0x1400-0x14ff mem
> 0xd8000800-0xd80008ff,0xd8000c00-0xd8000dff irq 17 at device 31.5 on
> pci0
> pcm0: <Analog Devices AD1981A AC97 Codec>
> orm0: <Option ROMs> at iomem
> 0xe0000-0xe3fff,0xd3000-0xd3fff,0xd1800-0xd27ff,0xd0000-0xd17ff on
> isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A, console
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0c02> can't assign resources (memory)
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> fdc1: cannot reserve I/O port range (1 ports)
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert disabled, rule-based forwarding enabled,
> default to deny, logging limited to 128 packets/entry by default
> twed0: <Unit 0, RAID5, Normal> on twe0
> twed0: 1361360MB (2788065280 sectors)
> GEOM: create disk twed0 dp=0xc6b2c10c
> twed1: <Unit 0, TwinStor, Normal> on twe1
> twed1: 76318MB (156299440 sectors)
> GEOM: create disk twed1 dp=0xc6b26f0c
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/twed1s1a
>
> _______________________________________________
> freebsd-smp@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
> To unsubscribe, send any mail to "freebsd-smp-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1C3AC0B6-2A00-11D8-A35F-000393A6EB58>